Tyne and Wear · England
Concrete bollard installation in Gateshead
Planning concrete bollards in Gateshead? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout concrete bollards in Gateshead
We supply and fit concrete bollards throughout Gateshead, typically for sites such as high streets, industrial estates and business parks. Finishes range from plain grey concrete to exposed aggregate and stone-effect surfaces that suit civic and landscaped settings.
We cover Gateshead's NE8, NE11, NE10, NE9, NE16 and NE21 postcode districts, including places such as Blaydon, Kibblesworth, Whickham and Sunniside. Jobs in Gateshead can be combined with work in Newcastle upon Tyne (0.9 miles), Felling (1.4 miles), Wallsend (3.4 miles) and Hebburn (3.5 miles) (straight-line distances).
Gateshead at a glance
- Area
- Tyne and Wear, England
- Highway authority
- Gateshead Council (local roads)
- Planning authority
- Gateshead Council
- Postcodes
- NE8, NE11, NE10, NE9, NE16 and NE21
- Guide price
- Typically £165–£575 per bollard + VAT; minimum job £565
- Survey
- Free, with a fixed written quote
- Nearby
- Newcastle upon Tyne (0.9 mi), Felling (1.4 mi), Wallsend (3.4 mi), Hebburn (3.5 mi)
Guide prices for Gateshead
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £165–£335 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £285–£455 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £405–£575 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -4% for North East. Guide only — the fixed price follows a survey.
Typical concrete bollards jobs in Gateshead
Around Gateshead, concrete bollards usually solve one of these:
- Town centre squares and pedestrianised streets
- Rural and coastal sites where steel would corrode
- Edges of open land and verges subject to unauthorised vehicle access
What we check first in Gateshead
The highway authority for local roads in Gateshead is Gateshead Council; motorways and trunk roads sit with National Highways. Concrete bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Gateshead is listed or inside a conservation area, check with the local planning authority (Gateshead Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Access for the lifting vehicle matters: soft grass, paving and kerbs can be damaged by an outrigger, so ground protection mats are often laid before lifting begins. Because concrete bollards are heavy, a weak foundation shows itself quickly as a tilt.
- Keep clear gaps of typically at least 1,000–1,200 mm where pedestrians pass, checking against Inclusive Mobility guidance.
- Use contrasting colours or bands so grey bollards stand out against grey paving.
From survey to handover
Set the bollards
Each bollard is lowered onto a mortar bed with its dowel grouted in, checked plumb and aligned with its neighbours.
Reinstate and clean
Paving is made good around each base and the bollards are cleaned of mortar and handling marks.
Protect while the grout cures
Bollards are left undisturbed until the grout and foundation have gained strength, with temporary barriers if vehicles use the area. Lines that need to open to traffic quickly can use faster-setting grouts where the product allows.
Choosing the right spec
| Option | Detail |
|---|---|
| Surface finishes | Smooth, exposed aggregate, acid-etched or shot-blasted, chosen to suit paving and resist visible weathering. |
| Reflective and contrasting details | Inset reflective bands, contrasting tops or rings for visibility to drivers and partially sighted pedestrians. |
| Reconstituted stone | Crushed natural stone in a concrete mix, giving a Portland, buff or granite-like appearance for civic and heritage settings. |
What affects the quote
When we price concrete bollards in Gateshead, these make the biggest difference:
- Lifting equipment and access for delivery
- Number of bollards
- Reinstatement of paving or turf
After installation
Keep a note of the product name, finish and supplier, because matching a single damaged bollard years later is much easier when the original specification is known. If a line is regularly struck by vehicles, consider whether steel cores, a tested product or a different layout would suit better.
We can also service, repair or replace existing posts anywhere in Gateshead.
Common questions
Do you install concrete bollards in Gateshead?
We cover all of Gateshead (NE8, NE11, NE10, NE9, NE16 and NE21) and the rest of Tyne and Wear. We also work in Newcastle upon Tyne, Felling and Wallsend.
Who gives permission for bollards on the pavement in Gateshead?
In Gateshead, work on adopted pavements and verges needs consent from Gateshead Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for concrete bollards in Gateshead?
In Gateshead, typically £165–£575 per bollard, supplied and installed, plus VAT, with a minimum job of £565 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.
Are concrete bollards anti-ram?
Only if that specific product has been crash-tested. Weight alone does not make a bollard crash-rated, and an untested concrete post can crack or shear when hit hard. Tested concrete-clad products exist for security use.
Can concrete bollards be moved later?
Yes, though it takes lifting equipment. Dowel-fixed bollards can be lifted off once the grout is broken out, and the foundation removed or reused. Plan for it if you think the layout may change.
Concrete bollards near Gateshead
- Newcastle upon Tyne (0.9 mi)
- Felling (1.4 mi)
- Wallsend (3.4 mi)
- Hebburn (3.5 mi)
- Jarrow (4.8 mi)
- Washington (5.5 mi)