Hampshire · England
Concrete bollard installation in Fleet
Local installation of concrete bollards in Fleet — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout concrete bollards in Fleet
From local parades, filling-station forecourts and small industrial units, Fleet has plenty of places where concrete bollards earn their keep. Finishes range from plain grey concrete to exposed aggregate and stone-effect surfaces that suit civic and landscaped settings.
Coverage in Fleet takes in the GU51, GU52, RG27 and RG29 postcode districts and nearby places like Elvetham Heath, Crookham Village, Hartley Wintney and Phoenix Green. Jobs in Fleet can be combined with work in Farnborough (3.4 miles), Aldershot (3.9 miles), Yateley (4.1 miles) and Sandhurst (4.8 miles) (straight-line distances). It sits roughly 13 miles from Reading as the crow flies.
Fleet at a glance
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for Hart
- Postcodes
- GU51, GU52, RG27 and RG29
- Guide price
- Typically £185–£635 per bollard + VAT; minimum job £625
- Survey
- Free, with a fixed written quote
- Nearby
- Farnborough (3.4 mi), Aldershot (3.9 mi), Yateley (4.1 mi), Sandhurst (4.8 mi)
Where concrete bollards go in around Fleet
Common uses in a place like Fleet:
- School, library and civic building forecourts
- Retail parks and landscaped car parks
- Park entrances and greens where vehicles should not drive
What concrete bollards cost in Fleet
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£375 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £315–£505 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £455–£635 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
What we check first in Fleet
The highway authority for local roads in Fleet is Hampshire County Council; motorways and trunk roads sit with National Highways. Concrete bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Hart) first — we flag this at survey.
Park and verge locations often have tree roots nearby, which need protecting and can push bollards over time if set too close. Access for the lifting vehicle matters: soft grass, paving and kerbs can be damaged by an outrigger, so ground protection mats are often laid before lifting begins.
- Do not present untested concrete bollards as crash-rated protection.
- Use contrasting colours or bands so grey bollards stand out against grey paving.
From survey to handover
Plan lifting
Each bollard's weight is checked, and a lifting method is chosen, such as a vacuum lifter or crane arm, with an exclusion zone set during lifts.
Set the bollards
Each bollard is lowered onto a mortar bed with its dowel grouted in, checked plumb and aligned with its neighbours.
Reinstate and clean
Paving is made good around each base and the bollards are cleaned of mortar and handling marks.
Specification choices
| Option | Detail |
|---|---|
| Surface finishes | Smooth, exposed aggregate, acid-etched or shot-blasted, chosen to suit paving and resist visible weathering. |
| Dowel-fixed or root-set | Dowels grouted into a foundation for most installations; root-set posts buried in the ground on softer sites. |
| Precast concrete | Grey or coloured concrete in round, square, tapered or domed shapes, the economical public realm option. |
What moves the price in Fleet
Two Fleet jobs with the same number of posts can price quite differently. The usual reasons:
- Number of bollards
- Lifting equipment and access for delivery
- Precast concrete or reconstituted stone
After installation
Keep a note of the product name, finish and supplier, because matching a single damaged bollard years later is much easier when the original specification is known. Small chips can be repaired with a colour-matched mortar, but a bollard that has cracked through or sheared at the dowel needs replacing.
We can also service, repair or replace existing posts anywhere in Fleet.
Questions about concrete bollards in Fleet
Which parts of Fleet do you cover for concrete bollards?
We cover all of Fleet (GU51, GU52, RG27 and RG29) and the rest of Hampshire. We also work in Farnborough, Aldershot and Yateley.
Who gives permission for bollards on the pavement in Fleet?
The highway authority for local roads in Fleet is Hampshire County Council; motorways and trunk roads sit with National Highways. Concrete bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for concrete bollards in Fleet?
In Fleet, typically £185–£635 per bollard, supplied and installed, plus VAT, with a minimum job of £625 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
How heavy are concrete bollards?
Often well over a hundred kilograms each, and larger designs several times that. The exact weight depends on size and shape. It means they are delivered and set using lifting equipment rather than by hand.
How are concrete bollards fixed down?
Usually with a steel dowel at the base grouted into a small concrete foundation, so they cannot be pushed or rocked. Some designs have a root buried in the ground instead. Free-standing placement is used only for temporary layouts.
Concrete bollards near Fleet
- Farnborough (3.4 mi)
- Aldershot (3.9 mi)
- Yateley (4.1 mi)
- Sandhurst (4.8 mi)
- Farnham (5 mi)
- Camberley (5.4 mi)