Bollard Installers

England · 10 towns

Access control for automatic bollards in Nottinghamshire

Bollard access control for sites across Nottinghamshire: surveyed, quoted in writing and installed by our crews.

Camera post and keypad pedestal beside three automatic rising bollards at a business park entranceComputer-generated image

Bollard access control in Nottinghamshire

Across Nottinghamshire, typical sites for bollard access control systems include university campuses, pedestrianised streets and city-centre plazas. ANPR, fob, keypad, intercom and remote control systems that decide who can lower an automatic bollard, and when.

Highway authorities for local roads in Nottinghamshire: Nottingham City Council and Nottinghamshire County Council.

Choose your town in Nottinghamshire

Guide prices in Nottinghamshire

SpecificationGuide priceIncludes
Standard£585–£5,295 + VATRemote fobs or a standalone keypad
Upgraded£3,945–£8,645 + VATGSM intercom with keypad on a post
Premium£7,295–£11,795 + VATANPR camera, software and integration

Per entrance, controls supplied, installed and commissioned; -2% for East Midlands. Guide only — the fixed price follows a survey.

Local authorities across Nottinghamshire

TownHighway / roads authorityPlanning authority
NottinghamNottingham City CouncilNottingham City Council
MansfieldNottinghamshire County Councilthe council for Mansfield
WorksopNottinghamshire County Councilthe council for Bassetlaw
Newark-on-TrentNottinghamshire County Councilthe council for Newark and Sherwood
ArnoldNottinghamshire County Councilthe council for Gedling
West BridgfordNottinghamshire County Councilthe council for Rushcliffe
Sutton-in-AshfieldNottinghamshire County Councilthe council for Ashfield
HucknallNottinghamshire County Councilthe council for Ashfield
Kirkby-in-AshfieldNottinghamshire County Councilthe council for Ashfield
RetfordNottinghamshire County Councilthe council for Bassetlaw

Rules for bollard access control systems in England

Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Rising bollards should fail safe, never rise beneath a vehicle, carry clear signs and give the emergency services an override.

Details and sources: bollard rules in England.

How installation works

Understand the users

At the free site survey we ask who uses the entrance, how many, how often they change, and how visitors and deliveries arrive. That decides the entry method, and a fixed written quote follows.

Lay ducts and pedestals

Ducts are laid from the controller to each device, and pedestals or posts are set in concrete. Loops for exit and detection are cut and sealed.

Wire and connect

A qualified electrician installs power, and devices are connected to the bollard controller and to any network or building system.

Hand over

You are shown how to add and remove users, read logs and use the emergency override. Credentials and settings are recorded.

Bollard access control in Nottinghamshire: FAQs

Do you cover all of Nottinghamshire for bollard access control systems?

Yes — including Nottingham, Mansfield, Worksop, Newark-on-Trent, Arnold, West Bridgford, Sutton-in-Ashfield and Hucknall. Enter your postcode in the price calculator to confirm.

How much do bollard access control systems cost in Nottinghamshire?

In Nottinghamshire, typically £585–£11,795 per entrance, controls supplied, installed and commissioned, plus VAT, using our East Midlands guide prices. The fixed figure comes in writing after we've seen the site.

Who do I ask about bollards on public land in Nottinghamshire?

For local roads, Nottingham City Council and Nottinghamshire County Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.

Can the fire brigade open the bollards?

They should be able to, through an override agreed with them, such as a key switch, a code or a link to the fire alarm. We test the arrangement before handover. It should be reviewed if the site changes.

Can new access control be added to our existing bollards?

Often, yes, if the bollard controller can accept the new devices. We check the existing controller and cabling first. Very old controllers sometimes need replacing at the same time.

Other services in Nottinghamshire

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote