Northern Ireland · 2 towns
Automatic rising bollard installation in Mid Ulster
Automatic bollards for sites across Mid Ulster: surveyed, quoted in writing and installed by our crews.
Computer-generated imageAutomatic bollards in Mid Ulster
We supply and install automatic bollards across Mid Ulster, with local pages for 2 towns below. Hydraulic and electro-mechanical rising bollards installed with controls, safety loops, signals and power, for managed vehicle access.
Across Northern Ireland, DfI Roads (the Department for Infrastructure) is the roads authority for public roads and footways; councils handle planning.
Choose your town in Mid Ulster
Guide prices in Mid Ulster
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,945–£7,895 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £6,445–£11,395 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £9,995–£14,695 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; -2% for Northern Ireland. Guide only — the fixed price follows a survey.
Highway and planning authorities in Mid Ulster
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Dungannon | the Department for Infrastructure (DfI Roads) | Mid Ulster District Council |
| Cookstown | the Department for Infrastructure (DfI Roads) | Mid Ulster District Council |
Rules for automatic bollards in Northern Ireland
Bollards on public footways and roads need DfI Roads consent under the Roads (NI) Order 1993; councils deal with planning. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Rising bollards should fail safe, never rise beneath a vehicle, carry clear signs and give the emergency services an override.
Details and sources: bollard rules in Northern Ireland.
How installation works
Excavate and set cassettes
Each cassette pit is excavated to the manufacturer's depth, with the base prepared to drain. Cassettes are set to finished road level and fall, then concreted in.
Ducts, drainage and loops
Ducts are laid between the bollards, the controller cabinet and access devices, with draw pits where runs change direction. The drain is connected and the safety and exit loops are cut into the surface and sealed.
Commission and test
Rise and fall times, loop detection, photocells, lights and the manual release are tested with vehicles present. Safety settings are recorded against the risk assessment.
Train and hand over
Site staff are shown how to lower the bollard in an emergency and how to recognise faults. You receive keys, the commissioning record and the manufacturer's manuals.
Automatic bollards in Mid Ulster: FAQs
Do you cover all of Mid Ulster for automatic bollards?
Yes — including Dungannon and Cookstown. Enter your postcode in the price calculator to confirm.
How much do automatic bollards cost in Mid Ulster?
In Mid Ulster, typically £2,945–£14,695 per bollard, installed with controls, loops and commissioning, plus VAT, using our Northern Ireland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Mid Ulster?
DfI Roads (the Department for Infrastructure) is the roads authority for public roads and footways throughout Northern Ireland; councils handle planning.
Why do automatic bollards need drainage?
The bollard sits in a pit that collects rain and silt. Without a drain, water corrodes the mechanism, short-circuits electrics and can freeze the post in place. A drain connection is part of every automatic installation we carry out.
How will emergency vehicles get through?
Usually by an agreed method such as a fire service key switch, a code, a remote handset held by the site or a free-exit arrangement. It should be agreed with the emergency services before the bollards go live.