Scotland · 2 towns
Crash-rated bollard installation in City of Edinburgh
Crash-rated bollards for sites across City of Edinburgh: surveyed, quoted in writing and installed by our crews.
Computer-generated imageCrash-rated bollards in City of Edinburgh
We supply and install crash-rated bollards across City of Edinburgh, with local pages for 2 towns below. Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation.
Highway and roads authorities for local roads in City of Edinburgh: City of Edinburgh Council.
Choose your town in City of Edinburgh
Guide prices in City of Edinburgh
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£5,345 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,395–£7,745 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,795–£9,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; no regional adjustment. Guide only — the fixed price follows a survey.
Who looks after the roads in City of Edinburgh
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Edinburgh | City of Edinburgh Council | City of Edinburgh Council |
| South Queensferry | City of Edinburgh Council | City of Edinburgh Council |
Rules for crash-rated bollards in Scotland
Works in a public road or footway need the roads authority's written consent under the Roads (Scotland) Act 1984. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Scotland.
How installation works
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Free site survey and ground checks
A free site survey looks at access, surfaces and likely services, followed by utility searches, radar scanning and trial holes where needed. You then receive a fixed written quote based on what the survey found.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Cure, protect and reinstate
The posts are protected while the concrete gains strength, and the surface is reinstated to match. The line should not be treated as fully effective until the specified curing period has passed.
Crash-rated bollards in City of Edinburgh: FAQs
Do you cover all of City of Edinburgh for crash-rated bollards?
Yes — including Edinburgh and South Queensferry. Enter your postcode in the price calculator to confirm.
How much do crash-rated bollards cost in City of Edinburgh?
In City of Edinburgh, typically £1,995–£9,995 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,995 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in City of Edinburgh?
The council is the roads authority for local roads (City of Edinburgh Council); Transport Scotland covers trunk roads. Works in a public road need the roads authority's written consent.
What does a crash rating code actually tell me?
It tells you the vehicle used in the test, how fast it was travelling, the angle it hit at and how far it got past the bollard line. Your security adviser compares those figures with the vehicle and speed achievable on your approach. A rating that does not match the site's real risk is either more than you need or not enough.
Will you design our HVM layout?
No. Scheme design and threat assessment belong with your security adviser, a specialist consultant or the manufacturer's technical team. We install the products they specify, to the tested foundation, and work alongside them on site so the build matches the design.