Midlothian · Scotland
Bollard removal in Dalkeith
Local installation of bollard removal jobs in Dalkeith — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageDalkeith bollard removal jobs
Automatic and lighting bollards also need their electrical supply made safe by a qualified electrician. In Dalkeith, that tends to mean sites such as small industrial units, local parades and residential driveways.
We work across EH22 and EH37 — Dalkeith itself and places including Newtongrange, Danderhall, Easthouses and Millerhill. We also cover neighbouring Bonnyrigg (2 miles), Musselburgh (3.4 miles), Tranent (5.7 miles) and Edinburgh (6.4 miles) — distances are straight-line. Dalkeith is about 6 miles from Edinburgh.
Dalkeith at a glance
- Area
- Midlothian, Scotland
- Roads authority
- Midlothian Council (local roads)
- Planning authority
- Midlothian Council
- Postcodes
- EH22 and EH37
- Guide price
- Typically £80–£345 per post + VAT (£95–£405 inc VAT for homes); minimum job £295
- Survey
- Free, with a fixed written quote
- Nearby
- Bonnyrigg (2 mi), Musselburgh (3.4 mi), Tranent (5.7 mi), Edinburgh (6.4 mi)
What bollard removal jobs cost in Dalkeith
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £235–£345 + VAT · £275–£405 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; no regional adjustment. Guide only — the fixed price follows a survey.
Why Dalkeith sites book bollard removal jobs
Typical reasons for bollard removal jobs in Dalkeith:
- Removing redundant lighting bollards
- Car park and forecourt redesigns
- Taking out broken stubs and empty sockets
Before we dig in Dalkeith
In Scotland the council is the roads authority for local roads, which in Dalkeith means Midlothian Council. Bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Midlothian Council can confirm before anything is ordered.
Foundations are rarely the size anyone expects. Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal.
- Have automatic and lighting bollard supplies isolated and made safe by a qualified electrician.
- Collect and dispose of hydraulic fluid and waste properly rather than leaving it in the ground.
From survey to handover
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Finishes and options
| Option | Detail |
|---|---|
| Automatic bollard decommissioning | Electrical isolation, hydraulic drain-down, cassette removal and capping of ducts. |
| Lighting bollard removal | Supply made dead and cables terminated or removed by a qualified electrician before posts are lifted. |
| Cut off below surface | Post removed at or below finished level, foundation left in place and the surface patched. Quick and low-disruption. |
What affects the quote
Two Dalkeith jobs with the same number of posts can price quite differently. The usual reasons:
- Size of foundations and amount of spoil
- Surface type and reinstatement
- Cutting off or full foundation extraction
After installation
If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete. Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled.
We can also service, repair or replace existing posts anywhere in Dalkeith.
Bollard removal in Dalkeith: FAQs
Do you carry out bollard removal jobs in Dalkeith?
We cover all of Dalkeith (EH22 and EH37) and the rest of Midlothian. We also work in Bonnyrigg, Musselburgh and Tranent.
Who gives permission for bollards on the pavement in Dalkeith?
Dalkeith falls under Midlothian Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
What's a typical price for bollard removal jobs in Dalkeith?
In Dalkeith, typically £80–£345 per post removed with footing, surface made good, plus VAT (£95–£405 including VAT for homeowners), with a minimum job of £295 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
What happens to the waste?
Steel and iron are recycled where possible, concrete and spoil are taken away, and hydraulic fluid is disposed of properly. You are left with a clean, reinstated area.
Do we need permission to remove bollards?
Sometimes. Bollards required by a planning condition, lease, security plan or the roads authority should not be removed without checking. Historic bollards in conservation areas may also be protected.
Bollard removal near Dalkeith
- Bonnyrigg (2 mi)
- Musselburgh (3.4 mi)
- Tranent (5.7 mi)
- Edinburgh (6.4 mi)
- Penicuik (7.5 mi)
- South Queensferry (14.5 mi)