Ceredigion · Wales
Crash-rated bollard installation in Cardigan
Local installation of crash-rated bollards in Cardigan — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageCardigan crash-rated bollards
From town-centre squares, filling-station forecourts and schools, Cardigan has plenty of places where crash-rated bollards earn their keep. The rating only holds when the bollard is installed to the same foundation design that was tested.
We work across SA43 — Cardigan itself and places including Aberporth, Cilgerran, Parcllyn and Blaenporth. Nearby, we also work in Carmarthen (21.9 miles), measured as the crow flies.
Cardigan at a glance
- Area
- Ceredigion, Wales
- Highway authority
- Ceredigion County Council (local roads)
- Planning authority
- Ceredigion County Council
- Postcodes
- SA43
- Guide price
- Typically £1,945–£9,695 per bollard + VAT; minimum job £3,895
- Survey
- Free, with a fixed written quote
- Nearby
- Carmarthen (21.9 mi)
Crash-rated bollard prices in Cardigan
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£5,195 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,245–£7,545 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,595–£9,695 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; -3% for Wales. Guide only — the fixed price follows a survey.
What Cardigan sites use crash-rated bollards for
Common uses in a place like Cardigan:
- Sites where a vehicle dynamics assessment shows a long straight run-up
- Data centres, utilities and critical infrastructure perimeters
- Stadiums, arenas and event venues with predictable crowd flows
Permissions and groundwork in Cardigan
In Cardigan the highway authority for local roads is Ceredigion County Council. We confirm whether the ground is adopted highway before quoting, because crash-rated bollards on a public footway need its agreement first.
If your site in Cardigan is listed or inside a conservation area, check with the local planning authority (Ceredigion County Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Rated foundations are large, and excavation is often where projects run into trouble. Footways and forecourts in towns are usually crowded with cables, gas mains, water pipes and old drainage, and a single unexpected duct can stop a bollard position.
- Balance the gaps: narrow enough to stop a vehicle, typically no more than about 1,200 mm, but wide enough for wheelchair users and buggies — check against Inclusive Mobility guidance.
- Confirm who owns the land: works on public highway usually need the highway authority's agreement, and permanent street furniture there may need a licence.
Installation, step by step
Free site survey and ground checks
A free site survey looks at access, surfaces and likely services, followed by utility searches, radar scanning and trial holes where needed. You then receive a fixed written quote based on what the survey found.
Cure, protect and reinstate
The posts are protected while the concrete gains strength, and the surface is reinstated to match. The line should not be treated as fully effective until the specified curing period has passed.
Hand over a build record
You receive photographs of the reinforcement and excavation before each pour, concrete delivery tickets, as-built positions and the manufacturer's product certification, ready for your adviser and insurers.
Choosing the right spec
| Option | Detail |
|---|---|
| Heights and diameters | Exposed heights are commonly around 800 to 1,000 mm, with core diameters varying by model and rating. Larger diameters are not always needed to achieve a given rating. |
| Finishes and visibility bands | Galvanised and powder-coated finishes in RAL colours, with contrasting or reflective bands near the top so the posts are visible to pedestrians and drivers. |
| Deep or standard foundation designs | Deep foundations suit open ground where excavation is unrestricted. Where services or slabs get in the way, shallow-mount tested designs may be a better fit. |
What affects the quote
Our Wales guide prices are a starting point; the survey in Cardigan firms them up. What tends to move them:
- Traffic management, restricted working hours or night work in occupied sites
- Buried services, diversions and ground investigation
- Reinstatement of natural stone, tactile paving or specialist surfaces
After installation
Movable rated bollards need a planned servicing schedule. Static rated bollards need little routine work, but they should be inspected periodically and always after any impact.
For damaged or loose posts in Cardigan, repairs and replacements are priced in writing first.
Common questions
Can you install crash-rated bollards anywhere in Cardigan?
We cover all of Cardigan (SA43) and the rest of Ceredigion. We also work in Carmarthen.
Who gives permission for bollards on the pavement in Cardigan?
In Cardigan the highway authority for local roads is Ceredigion County Council. We confirm whether the ground is adopted highway before quoting, because crash-rated bollards on a public footway need its agreement first.
What's a typical price for crash-rated bollards in Cardigan?
In Cardigan, typically £1,945–£9,695 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,895 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Will you design our HVM layout?
No. Scheme design and threat assessment belong with your security adviser, a specialist consultant or the manufacturer's technical team. We install the products they specify, to the tested foundation, and work alongside them on site so the build matches the design.
What happens if a rated bollard is struck?
Make the area safe and have the post assessed before relying on it again. A rated bollard that has absorbed a serious impact is usually replaced, and the manufacturer may need to check the foundation or insert. We can install the replacement to the original tested detail.