Shropshire · England
Access control for automatic bollards in Shrewsbury
Bollard access control systems supplied and fitted in Shrewsbury, Shropshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout bollard access control systems in Shrewsbury
ANPR, fob, keypad, intercom and remote control systems that decide who can lower an automatic bollard, and when. In Shrewsbury, that tends to mean sites such as college campuses, leisure centres and business parks.
Coverage in Shrewsbury takes in the SY1, SY2, SY3 and SY5 postcode districts and nearby places like Bayston Hill, Bicton, Pulley and Lythbank. Jobs in Shrewsbury can be combined with work in Wellington (9.9 miles) and Telford (12.9 miles) (straight-line distances). Shrewsbury is about 28 miles from Wolverhampton.
Local details
- Area
- Shropshire, England
- Highway authority
- Shropshire Council (local roads)
- Planning authority
- Shropshire Council
- Postcodes
- SY1, SY2, SY3 and SY5
- Guide price
- Typically £595–£11,995 per entrance + VAT
- Survey
- Free, with a fixed written quote
- Nearby
- Wellington (9.9 mi), Telford (12.9 mi)
Guide prices for Shrewsbury
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £595–£5,395 + VAT | Remote fobs or a standalone keypad |
| Upgraded | £3,995–£8,795 + VAT | GSM intercom with keypad on a post |
| Premium | £7,445–£11,995 + VAT | ANPR camera, software and integration |
Per entrance, controls supplied, installed and commissioned; no regional adjustment. Guide only — the fixed price follows a survey.
Bollard access control systems in Shrewsbury: common uses
Typical reasons Shrewsbury sites choose bollard access control systems:
- Upgrading old keypads or handsets on existing bollards
- Visitor and contractor access managed from a reception or remotely
- Residential estates and mews with controlled vehicle access
Permissions and groundwork in Shrewsbury
The highway authority for local roads in Shrewsbury is Shropshire Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Shrewsbury is listed or inside a conservation area, check with the local planning authority (Shropshire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Where existing bollards are being upgraded, old cables and ducts are tested before being reused. Access control adds duct runs, pedestals and loops to a bollard installation, and each means cutting into the surface.
- Keep access requests and safety devices separate, so an access device can never force a bollard to rise while a vehicle is over it.
- If you use ANPR or video, check your obligations for handling personal data, including signage, a privacy notice and how long records are kept.
How the job runs
Lay ducts and pedestals
Ducts are laid from the controller to each device, and pedestals or posts are set in concrete. Loops for exit and detection are cut and sealed.
Wire and connect
A qualified electrician installs power, and devices are connected to the bollard controller and to any network or building system.
Hand over
You are shown how to add and remove users, read logs and use the emergency override. Credentials and settings are recorded.
Specification choices
| Option | Detail |
|---|---|
| Exit loops and timers | Loops lower the bollard for vehicles leaving; timers hold it down during set windows. |
| ANPR cameras | Read number plates and compare them with an approved list. Suited to large user groups and hands-free entry; needs careful camera placement and lighting. |
| Keypads | Code entry for small groups or as a backup. Simple to manage, but codes spread, so change them regularly. |
Pricing bollard access control systems in Shrewsbury
When we price bollard access control systems in Shrewsbury, these make the biggest difference:
- Entry method chosen and number of devices
- Number of users and how they will be managed
- Integration with existing access control or fire systems
After installation
Test exit loops and emergency overrides at each service visit. Remove users, fobs and plates when people leave, change keypad codes periodically and check that intercom phone numbers are still current.
For damaged or loose posts in Shrewsbury, repairs and replacements are priced in writing first.
Common questions
Do you install bollard access control systems in Shrewsbury?
We cover all of Shrewsbury (SY1, SY2, SY3 and SY5) and the rest of Shropshire. We also work in Wellington and Telford.
Do I need consent for bollards on a public footway in Shrewsbury?
In Shrewsbury, work on adopted pavements and verges needs consent from Shropshire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do bollard access control systems cost in Shrewsbury?
In Shrewsbury, typically £595–£11,995 per entrance, controls supplied, installed and commissioned, plus VAT, using our West Midlands guide prices. The fixed figure comes in writing after we've seen the site.
Do ANPR cameras at our entrance raise data protection issues?
They collect personal data, so you need to handle it properly, including signage, a privacy notice and sensible retention periods. Your data protection adviser can confirm what applies to your site. We can set retention and access options on the system to match.
Is ANPR or fob access better for an automatic bollard?
ANPR suits sites with many regular users who should not have to stop or carry a fob. Fobs suit sites where users change vehicles or where you want each person to have their own credential. Many sites use ANPR for staff and an intercom for visitors.