West Yorkshire · England
Bollard removal in Ossett
Bollard removal jobs supplied and fitted in Ossett, West Yorkshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageOssett bollard removal jobs
Removal of fixed, removable, telescopic and automatic bollards, including foundations, with the surface made good to match. In Ossett, that tends to mean sites such as local parades, high street shopfronts and small industrial units.
We cover every part of Ossett in the WF5 postcode district. We also cover neighbouring Dewsbury (2.1 miles), Batley (2.7 miles), Wakefield (3.4 miles) and Morley (4.2 miles) — distances are straight-line. Ossett is about 8 miles from Leeds.
Key facts for this area
- Area
- West Yorkshire, England
- Highway authority
- Wakefield Council (local roads)
- Planning authority
- Wakefield Council
- Postcodes
- WF5
- Guide price
- Typically £80–£335 per post + VAT (£95–£395 inc VAT for homes); minimum job £285
- Survey
- Free, with a fixed written quote
What bollard removal jobs cost in Ossett
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £225–£335 + VAT · £265–£395 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; -3% for Yorkshire and the Humber. Guide only — the fixed price follows a survey.
Typical bollard removal jobs requests in Ossett
Typical reasons for bollard removal jobs in Ossett:
- Clearing old bollards before resurfacing
- Taking out broken stubs and empty sockets
- Moving bollards to new positions on the same site
Before we dig in Ossett
The highway authority for local roads in Ossett is Wakefield Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Wakefield Council) first — we flag this at survey.
Foundations are rarely the size anyone expects. Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal.
- Collect and dispose of hydraulic fluid and waste properly rather than leaving it in the ground.
- Check whether the bollards were required by a planning condition, lease, security plan or the highway authority before removing them.
Installation, step by step
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Check consents and reasons
Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Finishes and options
| Option | Detail |
|---|---|
| Relocation | Careful removal of reusable posts and reinstallation in new positions on the same site. |
| Cut off below surface | Post removed at or below finished level, foundation left in place and the surface patched. Quick and low-disruption. |
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
What moves the price in Ossett
Our Yorkshire and the Humber guide prices are a starting point; the survey in Ossett firms them up. What tends to move them:
- Size of foundations and amount of spoil
- Electrical isolation and hydraulic drain-down
- Number and type of bollards
After installation
Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled. If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete.
We can also service, repair or replace existing posts anywhere in Ossett.
Common questions
Can you carry out bollard removal jobs anywhere in Ossett?
We cover all of Ossett (WF5) and the rest of West Yorkshire. We also work in Dewsbury, Batley and Wakefield.
Do I need consent for bollards on a public footway in Ossett?
The highway authority for local roads in Ossett is Wakefield Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for bollard removal jobs in Ossett?
In Ossett, typically £80–£335 per post removed with footing, surface made good, plus VAT (£95–£395 including VAT for homeowners), with a minimum job of £285 plus VAT, using our Yorkshire and the Humber guide prices. The fixed figure comes in writing after we've seen the site.
Can removed bollards be reused elsewhere on site?
Often, if they come out undamaged. Steel posts and removable bollards relocate well. New foundations are formed at the new positions.
Can automatic bollards be removed safely?
Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.
Bollard removal in nearby towns
- Dewsbury (2.1 mi)
- Batley (2.7 mi)
- Wakefield (3.4 mi)
- Morley (4.2 mi)
- Cleckheaton (6.2 mi)
- Darton (6.8 mi)