Conwy · Wales
Bollard removal in Colwyn Bay
Planning bollard removal jobs in Colwyn Bay? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageBollard removal in Colwyn Bay
Across Colwyn Bay, typical sites for bollard removal jobs include schools, community buildings and filling-station forecourts. Posts can be cut off at or below ground level or fully extracted with their concrete.
We cover Colwyn Bay's LL29 and LL28 postcode districts, including places such as Mynydd Marian, Llysfaen, Llansanffraid Glan Conwy and Eglwysbach. Nearby, we also work in Llandudno (4.8 miles), Abergele (6 miles), Rhyl (9.8 miles) and Prestatyn (13.5 miles), measured as the crow flies.
Key facts for this area
- Area
- Conwy, Wales
- Highway authority
- Conwy County Borough Council (local roads)
- Planning authority
- Conwy County Borough Council
- Postcodes
- LL29 and LL28
- Guide price
- Typically £80–£335 per post + VAT (£95–£395 inc VAT for homes); minimum job £285
- Survey
- Free, with a fixed written quote
Common reasons for bollard removal jobs in Colwyn Bay
Typical reasons for bollard removal jobs in Colwyn Bay:
- Access routes no longer needing control
- Clearing old bollards before resurfacing
- Decommissioning automatic bollards that are no longer used
Bollard removal prices in Colwyn Bay
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £225–£335 + VAT · £265–£395 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; -3% for Wales. Guide only — the fixed price follows a survey.
What we check first in Colwyn Bay
In Colwyn Bay the highway authority for local roads is Conwy County Borough Council. We confirm whether the ground is adopted highway before quoting, because bollards on a public footway need its agreement first.
If your site in Colwyn Bay is listed or inside a conservation area, check with the local planning authority (Conwy County Borough Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Backfilling in compacted layers stops later settlement, which otherwise shows as a dip in the new surface. Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal.
- In conservation areas, check before removing historic bollards, as consent may be needed or retention expected.
- Check whether the bollards were required by a planning condition, lease, security plan or the highway authority before removing them.
Installation, step by step
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Check consents and reasons
Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Finishes and options
| Option | Detail |
|---|---|
| Socket and cassette removal | Removable sockets and telescopic or semi-automatic cassettes extracted whole and the hole filled. |
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
| Lighting bollard removal | Supply made dead and cables terminated or removed by a qualified electrician before posts are lifted. |
What moves the price in Colwyn Bay
When we price bollard removal jobs in Colwyn Bay, these make the biggest difference:
- Number and type of bollards
- Access, working hours and waste disposal
- Cutting off or full foundation extraction
Keeping them working
Keep any keys, manuals and records from removed automatic bollards until the controller and cabling have also been dealt with, as they help an electrician confirm what was connected. If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete.
We can also service, repair or replace existing posts anywhere in Colwyn Bay.
Bollard removal in Colwyn Bay: FAQs
Which parts of Colwyn Bay do you cover for bollard removal jobs?
We cover all of Colwyn Bay (LL29 and LL28) and the rest of Conwy. We also work in Llandudno, Abergele and Rhyl.
Who gives permission for bollards on the pavement in Colwyn Bay?
Local roads and pavements in Colwyn Bay are the responsibility of Conwy County Borough Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
How much do bollard removal jobs cost in Colwyn Bay?
In Colwyn Bay, typically £80–£335 per post removed with footing, surface made good, plus VAT (£95–£395 including VAT for homeowners), with a minimum job of £285 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Should bollards be cut off or fully removed?
Cut off if the area is staying as it is and nothing will be built or dug there later. Fully remove if you are resurfacing, planting or installing something new, because buried concrete gets in the way. The quote can price both.
Will the surface look patched after removal?
On block paving it can be nearly invisible, as the blocks are relaid. Tarmac, resin and concrete usually show a patch, especially on older weathered surfaces. Timing removal before resurfacing avoids that.