Pembrokeshire · Wales
Automatic rising bollard installation in Haverfordwest
Local installation of automatic bollards in Haverfordwest — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageHaverfordwest automatic bollards
From filling-station forecourts, small industrial units and high street shopfronts, Haverfordwest has plenty of places where automatic bollards earn their keep. Hydraulic and electro-mechanical rising bollards installed with controls, safety loops, signals and power, for managed vehicle access.
Coverage in Haverfordwest takes in the SA61 and SA62 postcode districts and nearby places like Merlin's Bridge, Slade, Johnston and Broad Haven. Nearby, we also work in Milford Haven (6.7 miles), measured as the crow flies.
Local details
- Area
- Pembrokeshire, Wales
- Highway authority
- Pembrokeshire County Council (local roads)
- Planning authority
- Pembrokeshire County Council
- Postcodes
- SA61 and SA62
- Guide price
- Typically £2,895–£14,595 per bollard + VAT
- Survey
- Free, with a fixed written quote
- Nearby
- Milford Haven (6.7 mi)
Guide prices for Haverfordwest
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,895–£7,795 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £6,395–£11,295 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £9,895–£14,595 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; -3% for Wales. Guide only — the fixed price follows a survey.
Automatic bollards in Haverfordwest: common uses
Typical reasons Haverfordwest sites choose automatic bollards:
- Business parks and campus roads with controlled vehicle access
- Entrances where a gate would block pedestrian desire lines
- Pedestrianised streets with permitted delivery windows
Permissions and groundwork in Haverfordwest
Before digging near the kerb in Haverfordwest we establish who owns the ground: adopted footways are Pembrokeshire County Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
Many private-land installations in Haverfordwest need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Pembrokeshire County Council before posts go in.
Automatic bollards need a deep pit for the cassette and a reliable way for water to leave it. Duct routes cross the carriageway and often the footway, so buried services along those routes must be traced first.
- Prepare a written risk assessment covering pedestrians, cyclists, following vehicles and children, and choose safety devices to match.
- On public highway, rising bollards normally need highway authority approval, with signs and signals to their requirements.
Installation, step by step
Survey and risk assessment
A free site survey covers traffic patterns, who uses the entrance, power, drainage routes and buried services. We draft the safety arrangement from that, and you receive a fixed written quote.
Excavate and set cassettes
Each cassette pit is excavated to the manufacturer's depth, with the base prepared to drain. Cassettes are set to finished road level and fall, then concreted in.
Power and controls
A qualified electrician installs the supply and isolation, and the controller, traffic lights, photocells and access devices are mounted and wired.
Finishes and options
| Option | Detail |
|---|---|
| Fail-safe behaviour | Configured to lower or stay raised on power loss, with a manual release, depending on whether access or security takes priority. |
| Paired or multi-bollard lanes | Several bollards can run from one controller to close a wider entrance, with lane-by-lane control where needed. |
| Unrated or crash-rated | Unrated units control traffic; rated units are tested to IWA 14-1, ISO 22343-1 or PAS 68 for security entrances, with deeper, heavier foundations. |
What moves the price in Haverfordwest
Our Wales guide prices are a starting point; the survey in Haverfordwest firms them up. What tends to move them:
- Surface condition for loops and the extent of reinstatement
- Unrated or crash-rated model and its foundation size
- Number of bollards and lanes controlled
After installation
Between visits, site staff should keep the head clear of grit and leaves, report slow or noisy movement early and never override safety devices to keep an entrance open. Automatic bollards need planned servicing, not just repair when they fail.
We can also service, repair or replace existing posts anywhere in Haverfordwest.
Common questions
Which parts of Haverfordwest do you cover for automatic bollards?
We cover all of Haverfordwest (SA61 and SA62) and the rest of Pembrokeshire. We also work in Milford Haven.
Do I need consent for automatic bollards on a public footway in Haverfordwest?
Before digging near the kerb in Haverfordwest we establish who owns the ground: adopted footways are Pembrokeshire County Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
What's a typical price for automatic bollards in Haverfordwest?
In Haverfordwest, typically £2,895–£14,595 per bollard, installed with controls, loops and commissioning, plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
What happens in a power cut?
That depends on how the system is configured. Traffic bollards are often set to lower or can be lowered with a manual release, so vehicles are not trapped. Security bollards may be set to stay raised, with a procedure for staff to follow.
Should I choose hydraulic or electro-mechanical bollards?
Choose by how often the bollard will move and how you want it maintained. Hydraulic units suit busy entrances and heavier rated posts but need fluid and seal checks. Electro-mechanical units avoid fluid and are often simpler to look after at moderate traffic levels.