Aberdeenshire · Scotland
Concrete bollard installation in Peterhead
Concrete bollards supplied and fitted in Peterhead, Aberdeenshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imagePeterhead concrete bollards
We supply and fit concrete bollards throughout Peterhead, typically for sites such as filling-station forecourts, small industrial units and community buildings. Finishes range from plain grey concrete to exposed aggregate and stone-effect surfaces that suit civic and landscaped settings.
Coverage in Peterhead takes in the AB42 postcode district and nearby places like Mintlaw, Cruden Bay, Longside and St Fergus. We also cover neighbouring Ellon (14.5 miles) and Fraserburgh (15.3 miles) — distances are straight-line.
Local details
- Area
- Aberdeenshire, Scotland
- Roads authority
- Aberdeenshire Council (local roads)
- Planning authority
- Aberdeenshire Council
- Postcodes
- AB42
- Guide price
- Typically £175–£595 per bollard + VAT; minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Ellon (14.5 mi), Fraserburgh (15.3 mi)
Concrete bollards in Peterhead: common uses
Typical reasons Peterhead sites choose concrete bollards:
- Park entrances and greens where vehicles should not drive
- Housing estates and communal areas
- Edges of open land and verges subject to unauthorised vehicle access
Guide prices for Peterhead
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £175–£355 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £305–£475 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £425–£595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Consents, ground and services in Peterhead
Peterhead falls under Aberdeenshire Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
If your site in Peterhead is listed or inside a conservation area, check with the local planning authority (Aberdeenshire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Each post sits on a concrete base on firm ground, and on soft verges or made ground the base is deepened or widened to suit. Park and verge locations often have tree roots nearby, which need protecting and can push bollards over time if set too close.
- Use contrasting colours or bands so grey bollards stand out against grey paving.
- On public highway or council land, agree positions and specification with the roads authority or landowner.
How the job runs
Plan lifting
Each bollard's weight is checked, and a lifting method is chosen, such as a vacuum lifter or crane arm, with an exclusion zone set during lifts.
Reinstate and clean
Paving is made good around each base and the bollards are cleaned of mortar and handling marks.
Protect while the grout cures
Bollards are left undisturbed until the grout and foundation have gained strength, with temporary barriers if vehicles use the area. Lines that need to open to traffic quickly can use faster-setting grouts where the product allows.
Options to consider
| Option | Detail |
|---|---|
| Reconstituted stone | Crushed natural stone in a concrete mix, giving a Portland, buff or granite-like appearance for civic and heritage settings. |
| Surface finishes | Smooth, exposed aggregate, acid-etched or shot-blasted, chosen to suit paving and resist visible weathering. |
| Planters and blocks | Concrete planters and seating blocks used in place of bollards where a softer look is wanted. |
What affects the quote
Two Peterhead jobs with the same number of posts can price quite differently. The usual reasons:
- Size, shape and surface finish
- Precast concrete or reconstituted stone
- Foundation depth and ground conditions
Looking after them
Small chips can be repaired with a colour-matched mortar, but a bollard that has cracked through or sheared at the dowel needs replacing. Concrete bollards need very little: occasional washing, removal of graffiti with suitable cleaners, and checks for chips, cracks and lean.
If posts in Peterhead are later hit or damaged, we can repair or replace them — see bollard repairs.
Concrete bollards in Peterhead: FAQs
Do you install concrete bollards in Peterhead?
We cover all of Peterhead (AB42) and the rest of Aberdeenshire. We also work in Ellon and Fraserburgh.
Do I need consent for concrete bollards on a public footway in Peterhead?
Peterhead falls under Aberdeenshire Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
What's a typical price for concrete bollards in Peterhead?
In Peterhead, typically £175–£595 per bollard, supplied and installed, plus VAT, with a minimum job of £595 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can a chipped concrete bollard be repaired?
Small chips and edge damage can be filled with colour-matched mortar. A bollard cracked through or broken at its base needs replacing. Matching finishes is easier if the original product is still made.
Can concrete bollards be moved later?
Yes, though it takes lifting equipment. Dowel-fixed bollards can be lifted off once the grout is broken out, and the foundation removed or reused. Plan for it if you think the layout may change.