South Yorkshire · England
Concrete bollard installation in Sheffield
Concrete bollards for sites across Sheffield and the rest of South Yorkshire, from the first measurement to the last relaid paving block.
Computer-generated imageConcrete bollards in Sheffield
We supply and fit concrete bollards throughout Sheffield, typically for sites such as pedestrianised streets, university campuses and distribution parks. Finishes range from plain grey concrete to exposed aggregate and stone-effect surfaces that suit civic and landscaped settings.
We cover every part of Sheffield in the S1, S3, S2, S4, S7 and S10 postcode districts. We also cover neighbouring Dronfield (5.6 miles), Rotherham (5.6 miles), Chapeltown (5.7 miles) and Chesterfield (9.4 miles) — distances are straight-line. It sits roughly 29 miles from Leeds as the crow flies.
Key facts for this area
- Area
- South Yorkshire, England
- Highway authority
- Sheffield City Council (local roads)
- Planning authority
- Sheffield City Council
- Postcodes
- S1, S3, S2, S4, S7, S10, S9 and S11
- Guide price
- Typically £165–£575 per bollard + VAT; minimum job £575
- Survey
- Free, with a fixed written quote
- Nearby
- Dronfield (5.6 mi), Rotherham (5.6 mi), Chapeltown (5.7 mi), Chesterfield (9.4 mi)
Guide prices for Sheffield
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £165–£345 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £295–£465 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £415–£575 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Yorkshire and the Humber. Guide only — the fixed price follows a survey.
Typical concrete bollards jobs in Sheffield
Common uses in a place like Sheffield:
- Retail parks and landscaped car parks
- Town centre squares and pedestrianised streets
- Park entrances and greens where vehicles should not drive
Permissions and groundwork in Sheffield
The highway authority for local roads in Sheffield is Sheffield City Council; motorways and trunk roads sit with National Highways. Concrete bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Sheffield is listed or inside a conservation area, check with the local planning authority (Sheffield City Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Because concrete bollards are heavy, a weak foundation shows itself quickly as a tilt. Access for the lifting vehicle matters: soft grass, paving and kerbs can be damaged by an outrigger, so ground protection mats are often laid before lifting begins.
- Use contrasting colours or bands so grey bollards stand out against grey paving.
- Keep clear gaps of typically at least 1,000–1,200 mm where pedestrians pass, checking against Inclusive Mobility guidance.
What happens on site
Survey and choose
A free site survey looks at the setting, ground, delivery access and where a lifting vehicle can stand. You receive a fixed written quote with the product, finish and fixing.
Set the bollards
Each bollard is lowered onto a mortar bed with its dowel grouted in, checked plumb and aligned with its neighbours.
Reinstate and clean
Paving is made good around each base and the bollards are cleaned of mortar and handling marks.
Choosing the right spec
| Option | Detail |
|---|---|
| Surface finishes | Smooth, exposed aggregate, acid-etched or shot-blasted, chosen to suit paving and resist visible weathering. |
| Reflective and contrasting details | Inset reflective bands, contrasting tops or rings for visibility to drivers and partially sighted pedestrians. |
| Planters and blocks | Concrete planters and seating blocks used in place of bollards where a softer look is wanted. |
Pricing concrete bollards in Sheffield
Two Sheffield jobs with the same number of posts can price quite differently. The usual reasons:
- Number of bollards
- Lifting equipment and access for delivery
- Precast concrete or reconstituted stone
Keeping them working
Small chips can be repaired with a colour-matched mortar, but a bollard that has cracked through or sheared at the dowel needs replacing. Keep a note of the product name, finish and supplier, because matching a single damaged bollard years later is much easier when the original specification is known.
We can also service, repair or replace existing posts anywhere in Sheffield.
Common questions
Can you install concrete bollards anywhere in Sheffield?
We cover all of Sheffield (S1, S3, S2, S4, S7 and S10) and the rest of South Yorkshire. We also work in Dronfield, Rotherham and Chapeltown.
Who gives permission for bollards on the pavement in Sheffield?
The highway authority for local roads in Sheffield is Sheffield City Council; motorways and trunk roads sit with National Highways. Concrete bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do concrete bollards cost in Sheffield?
In Sheffield, typically £165–£575 per bollard, supplied and installed, plus VAT, with a minimum job of £575 plus VAT, using our Yorkshire and the Humber guide prices. The fixed figure comes in writing after we've seen the site.
How heavy are concrete bollards?
Often well over a hundred kilograms each, and larger designs several times that. The exact weight depends on size and shape. It means they are delivered and set using lifting equipment rather than by hand.
Can concrete bollards be moved later?
Yes, though it takes lifting equipment. Dowel-fixed bollards can be lifted off once the grout is broken out, and the foundation removed or reused. Plan for it if you think the layout may change.
Concrete bollards near Sheffield
- Dronfield (5.6 mi)
- Rotherham (5.6 mi)
- Chapeltown (5.7 mi)
- Chesterfield (9.4 mi)
- Staveley (9.4 mi)
- Barnsley (11.6 mi)