London · England
Concrete bollard installation in Barnet
Planning concrete bollards in Barnet? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageBarnet concrete bollards
In the borough of Barnet, concrete bollards tend to go in at estate car parks, hospital approaches and places of worship. Finishes range from plain grey concrete to exposed aggregate and stone-effect surfaces that suit civic and landscaped settings.
We cover Barnet's EN5, EN4, NW7, N3, N12 and NW4 postcode districts, including places such as Kitts End, Rowley Green, Edgware and Finchley. Jobs in Barnet can be combined with work in Borehamwood (4.1 miles), Brent (4.3 miles), Haringey (4.8 miles) and Camden (5.2 miles) (straight-line distances).
Local details
- Area
- London, England
- Highway authority
- Barnet Council (local roads)
- Planning authority
- Barnet Council
- Postcodes
- EN5, EN4, NW7, N3, N12, NW4, N20 and N2
- Guide price
- Typically £205–£685 per bollard + VAT; minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Borehamwood (4.1 mi), Brent (4.3 mi), Haringey (4.8 mi), Camden (5.2 mi)
What concrete bollards cost in Barnet
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £205–£405 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £345–£545 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £495–£685 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +15% for London. Guide only — the fixed price follows a survey.
What Barnet sites use concrete bollards for
Typical reasons Barnet sites choose concrete bollards:
- Town centre squares and pedestrianised streets
- Park entrances and greens where vehicles should not drive
- Housing estates and communal areas
Consents, ground and services in Barnet
Barnet Council is the highway authority covering Barnet's local roads. Red routes are managed by Transport for London. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Barnet is listed or inside a conservation area, check with the local planning authority (Barnet Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Each post sits on a concrete base on firm ground, and on soft verges or made ground the base is deepened or widened to suit. Access for the lifting vehicle matters: soft grass, paving and kerbs can be damaged by an outrigger, so ground protection mats are often laid before lifting begins.
- Use contrasting colours or bands so grey bollards stand out against grey paving.
- Plan lifts with an exclusion zone and suitable lifting equipment, and record the method for the site.
What happens on site
Excavate and cast foundations
Small foundations are excavated, checked for services and cast with a dowel hole or sleeve at the right position and level.
Set the bollards
Each bollard is lowered onto a mortar bed with its dowel grouted in, checked plumb and aligned with its neighbours.
Reinstate and clean
Paving is made good around each base and the bollards are cleaned of mortar and handling marks.
Choosing the right spec
| Option | Detail |
|---|---|
| Planters and blocks | Concrete planters and seating blocks used in place of bollards where a softer look is wanted. |
| Reconstituted stone | Crushed natural stone in a concrete mix, giving a Portland, buff or granite-like appearance for civic and heritage settings. |
| Surface finishes | Smooth, exposed aggregate, acid-etched or shot-blasted, chosen to suit paving and resist visible weathering. |
Pricing concrete bollards in Barnet
Two Barnet jobs with the same number of posts can price quite differently. The usual reasons:
- Reinstatement of paving or turf
- Lifting equipment and access for delivery
- Size, shape and surface finish
Keeping them working
Small chips can be repaired with a colour-matched mortar, but a bollard that has cracked through or sheared at the dowel needs replacing. If a line is regularly struck by vehicles, consider whether steel cores, a tested product or a different layout would suit better.
We can also service, repair or replace existing posts anywhere in Barnet.
Common questions
Can you install concrete bollards anywhere in Barnet?
We cover all of Barnet (EN5, EN4, NW7, N3, N12 and NW4) and the rest of London. We also work in Borehamwood, Brent and Haringey.
Do I need consent for concrete bollards on a public footway in Barnet?
The highway authority for local roads in Barnet is Barnet Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Concrete bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do concrete bollards cost in Barnet?
In Barnet, typically £205–£685 per bollard, supplied and installed, plus VAT, with a minimum job of £675 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
How are concrete bollards fixed down?
Usually with a steel dowel at the base grouted into a small concrete foundation, so they cannot be pushed or rocked. Some designs have a root buried in the ground instead. Free-standing placement is used only for temporary layouts.
Should we use concrete or steel bollards?
Concrete suits landscaped and public spaces where appearance and low maintenance matter and where impacts are rare. Steel suits car parks and yards where knocks are frequent, because it bends rather than shatters. Many schemes use both in different places.
Concrete bollards near Barnet
- Borehamwood (4.1 mi)
- Brent (4.3 mi)
- Haringey (4.8 mi)
- Camden (5.2 mi)
- Harrow (5.5 mi)
- Potters Bar (5.8 mi)