West Lothian · Scotland
Bollard removal in Livingston
Bollard removal jobs for sites across Livingston and the rest of West Lothian, from the first measurement to the last relaid paving block.
Computer-generated imageLivingston bollard removal jobs
In the town of Livingston, bollard removal jobs tend to go in at high street shopfronts, schools and community car parks. Automatic and lighting bollards also need their electrical supply made safe by a qualified electrician.
We work across EH54, EH53 and EH55 — Livingston itself and places including East Calder, Oakbank, Polbeth and West Calder. Nearby, we also work in Broxburn (2.9 miles), Bathgate (4.7 miles), Linlithgow (6 miles) and Whitburn (6.7 miles), measured as the crow flies. It sits roughly 13 miles from Edinburgh as the crow flies.
Key facts for this area
- Area
- West Lothian, Scotland
- Roads authority
- West Lothian Council (local roads)
- Planning authority
- West Lothian Council
- Postcodes
- EH54, EH53 and EH55
- Guide price
- Typically £80–£345 per post + VAT (£95–£405 inc VAT for homes); minimum job £295
- Survey
- Free, with a fixed written quote
- Nearby
- Broxburn (2.9 mi), Bathgate (4.7 mi), Linlithgow (6 mi), Whitburn (6.7 mi)
Common reasons for bollard removal jobs in Livingston
Typical reasons for bollard removal jobs in Livingston:
- Moving bollards to new positions on the same site
- Removing redundant lighting bollards
- Car park and forecourt redesigns
What bollard removal jobs cost in Livingston
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £235–£345 + VAT · £275–£405 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Livingston
For anything on the public footway in Livingston we check with the roads authority first — West Lothian Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
Many private-land installations in Livingston need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at West Lothian Council before posts go in.
Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal. Where the area is being resurfaced anyway, removal is timed to happen first so the patching disappears under the new surface.
- In conservation areas, check before removing historic bollards, as consent may be needed or retention expected.
- Have automatic and lighting bollard supplies isolated and made safe by a qualified electrician.
How the job runs
Check consents and reasons
Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Choosing the right spec
| Option | Detail |
|---|---|
| Cut off below surface | Post removed at or below finished level, foundation left in place and the surface patched. Quick and low-disruption. |
| Automatic bollard decommissioning | Electrical isolation, hydraulic drain-down, cassette removal and capping of ducts. |
| Relocation | Careful removal of reusable posts and reinstallation in new positions on the same site. |
Pricing bollard removal jobs in Livingston
Our Scotland guide prices are a starting point; the survey in Livingston firms them up. What tends to move them:
- Number and type of bollards
- Cutting off or full foundation extraction
- Surface type and reinstatement
After installation
Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled. If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete.
We can also service, repair or replace existing posts anywhere in Livingston.
Bollard removal in Livingston: FAQs
Do you carry out bollard removal jobs in Livingston?
We cover all of Livingston (EH54, EH53 and EH55) and the rest of West Lothian. We also work in Broxburn, Bathgate and Linlithgow.
Do I need consent for bollards on a public footway in Livingston?
Livingston falls under West Lothian Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
How much do bollard removal jobs cost in Livingston?
In Livingston, typically £80–£345 per post removed with footing, surface made good, plus VAT (£95–£405 including VAT for homeowners), with a minimum job of £295 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can automatic bollards be removed safely?
Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.
Do we need permission to remove bollards?
Sometimes. Bollards required by a planning condition, lease, security plan or the roads authority should not be removed without checking. Historic bollards in conservation areas may also be protected.
Bollard removal in nearby towns
- Broxburn (2.9 mi)
- Bathgate (4.7 mi)
- Linlithgow (6 mi)
- Whitburn (6.7 mi)
- Armadale (7 mi)
- South Queensferry (7.7 mi)