Hampshire · England
Bollard removal in Winchester
Planning bollard removal jobs in Winchester? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageBollard removal in Winchester
Bollard removal jobs suit plenty of Winchester sites, local parades, residential driveways and schools among them. Automatic and lighting bollards also need their electrical supply made safe by a qualified electrician.
We cover Winchester's SO23, SO21 and SO22 postcode districts, including places such as Springvale, Headbourne Worthy, Kings Worthy and Colden Common. Nearby, we also work in Eastleigh (6.9 miles), Southampton (11.7 miles), Andover (12.6 miles) and Totton (12.6 miles), measured as the crow flies. It sits roughly 12 miles from Southampton as the crow flies.
Key facts for this area
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for Winchester
- Postcodes
- SO23, SO21 and SO22
- Guide price
- Typically £85–£365 per post + VAT (£95–£435 inc VAT for homes); minimum job £305
- Survey
- Free, with a fixed written quote
- Nearby
- Eastleigh (6.9 mi), Southampton (11.7 mi), Andover (12.6 mi), Totton (12.6 mi)
Guide prices for Winchester
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £85–£205 + VAT · £95–£245 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £165–£285 + VAT · £195–£335 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £255–£365 + VAT · £305–£435 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; +6% for South East. Guide only — the fixed price follows a survey.
Why Winchester sites book bollard removal jobs
Typical reasons for bollard removal jobs in Winchester:
- Removing redundant lighting bollards
- Car park and forecourt redesigns
- Decommissioning automatic bollards that are no longer used
Permissions and groundwork in Winchester
Hampshire County Council is the highway authority covering Winchester's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Winchester) first — we flag this at survey.
Foundations are rarely the size anyone expects. Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal.
- Have automatic and lighting bollard supplies isolated and made safe by a qualified electrician.
- In conservation areas, check before removing historic bollards, as consent may be needed or retention expected.
What happens on site
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Options to consider
| Option | Detail |
|---|---|
| Relocation | Careful removal of reusable posts and reinstallation in new positions on the same site. |
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
| Lighting bollard removal | Supply made dead and cables terminated or removed by a qualified electrician before posts are lifted. |
What moves the price in Winchester
When we price bollard removal jobs in Winchester, these make the biggest difference:
- Electrical isolation and hydraulic drain-down
- Cutting off or full foundation extraction
- Access, working hours and waste disposal
Looking after them
Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled. Keep any keys, manuals and records from removed automatic bollards until the controller and cabling have also been dealt with, as they help an electrician confirm what was connected.
If posts in Winchester are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about bollard removal jobs in Winchester
Which parts of Winchester do you cover for bollard removal jobs?
We cover all of Winchester (SO23, SO21 and SO22) and the rest of Hampshire. We also work in Eastleigh, Southampton and Andover.
Who gives permission for bollards on the pavement in Winchester?
The highway authority for local roads in Winchester is Hampshire County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for bollard removal jobs in Winchester?
In Winchester, typically £85–£365 per post removed with footing, surface made good, plus VAT (£95–£435 including VAT for homeowners), with a minimum job of £305 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What happens to the waste?
Steel and iron are recycled where possible, concrete and spoil are taken away, and hydraulic fluid is disposed of properly. You are left with a clean, reinstated area.
Do we need permission to remove bollards?
Sometimes. Bollards required by a planning condition, lease, security plan or the highway authority should not be removed without checking. Historic bollards in conservation areas may also be protected.
Bollard removal in nearby towns
- Eastleigh (6.9 mi)
- Southampton (11.7 mi)
- Andover (12.6 mi)
- Totton (12.6 mi)
- Hythe (14.6 mi)
- Fareham (16 mi)