Gwynedd · Wales
Automatic bollard repairs in Bangor, Gwynedd
Auto bollard repairs for sites in Bangor, Gwynedd and the rest of Gwynedd, by crews working under our management.
Computer-generated imageAbout auto bollard repairs in Bangor, Gwynedd
Repairs start with finding the cause, then making the bollard safe and replacing or adjusting the failed part. Around Bangor, Gwynedd, that usually means sites such as filling-station forecourts, small industrial units and town-centre squares.
We work across LL57 — Bangor, Gwynedd itself and places including Bethesda, Rachub, Rhiwlas and Tregarth. We also cover neighbouring Caernarfon (8.3 miles), Llandudno (14 miles) and Colwyn Bay (17.3 miles) — distances are straight-line.
Key facts for this area
- Area
- Gwynedd, Wales
- Highway authority
- Gwynedd Council (local roads)
- Planning authority
- Gwynedd Council
- Postcodes
- LL57
- Guide price
- Typically £145–£2,445 per repair + VAT
- Survey
- Paid visit, price confirmed in writing first
- Nearby
- Caernarfon (8.3 mi), Llandudno (14 mi), Colwyn Bay (17.3 mi)
Bangor, Gwynedd: typical automatic bollard repair prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £145–£1,095 + VAT | Diagnostic visit and minor fault fix |
| Upgraded | £825–£1,795 + VAT | Component repair: loop, controller or photocell |
| Premium | £1,495–£2,445 + VAT | Major part: hydraulic unit, ram or bollard head |
Per repair, from a diagnostic visit to a replacement hydraulic unit or head; -3% for Wales. Guide only — the visit price is confirmed in writing first.
Why Bangor, Gwynedd sites book auto bollard repairs
Typical reasons for auto bollard repairs in Bangor, Gwynedd:
- Slow, jerky or noisy rising and lowering
- Bollards that rise or fall on their own
- Hydraulic oil leaks around the head or pit
Permissions and groundwork in Bangor, Gwynedd
In Bangor, Gwynedd the highway authority for local roads is Gwynedd Council. We confirm whether the ground is adopted highway before quoting, because bollards on a public footway need its agreement first.
If your site in Bangor, Gwynedd is listed or inside a conservation area, check with the local planning authority (Gwynedd Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Resurfacing contractors often cut through loops and ducts without realising they are there, so it is worth pointing them out before any roadworks. Many automatic bollard faults start in the ground.
- Collect and clean up hydraulic fluid leaks properly to avoid contaminating drains and ground.
- Have electrical repairs carried out by a qualified electrician to BS 7671.
From survey to handover
Describe the fault
Tell us what the bollard is doing, any lights or messages on the controller, recent weather or roadworks, and send photographs of the bollard, pit and controller.
Diagnose the cause
Fault logs, loops, drive, electrics and pit are checked in turn to find the underlying cause rather than just the symptom.
Test and report
After the repair, every safety device and access input is tested with vehicles, and you receive a written report of the fault, cause and work done.
Choosing the right spec
| Option | Detail |
|---|---|
| Heads and covers | Replacement heads, covers, reflective bands and light rings after impact damage. |
| Loop replacement | New safety and exit loops cut into sound surface, with detectors retuned and tested. |
| Make safe | Locking the bollard down or securing it up, with cones and signs, so the entrance is safe while a repair is arranged. |
Pricing auto bollard repairs in Bangor, Gwynedd
When we price auto bollard repairs in Bangor, Gwynedd, these make the biggest difference:
- Impact damage to heads, cassettes or foundations
- Nature of the fault and time needed to diagnose it
- Loop replacement and surface repairs
Keeping them working
Tell anyone resurfacing or digging nearby where loops, ducts and drains run. Between visits, keep the bollard head clear, report changes in speed or sound promptly and keep a simple log of faults with times and dates, which speeds diagnosis.
If posts in Bangor, Gwynedd are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Which parts of Bangor, Gwynedd do you cover for auto bollard repairs?
We cover all of Bangor, Gwynedd (LL57) and the rest of Gwynedd. We also work in Caernarfon, Llandudno and Colwyn Bay.
Do I need consent for bollards on a public footway in Bangor, Gwynedd?
Before digging near the kerb in Bangor, Gwynedd we establish who owns the ground: adopted footways are Gwynedd Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
What's a typical price for auto bollard repairs in Bangor, Gwynedd?
In Bangor, Gwynedd, typically £145–£2,445 per repair, from a diagnostic visit to a replacement hydraulic unit or head, plus VAT, using our Wales guide prices. We confirm the visit price in writing before attending.
Can you repair automatic bollards you did not install?
Yes, for common makes of hydraulic and electro-mechanical bollard. Some parts are proprietary and sourced through the manufacturer or distributor. Make and model details help us prepare.
Our automatic bollard is stuck up: what should we do now?
Keep vehicles and people clear and do not try to force it. If you have a manual release key and know the procedure, you can lower it; otherwise cone it off. Then contact us with photographs and a description so we can price the visit.