East Sussex · England
Crash-rated bollard installation in Crowborough
Planning crash-rated bollards in Crowborough? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageCrowborough crash-rated bollards
We supply and fit crash-rated bollards throughout Crowborough, typically for sites such as community car parks, schools and high street shopfronts. Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation.
We work across TN6, TN7, TN20 and RH18 — Crowborough itself and places including Rotherfield, Town Row, Boarshead and Marden's Hill. Nearby, we also work in Tunbridge Wells (6.6 miles), East Grinstead (8.5 miles), Tonbridge (10.4 miles) and Haywards Heath (12.4 miles), measured as the crow flies. Brighton is around 21 miles away.
Key facts for this area
- Area
- East Sussex, England
- Highway authority
- East Sussex County Council (local roads)
- Planning authority
- the council for Wealden
- Postcodes
- TN6, TN7, TN20 and RH18
- Guide price
- Typically £2,095–£10,595 per bollard + VAT; minimum job £4,245
- Survey
- Free, with a fixed written quote
- Nearby
- Tunbridge Wells (6.6 mi), East Grinstead (8.5 mi), Tonbridge (10.4 mi), Haywards Heath (12.4 mi)
Crash-rated bollard prices in Crowborough
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,095–£5,695 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,645–£8,245 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £7,195–£10,595 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; +6% for South East. Guide only — the fixed price follows a survey.
Crash-rated bollards in Crowborough: common uses
Typical reasons Crowborough sites choose crash-rated bollards:
- Transport interchanges, taxi ranks and drop-off zones
- Glazed frontages on corporate and public buildings
- Building entrances and forecourts flagged in a security risk assessment
Consents, ground and services in Crowborough
In Crowborough, work on adopted pavements and verges needs consent from East Sussex County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Crowborough is listed or inside a conservation area, check with the local planning authority (the council for Wealden) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Footways and forecourts in towns are usually crowded with cables, gas mains, water pipes and old drainage, and a single unexpected duct can stop a bollard position. Utility records, radar scanning and hand-dug trial holes come before any machine work, and service diversions can take longer than the bollard installation itself.
- Balance the gaps: narrow enough to stop a vehicle, typically no more than about 1,200 mm, but wide enough for wheelchair users and buggies — check against Inclusive Mobility guidance.
- Ask the local planning authority whether consent is needed, particularly in conservation areas or near listed buildings.
From survey to handover
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Fix reinforcement and set the posts
The reinforcement cage is built to the drawing and the bollards are held to line and level in templates. Concrete is poured to the specified grade, with samples taken for testing if the specification calls for them.
Choosing the right spec
| Option | Detail |
|---|---|
| Deep or standard foundation designs | Deep foundations suit open ground where excavation is unrestricted. Where services or slabs get in the way, shallow-mount tested designs may be a better fit. |
| Static rated bollards | Fixed posts for permanent lines where vehicles never need to pass. They are a straightforward rated option to install and maintain. |
| Rated removable or automatic posts | Where an entrance must open for deliveries or emergency vehicles, rated removable, retractable or automatic models are available. Check that the rating stated is for the exact model and position you are buying. |
Pricing crash-rated bollards in Crowborough
When we price crash-rated bollards in Crowborough, these make the biggest difference:
- Depth and volume of excavation, reinforcement and concrete
- Traffic management, restricted working hours or night work in occupied sites
- The rating required and the product range that achieves it
After installation
Look for cracked surfacing at the base, movement, damaged covers and faded bands. A rated bollard that has stopped a vehicle has done its job and should be assessed with the manufacturer; in most cases the post, and sometimes the foundation insert, is replaced rather than straightened.
We can also service, repair or replace existing posts anywhere in Crowborough.
Questions about crash-rated bollards in Crowborough
Do you install crash-rated bollards in Crowborough?
We cover all of Crowborough (TN6, TN7, TN20 and RH18) and the rest of East Sussex. We also work in Tunbridge Wells, East Grinstead and Tonbridge.
Who gives permission for bollards on the pavement in Crowborough?
East Sussex County Council is the highway authority covering Crowborough's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for crash-rated bollards in Crowborough?
In Crowborough, typically £2,095–£10,595 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £4,245 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
When can we rely on the new bollards?
Only once the concrete has reached the strength set in the specification. The posts are physically in place as soon as the pour is finished, but the rated performance depends on the foundation, and full design strength is commonly taken at around 28 days. Your adviser may arrange temporary measures to cover the gap.
Will you design our HVM layout?
No. Scheme design and threat assessment belong with your security adviser, a specialist consultant or the manufacturer's technical team. We install the products they specify, to the tested foundation, and work alongside them on site so the build matches the design.
Crash-rated bollards in nearby towns
- Tunbridge Wells (6.6 mi)
- East Grinstead (8.5 mi)
- Tonbridge (10.4 mi)
- Haywards Heath (12.4 mi)
- Hailsham (14.3 mi)
- Burgess Hill (14.7 mi)