Neath Port Talbot · Wales
Bollard removal in Ystalyfera
Bollard removal jobs for sites across Ystalyfera and the rest of Neath Port Talbot, from the first measurement to the last relaid paving block.
Computer-generated imageYstalyfera bollard removal jobs
Bollard removal jobs suit plenty of Ystalyfera sites, community car parks, high street shopfronts and schools among them. Posts can be cut off at or below ground level or fully extracted with their concrete.
We work across SA9 and SA8 — Ystalyfera itself and places including Cwmllynfell, Cwm-twrch Isaf, Cefn-bryn-brain and Cwm-twrch Uchaf. Jobs in Ystalyfera can be combined with work in Neath (7.3 miles), Clydach (7.7 miles), Ammanford (9 miles) and Maesteg (12.1 miles) (straight-line distances). It sits roughly 12 miles from Swansea as the crow flies.
Ystalyfera at a glance
- Area
- Neath Port Talbot, Wales
- Highway authority
- Neath Port Talbot Council (local roads)
- Planning authority
- Neath Port Talbot Council
- Postcodes
- SA9 and SA8
- Guide price
- Typically £80–£335 per post + VAT (£95–£395 inc VAT for homes); minimum job £285
- Survey
- Free, with a fixed written quote
Bollard removal prices in Ystalyfera
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £225–£335 + VAT · £265–£395 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; -3% for Wales. Guide only — the fixed price follows a survey.
Common reasons for bollard removal jobs in Ystalyfera
Why sites in Ystalyfera book bollard removal jobs:
- Access routes no longer needing control
- Clearing old bollards before resurfacing
- Decommissioning automatic bollards that are no longer used
What we check first in Ystalyfera
Local roads and pavements in Ystalyfera are the responsibility of Neath Port Talbot Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
If your site in Ystalyfera is listed or inside a conservation area, check with the local planning authority (Neath Port Talbot Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal. Foundations are rarely the size anyone expects.
- Check whether the bollards were required by a planning condition, lease, security plan or the highway authority before removing them.
- In conservation areas, check before removing historic bollards, as consent may be needed or retention expected.
What happens on site
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Specification choices
| Option | Detail |
|---|---|
| Cut off below surface | Post removed at or below finished level, foundation left in place and the surface patched. Quick and low-disruption. |
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
| Socket and cassette removal | Removable sockets and telescopic or semi-automatic cassettes extracted whole and the hole filled. |
What moves the price in Ystalyfera
Our Wales guide prices are a starting point; the survey in Ystalyfera firms them up. What tends to move them:
- Size of foundations and amount of spoil
- Access, working hours and waste disposal
- Surface type and reinstatement
Looking after them
After removal, keep an eye on reinstated areas for settlement over the following months, particularly where large foundations were broken out. Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled.
If posts in Ystalyfera are later hit or damaged, we can repair or replace them — see bollard repairs.
Bollard removal in Ystalyfera: FAQs
Which parts of Ystalyfera do you cover for bollard removal jobs?
We cover all of Ystalyfera (SA9 and SA8) and the rest of Neath Port Talbot. We also work in Neath, Clydach and Ammanford.
Do I need consent for bollards on a public footway in Ystalyfera?
Before digging near the kerb in Ystalyfera we establish who owns the ground: adopted footways are Neath Port Talbot Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
What's a typical price for bollard removal jobs in Ystalyfera?
In Ystalyfera, typically £80–£335 per post removed with footing, surface made good, plus VAT (£95–£395 including VAT for homeowners), with a minimum job of £285 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Do we need permission to remove bollards?
Sometimes. Bollards required by a planning condition, lease, security plan or the highway authority should not be removed without checking. Historic bollards in conservation areas may also be protected.
Should bollards be cut off or fully removed?
Cut off if the area is staying as it is and nothing will be built or dug there later. Fully remove if you are resurfacing, planting or installing something new, because buried concrete gets in the way. The quote can price both.
Bollard removal near Ystalyfera
- Neath (7.3 mi)
- Clydach (7.7 mi)
- Ammanford (9 mi)
- Maesteg (12.1 mi)
- Port Talbot (12.2 mi)
- Swansea (12.3 mi)