Greater Manchester · England
Bollard removal in Tyldesley
Bollard removal jobs supplied and fitted in Tyldesley, Greater Manchester: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout bollard removal jobs in Tyldesley
Whether it's schools, high street shopfronts and community car parks, bollard removal jobs in Tyldesley are planned around who needs to get through and who doesn't. Automatic and lighting bollards also need their electrical supply made safe by a qualified electrician.
We cover the M29 postcode district in Tyldesley. We also cover neighbouring Atherton (1.3 miles), Leigh (2.5 miles), Walkden (2.8 miles) and Westhoughton (3.4 miles) — distances are straight-line. Manchester is around 10 miles away.
Tyldesley at a glance
- Area
- Greater Manchester, England
- Highway authority
- Wigan Council (local roads)
- Planning authority
- Wigan Council
- Postcodes
- M29
- Guide price
- Typically £80–£335 per post + VAT (£95–£395 inc VAT for homes); minimum job £285
- Survey
- Free, with a fixed written quote
- Nearby
- Atherton (1.3 mi), Leigh (2.5 mi), Walkden (2.8 mi), Westhoughton (3.4 mi)
Common reasons for bollard removal jobs in Tyldesley
Why sites in Tyldesley book bollard removal jobs:
- Removing redundant lighting bollards
- Access routes no longer needing control
- Clearing old bollards before resurfacing
Bollard removal prices in Tyldesley
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £235–£335 + VAT · £275–£395 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; -2% for North West. Guide only — the fixed price follows a survey.
Consents, ground and services in Tyldesley
Wigan Council is the highway authority covering Tyldesley's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Tyldesley is listed or inside a conservation area, check with the local planning authority (Wigan Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Cables and pipes are often laid close to existing posts after they were installed, so breaking out is done carefully and services are traced first. Backfilling in compacted layers stops later settlement, which otherwise shows as a dip in the new surface.
- Consider whether removal leaves an asset or route unprotected and record the decision in your risk assessment.
- Have automatic and lighting bollard supplies isolated and made safe by a qualified electrician.
How the job runs
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Choosing the right spec
| Option | Detail |
|---|---|
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
| Automatic bollard decommissioning | Electrical isolation, hydraulic drain-down, cassette removal and capping of ducts. |
| Lighting bollard removal | Supply made dead and cables terminated or removed by a qualified electrician before posts are lifted. |
Pricing bollard removal jobs in Tyldesley
Two Tyldesley jobs with the same number of posts can price quite differently. The usual reasons:
- Number and type of bollards
- Size of foundations and amount of spoil
- Access, working hours and waste disposal
Looking after them
If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete. Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled.
If posts in Tyldesley are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about bollard removal jobs in Tyldesley
Which parts of Tyldesley do you cover for bollard removal jobs?
We cover all of Tyldesley (M29) and the rest of Greater Manchester. We also work in Atherton, Leigh and Walkden.
Who gives permission for bollards on the pavement in Tyldesley?
The highway authority for local roads in Tyldesley is Wigan Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for bollard removal jobs in Tyldesley?
In Tyldesley, typically £80–£335 per post removed with footing, surface made good, plus VAT (£95–£395 including VAT for homeowners), with a minimum job of £285 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
Should bollards be cut off or fully removed?
Cut off if the area is staying as it is and nothing will be built or dug there later. Fully remove if you are resurfacing, planting or installing something new, because buried concrete gets in the way. The quote can price both.
Will the surface look patched after removal?
On block paving it can be nearly invisible, as the blocks are relaid. Tarmac, resin and concrete usually show a patch, especially on older weathered surfaces. Timing removal before resurfacing avoids that.
Bollard removal near Tyldesley
- Atherton (1.3 mi)
- Leigh (2.5 mi)
- Walkden (2.8 mi)
- Westhoughton (3.4 mi)
- Farnworth (3.7 mi)
- Hindley (4.9 mi)