Lincolnshire · England
Bollard replacement in Lincoln
Replacement bollards for sites across Lincoln and the rest of Lincolnshire, from the first measurement to the last relaid paving block.
Computer-generated imageBollard replacement in Lincoln
Replacement is the right answer when a post is too damaged to repair or no longer suits how the site is used. In Lincoln, that tends to mean sites such as supermarket frontages, retail parks and leisure centres.
We cover the LN2, LN6, LN1 and LN5 postcode districts in Lincoln. Nearby, we also work in Gainsborough (14.4 miles), Newark-on-Trent (16 miles) and Retford (18 miles), measured as the crow flies. It sits roughly 32 miles from Nottingham as the crow flies.
Lincoln at a glance
- Area
- Lincolnshire, England
- Highway authority
- Lincolnshire County Council (local roads)
- Planning authority
- Lincolnshire County Council
- Postcodes
- LN2, LN6, LN1 and LN5
- Guide price
- Typically £215–£1,195 per post + VAT (£255–£1,445 inc VAT for homes); minimum job £435
- Survey
- Free, with a fixed written quote
- Nearby
- Gainsborough (14.4 mi), Newark-on-Trent (16 mi), Retford (18 mi)
Common reasons for replacement bollards in Lincoln
What replacement bollards usually sort out in Lincoln:
- Cracked cast iron or chipped concrete bollards
- Crushed sockets and failed telescopic cassettes
- Posts bent, sheared or broken by vehicle impacts
Replacement bollard prices in Lincoln
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £215–£615 + VAT · £255–£735 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £495–£905 + VAT · £585–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £785–£1,195 + VAT · £935–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post replaced, old post and footing removed; -2% for East Midlands. Guide only — the fixed price follows a survey.
Consents, ground and services in Lincoln
The highway authority for local roads in Lincoln is Lincolnshire County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Lincoln is listed or inside a conservation area, check with the local planning authority (Lincolnshire County Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Breaking out is done carefully near services, particularly where cables have been laid close to posts since the original installation. If the old foundation is cracked from the impact, it is removed entirely; if it is sound and suits the new post, reuse can reduce disruption.
- Upgrades to rated products must use the manufacturer's tested foundation, specified with your security adviser.
- On public highway, the highway authority may need to approve the replacement or carry out the work itself.
Installation, step by step
Survey and match
At the free site survey we measure the existing bollards, photograph the line and check the foundations. A fixed written quote sets out like-for-like and any upgrade options.
Remove the old bollard
The damaged post is cut or extracted and the old foundation broken out, checking for services as the hole is opened.
Hand over records
Photographs and an itemised invoice are provided, which is useful when recovering the cost from a driver's insurer.
Choosing the right spec
| Option | Detail |
|---|---|
| Heavier section | Larger diameter, thicker wall or concrete-filled steel where posts keep getting bent. |
| Like-for-like | Same diameter, height, finish and fixing, so the line looks unchanged. |
| Making safe | Removing or capping a dangerous broken stub before the replacement is fitted. |
What affects the quote
When we price replacement bollards in Lincoln, these make the biggest difference:
- Making safe before the replacement
- Matching special finishes, castings or discontinued products
- Surface type and reinstatement
Keeping them working
Keep a record of the new product, finish and supplier so future replacements match. A single impact on a rarely struck post is bad luck; repeated strikes in the same spot point to a layout problem, such as a tight turn or a missing wheel stop, that a stronger bollard alone will not solve.
We can also service, repair or replace existing posts anywhere in Lincoln.
Common questions
Which parts of Lincoln do you cover for replacement bollards?
We cover all of Lincoln (LN2, LN6, LN1 and LN5) and the rest of Lincolnshire. We also work in Gainsborough, Newark-on-Trent and Retford.
Who gives permission for bollards on the pavement in Lincoln?
Lincolnshire County Council is the highway authority covering Lincoln's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do replacement bollards cost in Lincoln?
In Lincoln, typically £215–£1,195 per post replaced, old post and footing removed, plus VAT (£255–£1,445 including VAT for homeowners), with a minimum job of £435 plus VAT, using our East Midlands guide prices. The fixed figure comes in writing after we've seen the site.
A driver hit our bollard and left: what should we do?
Make the area safe, photograph the damage and report it if the post is on public land. Check whether CCTV covered the area. A written quote from us can then support any claim.
Should we replace like-for-like or upgrade?
Like-for-like if the post was hit once in an unusual incident. Consider an upgrade if the same position is struck repeatedly or the post no longer suits how the site is used. The survey will show which makes sense.