Hampshire · England
Bollard removal in Basingstoke
Bollard removal jobs for sites across Basingstoke and the rest of Hampshire, from the first measurement to the last relaid paving block.
Computer-generated imageBasingstoke bollard removal jobs
Across Basingstoke, typical sites for bollard removal jobs include high streets, industrial estates and supermarket frontages. Posts can be cut off at or below ground level or fully extracted with their concrete.
Coverage in Basingstoke takes in the RG21, RG24, RG22, RG23, RG25 and RG26 postcode districts and nearby places like Old Basing, Sherborne St John, North Waltham and Cliddesden. Jobs in Basingstoke can be combined with work in Fleet (11.1 miles), Thatcham (12.3 miles), Yateley (12.4 miles) and Farnham (12.8 miles) (straight-line distances). It sits roughly 14 miles from Reading as the crow flies.
Key facts for this area
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for Basingstoke and Deane
- Postcodes
- RG21, RG24, RG22, RG23, RG25 and RG26
- Guide price
- Typically £85–£365 per post + VAT (£95–£435 inc VAT for homes); minimum job £305
- Survey
- Free, with a fixed written quote
Typical bollard removal jobs requests in Basingstoke
Typical reasons for bollard removal jobs in Basingstoke:
- Decommissioning automatic bollards that are no longer used
- Moving bollards to new positions on the same site
- Clearing old bollards before resurfacing
Guide prices for Basingstoke
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £85–£205 + VAT · £95–£245 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £165–£285 + VAT · £195–£335 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £255–£365 + VAT · £305–£435 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; +6% for South East. Guide only — the fixed price follows a survey.
Before we dig in Basingstoke
Hampshire County Council is the highway authority covering Basingstoke's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Basingstoke is listed or inside a conservation area, check with the local planning authority (the council for Basingstoke and Deane) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Backfilling in compacted layers stops later settlement, which otherwise shows as a dip in the new surface. Foundations are rarely the size anyone expects.
- Check whether the bollards were required by a planning condition, lease, security plan or the highway authority before removing them.
- Have automatic and lighting bollard supplies isolated and made safe by a qualified electrician.
From survey to handover
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Check consents and reasons
Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Options to consider
| Option | Detail |
|---|---|
| Relocation | Careful removal of reusable posts and reinstallation in new positions on the same site. |
| Lighting bollard removal | Supply made dead and cables terminated or removed by a qualified electrician before posts are lifted. |
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
What affects the quote
When we price bollard removal jobs in Basingstoke, these make the biggest difference:
- Access, working hours and waste disposal
- Cutting off or full foundation extraction
- Surface type and reinstatement
After installation
Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled. If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete.
For damaged or loose posts in Basingstoke, repairs and replacements are priced in writing first.
Common questions
Can you carry out bollard removal jobs anywhere in Basingstoke?
We cover all of Basingstoke (RG21, RG24, RG22, RG23, RG25 and RG26) and the rest of Hampshire. We also work in Fleet, Thatcham and Yateley.
Do I need consent for bollards on a public footway in Basingstoke?
The highway authority for local roads in Basingstoke is Hampshire County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do bollard removal jobs cost in Basingstoke?
In Basingstoke, typically £85–£365 per post removed with footing, surface made good, plus VAT (£95–£435 including VAT for homeowners), with a minimum job of £305 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can automatic bollards be removed safely?
Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.
Do we need permission to remove bollards?
Sometimes. Bollards required by a planning condition, lease, security plan or the highway authority should not be removed without checking. Historic bollards in conservation areas may also be protected.
Bollard removal near Basingstoke
- Fleet (11.1 mi)
- Thatcham (12.3 mi)
- Yateley (12.4 mi)
- Farnham (12.8 mi)
- Aldershot (14 mi)
- Newbury (14.1 mi)