Bollard Installers

East Riding of Yorkshire · England

Concrete bollard installation in Goole

Concrete bollards supplied and fitted in Goole, East Riding of Yorkshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.

Precast concrete bollards around the edge of a town square with granite paving, trees and benchesComputer-generated image

About concrete bollards in Goole

From high street shopfronts, small industrial units and community buildings, Goole has plenty of places where concrete bollards earn their keep. Precast concrete and reconstituted stone bollards for public realm, parks, boundaries and estates, dowelled or bedded in place.

We work across DN14 — Goole itself and places including Howden, Snaith, Rawcliffe and Eastrington. Nearby, we also work in Selby (9.5 miles), Scunthorpe (12.5 miles), Doncaster (16.2 miles) and Pontefract (17.8 miles), measured as the crow flies. Goole is about 22 miles from Hull.

Goole at a glance

Highway authority
East Riding of Yorkshire Council (local roads)
Planning authority
East Riding of Yorkshire Council
Postcodes
DN14
Guide price
Typically £165–£575 per bollard + VAT; minimum job £575
Survey
Free, with a fixed written quote
Nearby
Selby (9.5 mi), Scunthorpe (12.5 mi), Doncaster (16.2 mi), Pontefract (17.8 mi)

Goole: typical concrete bollard prices

SpecificationGuide priceIncludes
Standard£165–£345 + VATStandard post, foundation, reinstatement
Upgraded£295–£465 + VATUpgraded finish or fittings, reflective band, matched keys
Premium£415–£575 + VATHeavy-duty or architectural spec, premium finish

Per bollard, supplied and installed; -3% for Yorkshire and the Humber. Guide only — the fixed price follows a survey.

Typical concrete bollards jobs in Goole

Around Goole, concrete bollards usually solve one of these:

  • Rural and coastal sites where steel would corrode
  • Park entrances and greens where vehicles should not drive
  • Retail parks and landscaped car parks

Permissions and groundwork in Goole

The highway authority for local roads in Goole is East Riding of Yorkshire Council; motorways and trunk roads sit with National Highways. Concrete bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (East Riding of Yorkshire Council) first — we flag this at survey.

Park and verge locations often have tree roots nearby, which need protecting and can push bollards over time if set too close. Each post sits on a concrete base on firm ground, and on soft verges or made ground the base is deepened or widened to suit.

  • On public highway or council land, agree positions and specification with the highway authority or landowner.
  • Use contrasting colours or bands so grey bollards stand out against grey paving.

Installation, step by step

Set the bollards

Each bollard is lowered onto a mortar bed with its dowel grouted in, checked plumb and aligned with its neighbours.

Reinstate and clean

Paving is made good around each base and the bollards are cleaned of mortar and handling marks.

Protect while the grout cures

Bollards are left undisturbed until the grout and foundation have gained strength, with temporary barriers if vehicles use the area. Lines that need to open to traffic quickly can use faster-setting grouts where the product allows.

Options to consider

OptionDetail
Precast concreteGrey or coloured concrete in round, square, tapered or domed shapes, the economical public realm option.
Dowel-fixed or root-setDowels grouted into a foundation for most installations; root-set posts buried in the ground on softer sites.
Reconstituted stoneCrushed natural stone in a concrete mix, giving a Portland, buff or granite-like appearance for civic and heritage settings.

What moves the price in Goole

When we price concrete bollards in Goole, these make the biggest difference:

  • Size, shape and surface finish
  • Foundation depth and ground conditions
  • Precast concrete or reconstituted stone

After installation

Small chips can be repaired with a colour-matched mortar, but a bollard that has cracked through or sheared at the dowel needs replacing. In areas salted heavily in winter, check for surface spalling.

For damaged or loose posts in Goole, repairs and replacements are priced in writing first.

Common questions

Do you install concrete bollards in Goole?

We cover all of Goole (DN14) and the rest of East Riding of Yorkshire. We also work in Selby, Scunthorpe and Doncaster.

Do I need consent for concrete bollards on a public footway in Goole?

In Goole, work on adopted pavements and verges needs consent from East Riding of Yorkshire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.

What's a typical price for concrete bollards in Goole?

In Goole, typically £165–£575 per bollard, supplied and installed, plus VAT, with a minimum job of £575 plus VAT, using our Yorkshire and the Humber guide prices. The fixed figure comes in writing after we've seen the site.

How heavy are concrete bollards?

Often well over a hundred kilograms each, and larger designs several times that. The exact weight depends on size and shape. It means they are delivered and set using lifting equipment rather than by hand.

How are concrete bollards fixed down?

Usually with a steel dowel at the base grouted into a small concrete foundation, so they cannot be pushed or rocked. Some designs have a root buried in the ground instead. Free-standing placement is used only for temporary layouts.

Concrete bollards in nearby towns

More from us in Goole

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote