Blaenau Gwent · Wales
Bollard removal in Ebbw Vale
Bollard removal jobs supplied and fitted in Ebbw Vale, Blaenau Gwent: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout bollard removal jobs in Ebbw Vale
Bollard removal jobs suit plenty of Ebbw Vale sites, small industrial units, residential driveways and community car parks among them. Posts can be cut off at or below ground level or fully extracted with their concrete.
We work across NP23 — Ebbw Vale itself and places including Nantyglo and Cwm. Jobs in Ebbw Vale can be combined with work in Tredegar (1.7 miles), Abertillery (4.5 miles), Bargoed (6.6 miles) and Merthyr Tydfil (7.5 miles) (straight-line distances). It sits roughly 21 miles from Cardiff as the crow flies.
Key facts for this area
- Area
- Blaenau Gwent, Wales
- Highway authority
- Blaenau Gwent County Borough Council (local roads)
- Planning authority
- Blaenau Gwent County Borough Council
- Postcodes
- NP23
- Guide price
- Typically £80–£335 per post + VAT (£95–£395 inc VAT for homes); minimum job £285
- Survey
- Free, with a fixed written quote
- Nearby
- Tredegar (1.7 mi), Abertillery (4.5 mi), Bargoed (6.6 mi), Merthyr Tydfil (7.5 mi)
Common reasons for bollard removal jobs in Ebbw Vale
Typical reasons for bollard removal jobs in Ebbw Vale:
- Car park and forecourt redesigns
- Removing redundant lighting bollards
- Decommissioning automatic bollards that are no longer used
Bollard removal prices in Ebbw Vale
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £225–£335 + VAT · £265–£395 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; -3% for Wales. Guide only — the fixed price follows a survey.
Consents, ground and services in Ebbw Vale
Before digging near the kerb in Ebbw Vale we establish who owns the ground: adopted footways are Blaenau Gwent County Borough Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Blaenau Gwent County Borough Council) first — we flag this at survey.
Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal. Foundations are rarely the size anyone expects.
- Consider whether removal leaves an asset or route unprotected and record the decision in your risk assessment.
- Collect and dispose of hydraulic fluid and waste properly rather than leaving it in the ground.
What happens on site
Check consents and reasons
Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Finishes and options
| Option | Detail |
|---|---|
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
| Automatic bollard decommissioning | Electrical isolation, hydraulic drain-down, cassette removal and capping of ducts. |
| Relocation | Careful removal of reusable posts and reinstallation in new positions on the same site. |
What affects the quote
Our Wales guide prices are a starting point; the survey in Ebbw Vale firms them up. What tends to move them:
- Surface type and reinstatement
- Number and type of bollards
- Access, working hours and waste disposal
Keeping them working
Keep any keys, manuals and records from removed automatic bollards until the controller and cabling have also been dealt with, as they help an electrician confirm what was connected. Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled.
We can also service, repair or replace existing posts anywhere in Ebbw Vale.
Questions about bollard removal jobs in Ebbw Vale
Which parts of Ebbw Vale do you cover for bollard removal jobs?
We cover all of Ebbw Vale (NP23) and the rest of Blaenau Gwent. We also work in Tredegar, Abertillery and Bargoed.
Who gives permission for bollards on the pavement in Ebbw Vale?
Before digging near the kerb in Ebbw Vale we establish who owns the ground: adopted footways are Blaenau Gwent County Borough Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
What's a typical price for bollard removal jobs in Ebbw Vale?
In Ebbw Vale, typically £80–£335 per post removed with footing, surface made good, plus VAT (£95–£395 including VAT for homeowners), with a minimum job of £285 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Do we need permission to remove bollards?
Sometimes. Bollards required by a planning condition, lease, security plan or the highway authority should not be removed without checking. Historic bollards in conservation areas may also be protected.
Will the surface look patched after removal?
On block paving it can be nearly invisible, as the blocks are relaid. Tarmac, resin and concrete usually show a patch, especially on older weathered surfaces. Timing removal before resurfacing avoids that.
Bollard removal near Ebbw Vale
- Tredegar (1.7 mi)
- Abertillery (4.5 mi)
- Bargoed (6.6 mi)
- Merthyr Tydfil (7.5 mi)
- Blackwood (7.6 mi)
- Abergavenny (8.7 mi)