Powys · Wales
Bollard replacement in Brecon
Planning replacement bollards in Brecon? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout replacement bollards in Brecon
We supply and fit replacement bollards throughout Brecon, typically for sites such as small industrial units, community car parks and residential driveways. Like-for-like or upgraded replacement of bollards damaged by vehicles, corrosion or wear, matched to the existing line.
Coverage in Brecon takes in the LD3 postcode district and nearby places like Talgarth, Bronllys, Bwlch and Llanfrynach. Nearby, we also work in Tredegar (13.4 miles), Merthyr Tydfil (13.7 miles), Ebbw Vale (14 miles) and Aberdare (16.2 miles), measured as the crow flies. It sits roughly 33 miles from Swansea as the crow flies.
Brecon at a glance
- Area
- Powys, Wales
- Highway authority
- Powys County Council (local roads)
- Planning authority
- Powys County Council
- Postcodes
- LD3
- Guide price
- Typically £205–£1,145 per post + VAT (£245–£1,345 inc VAT for homes); minimum job £425
- Survey
- Free, with a fixed written quote
- Nearby
- Tredegar (13.4 mi), Merthyr Tydfil (13.7 mi), Ebbw Vale (14 mi), Aberdare (16.2 mi)
Guide prices for Brecon
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £205–£605 + VAT · £245–£725 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £495–£895 + VAT · £585–£1,045 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £775–£1,145 + VAT · £925–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post replaced, old post and footing removed; -3% for Wales. Guide only — the fixed price follows a survey.
Common reasons for replacement bollards in Brecon
What replacement bollards usually sort out in Brecon:
- Replacing mixed, mismatched posts with a consistent line
- Single missing posts in an otherwise sound line
- Upgrading posts that keep being hit
Consents, ground and services in Brecon
Before digging near the kerb in Brecon we establish who owns the ground: adopted footways are Powys County Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Powys County Council) first — we flag this at survey.
If the old foundation is cracked from the impact, it is removed entirely; if it is sound and suits the new post, reuse can reduce disruption. Breaking out is done carefully near services, particularly where cables have been laid close to posts since the original installation.
- On public highway, the highway authority may need to approve the replacement or carry out the work itself.
- Where bollards were required by a planning condition, a security plan or a lease, check that any change of type still meets that requirement.
What happens on site
Make safe
If a broken post or stub is a hazard, it can be removed or capped first. That is priced separately in writing so you can approve it on its own.
Order the replacement
Matching posts, sockets or castings are ordered, and you see details of any close equivalent before it is confirmed.
Install the new post
The new bollard is set in a fresh foundation, aligned with its neighbours and the surface is reinstated to match.
Finishes and options
| Option | Detail |
|---|---|
| Like-for-like | Same diameter, height, finish and fixing, so the line looks unchanged. |
| Matched finishes | RAL powder coat, stainless grade and finish, or heritage paint schemes matched to the existing line. |
| Change of type | Swapping fixed posts for removable, telescopic, flexible or polymer bollards to suit how the site is used. |
What affects the quote
Our Wales guide prices are a starting point; the survey in Brecon firms them up. What tends to move them:
- Making safe before the replacement
- Upgrades that need larger foundations
- Surface type and reinstatement
After installation
Treat new posts as part of your routine inspections: check for lean, chips and faded bands. Keep a record of the new product, finish and supplier so future replacements match.
We can also service, repair or replace existing posts anywhere in Brecon.
Bollard replacement in Brecon: FAQs
Do you carry out replacement bollards in Brecon?
We cover all of Brecon (LD3) and the rest of Powys. We also work in Tredegar, Merthyr Tydfil and Ebbw Vale.
Who gives permission for bollards on the pavement in Brecon?
Before digging near the kerb in Brecon we establish who owns the ground: adopted footways are Powys County Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
How much do replacement bollards cost in Brecon?
In Brecon, typically £205–£1,145 per post replaced, old post and footing removed, plus VAT (£245–£1,345 including VAT for homeowners), with a minimum job of £425 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Should we replace like-for-like or upgrade?
Like-for-like if the post was hit once in an unusual incident. Consider an upgrade if the same position is struck repeatedly or the post no longer suits how the site is used. The survey will show which makes sense.
A driver hit our bollard and left: what should we do?
Make the area safe, photograph the damage and report it if the post is on public land. Check whether CCTV covered the area. A written quote from us can then support any claim.
Bollard replacement near Brecon
- Tredegar (13.4 mi)
- Merthyr Tydfil (13.7 mi)
- Ebbw Vale (14 mi)
- Aberdare (16.2 mi)
- Abergavenny (18 mi)
- Mountain Ash (18.1 mi)