North Ayrshire · Scotland
Cast iron and heritage bollards in Kilwinning
Local installation of cast iron bollards in Kilwinning — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout cast iron bollards in Kilwinning
Across Kilwinning, typical sites for cast iron bollards include schools, local parades and community car parks. Traditional grey cast iron is hard but brittle, while modern ductile iron castings are tougher and bend before they break.
We work across KA13 and KA24 — Kilwinning itself and places including Benslie and Dalry. We also cover neighbouring Irvine (3.1 miles), Saltcoats (3.3 miles), Ardrossan (3.9 miles) and Troon (7.8 miles) — distances are straight-line. Glasgow is around 23 miles away.
Kilwinning at a glance
- Area
- North Ayrshire, Scotland
- Roads authority
- North Ayrshire Council (local roads)
- Planning authority
- North Ayrshire Council
- Postcodes
- KA13 and KA24
- Guide price
- Typically £445–£1,695 per bollard + VAT (£525–£2,045 inc VAT for homes); minimum job £745
- Survey
- Free, with a fixed written quote
Where cast iron bollards go in around Kilwinning
Around Kilwinning, cast iron bollards usually solve one of these:
- Resetting original bollards that have tilted or worked loose
- Replacing lost or broken posts in an existing heritage line
- Conservation areas and historic town centres
Guide prices for Kilwinning
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £445–£975 + VAT · £525–£1,145 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £825–£1,345 + VAT · £985–£1,595 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,195–£1,695 + VAT · £1,445–£2,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Consents, ground and services in Kilwinning
In Scotland the council is the roads authority for local roads, which in Kilwinning means North Ayrshire Council. Cast iron bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
If your site in Kilwinning is listed or inside a conservation area, check with the local planning authority (North Ayrshire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Historic streets were built in layers: modern services sit over older drains, coal holes and sometimes vaults, and the paving may be natural stone on a lime or sand bed rather than concrete. Original stone flags and setts are reused wherever possible, because new stone rarely matches weathered material.
- On public highway, agree positions and specification with the roads authority.
- Avoid chains between posts on pedestrian routes, which can trip blind and partially sighted people.
From survey to handover
Lift paving carefully
Natural stone flags, setts and kerbs are lifted by hand, numbered where needed and stored for relaying.
Set the post
Each bollard is set plumb in concrete with its root, flange or core, at a height that matches its neighbours. Original posts being reset are cleaned and checked for cracks first.
Relay and finish
Stone is relaid in its original pattern with suitable mortar, and the bollard is painted or touched up after fixing.
Choosing the right spec
| Option | Detail |
|---|---|
| Cast aluminium | Lighter and easier to handle, with traditional patterns, but less robust and not always accepted in sensitive settings. |
| Steel cores and covers | Cast covers over root-fixed steel or crash-tested cores for strength without changing the look. |
| Ductile iron | Same patterns with much greater toughness; bends before it breaks. The usual choice for new posts on trafficked streets. |
Pricing cast iron bollards in Kilwinning
When we price cast iron bollards in Kilwinning, these make the biggest difference:
- Pattern complexity and whether a special casting is needed
- Resetting or repairing original bollards
- Painting, highlights and crest details
After installation
Keep a record of patterns and suppliers so that future replacements match; some patterns are made in small runs and can take time to source. Cast iron lasts well if its paint is kept intact.
If posts in Kilwinning are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about cast iron bollards in Kilwinning
Which parts of Kilwinning do you cover for cast iron bollards?
We cover all of Kilwinning (KA13 and KA24) and the rest of North Ayrshire. We also work in Irvine, Saltcoats and Ardrossan.
Who gives permission for bollards on the pavement in Kilwinning?
In Scotland the council is the roads authority for local roads, which in Kilwinning means North Ayrshire Council. Cast iron bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
What's a typical price for cast iron bollards in Kilwinning?
In Kilwinning, typically £445–£1,695 per bollard, supplied and installed, plus VAT (£525–£2,045 including VAT for homeowners), with a minimum job of £745 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
What colour should cast iron bollards be painted?
Black is the traditional choice in many places, sometimes with gold or white highlights on bands or crests. Some areas have their own historic colours. The conservation officer can confirm what suits the street.
Can an old cast iron bollard be repaired?
Usually, if it is tilted, loose or has damaged paint: it can be lifted, cleaned, reset on a new foundation and repainted. Cracked grey iron is harder to repair and may need specialist work or a matching replacement.