Scotland · 3 towns
Automatic rising bollard installation in Midlothian
Automatic bollards for sites across Midlothian: surveyed, quoted in writing and installed by our crews.
Computer-generated imageAutomatic bollards in Midlothian
Across Midlothian, typical sites for automatic bollards include small industrial units, community car parks and high street shopfronts. Hydraulic and electro-mechanical rising bollards installed with controls, safety loops, signals and power, for managed vehicle access.
Highway and roads authorities for local roads in Midlothian: Midlothian Council.
Choose your town in Midlothian
Guide prices in Midlothian
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,995–£8,045 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £6,595–£11,595 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £10,195–£14,995 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; no regional adjustment. Guide only — the fixed price follows a survey.
Highway and planning authorities in Midlothian
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Bonnyrigg | Midlothian Council | Midlothian Council |
| Penicuik | Midlothian Council | Midlothian Council |
| Dalkeith | Midlothian Council | Midlothian Council |
Rules for automatic bollards in Scotland
Works in a public road or footway need the roads authority's written consent under the Roads (Scotland) Act 1984. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Rising bollards should fail safe, never rise beneath a vehicle, carry clear signs and give the emergency services an override.
Details and sources: bollard rules in Scotland.
How installation works
Excavate and set cassettes
Each cassette pit is excavated to the manufacturer's depth, with the base prepared to drain. Cassettes are set to finished road level and fall, then concreted in.
Power and controls
A qualified electrician installs the supply and isolation, and the controller, traffic lights, photocells and access devices are mounted and wired.
Commission and test
Rise and fall times, loop detection, photocells, lights and the manual release are tested with vehicles present. Safety settings are recorded against the risk assessment.
Train and hand over
Site staff are shown how to lower the bollard in an emergency and how to recognise faults. You receive keys, the commissioning record and the manufacturer's manuals.
Automatic bollards in Midlothian: FAQs
Do you cover all of Midlothian for automatic bollards?
Yes — including Bonnyrigg, Penicuik and Dalkeith. Enter your postcode in the price calculator to confirm.
How much do automatic bollards cost in Midlothian?
In Midlothian, typically £2,995–£14,995 per bollard, installed with controls, loops and commissioning, plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Midlothian?
The council is the roads authority for local roads (Midlothian Council); Transport Scotland covers trunk roads. Works in a public road need the roads authority's written consent.
Should I choose hydraulic or electro-mechanical bollards?
Choose by how often the bollard will move and how you want it maintained. Hydraulic units suit busy entrances and heavier rated posts but need fluid and seal checks. Electro-mechanical units avoid fluid and are often simpler to look after at moderate traffic levels.
What stops a rising bollard hitting a car?
A safety loop in the road detects a vehicle above or close to the bollard and blocks the rise, backed up by photocells. Traffic lights and head lights tell drivers when to stop. The settings are tested on site with vehicles before handover.