Bollard Installers

Essex · England

Concrete bollard installation in Harlow

Planning concrete bollards in Harlow? We check ownership, consents and buried services first, then quote a fixed price.

Precast concrete bollards around the edge of a town square with granite paving, trees and benchesComputer-generated image

Concrete bollards in Harlow

In the town of Harlow, concrete bollards tend to go in at leisure centres, housing association car parks and college campuses. Finishes range from plain grey concrete to exposed aggregate and stone-effect surfaces that suit civic and landscaped settings.

Coverage in Harlow takes in the CM20, CM18, CM17 and CM19 postcode districts and nearby places like Eastwick and Foster Street. We also cover neighbouring Hoddesdon (5.4 miles), Bishop's Stortford (6.8 miles), Waltham Abbey (7.9 miles) and Cheshunt (8 miles) — distances are straight-line. Harlow is about 24 miles from Luton.

Harlow at a glance

Area
Essex, England
Highway authority
Essex County Council (local roads)
Planning authority
the council for Harlow
Postcodes
CM20, CM18, CM17 and CM19
Guide price
Typically £185–£615 per bollard + VAT; minimum job £605
Survey
Free, with a fixed written quote
Nearby
Hoddesdon (5.4 mi), Bishop's Stortford (6.8 mi), Waltham Abbey (7.9 mi), Cheshunt (8 mi)

Guide prices for Harlow

SpecificationGuide priceIncludes
Standard£185–£365 + VATStandard post, foundation, reinstatement
Upgraded£315–£495 + VATUpgraded finish or fittings, reflective band, matched keys
Premium£435–£615 + VATHeavy-duty or architectural spec, premium finish

Per bollard, supplied and installed; +3% for East of England. Guide only — the fixed price follows a survey.

Concrete bollards in Harlow: common uses

Common uses in a place like Harlow:

  • School, library and civic building forecourts
  • Park entrances and greens where vehicles should not drive
  • Rural and coastal sites where steel would corrode

Consents, ground and services in Harlow

Essex County Council is the highway authority covering Harlow's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.

Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Harlow) first — we flag this at survey.

Each post sits on a concrete base on firm ground, and on soft verges or made ground the base is deepened or widened to suit. Services under footways are traced before excavation.

  • Do not present untested concrete bollards as crash-rated protection.
  • On public highway or council land, agree positions and specification with the highway authority or landowner.

Installation, step by step

Excavate and cast foundations

Small foundations are excavated, checked for services and cast with a dowel hole or sleeve at the right position and level.

Set the bollards

Each bollard is lowered onto a mortar bed with its dowel grouted in, checked plumb and aligned with its neighbours.

Reinstate and clean

Paving is made good around each base and the bollards are cleaned of mortar and handling marks.

Choosing the right spec

OptionDetail
Planters and blocksConcrete planters and seating blocks used in place of bollards where a softer look is wanted.
Surface finishesSmooth, exposed aggregate, acid-etched or shot-blasted, chosen to suit paving and resist visible weathering.
Dowel-fixed or root-setDowels grouted into a foundation for most installations; root-set posts buried in the ground on softer sites.

What affects the quote

Our East of England guide prices are a starting point; the survey in Harlow firms them up. What tends to move them:

  • Precast concrete or reconstituted stone
  • Size, shape and surface finish
  • Reinstatement of paving or turf

After installation

Keep a note of the product name, finish and supplier, because matching a single damaged bollard years later is much easier when the original specification is known. If a line is regularly struck by vehicles, consider whether steel cores, a tested product or a different layout would suit better.

For damaged or loose posts in Harlow, repairs and replacements are priced in writing first.

Concrete bollards in Harlow: FAQs

Can you install concrete bollards anywhere in Harlow?

We cover all of Harlow (CM20, CM18, CM17 and CM19) and the rest of Essex. We also work in Hoddesdon, Bishop's Stortford and Waltham Abbey.

Who gives permission for bollards on the pavement in Harlow?

In Harlow, work on adopted pavements and verges needs consent from Essex County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.

What's a typical price for concrete bollards in Harlow?

In Harlow, typically £185–£615 per bollard, supplied and installed, plus VAT, with a minimum job of £605 plus VAT, using our East of England guide prices. The fixed figure comes in writing after we've seen the site.

How heavy are concrete bollards?

Often well over a hundred kilograms each, and larger designs several times that. The exact weight depends on size and shape. It means they are delivered and set using lifting equipment rather than by hand.

Should we use concrete or steel bollards?

Concrete suits landscaped and public spaces where appearance and low maintenance matter and where impacts are rare. Steel suits car parks and yards where knocks are frequent, because it bends rather than shatters. Many schemes use both in different places.

Concrete bollards near Harlow

Other bollard services in Harlow

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote