Greater Manchester · England
Crash-rated bollard installation in Wigan
Crash-rated bollards for sites across Wigan and the rest of Greater Manchester, from the first measurement to the last relaid paving block.
Computer-generated imageAbout crash-rated bollards in Wigan
In the town of Wigan, crash-rated bollards tend to go in at town-centre streets, college campuses and retail parks. The rating only holds when the bollard is installed to the same foundation design that was tested.
Coverage in Wigan takes in the WN1, WN3, WN5 and WN6 postcode districts and nearby places like Standish, Red Rock, Orrell and Longshaw. Nearby, we also work in Hindley (2.3 miles), Ashton-in-Makerfield (3.9 miles), Westhoughton (4.6 miles) and Golborne (4.9 miles), measured as the crow flies. Wigan is about 15 miles from Preston.
Wigan at a glance
- Area
- Greater Manchester, England
- Highway authority
- Wigan Council (local roads)
- Planning authority
- Wigan Council
- Postcodes
- WN1, WN3, WN5 and WN6
- Guide price
- Typically £1,945–£9,795 per bollard + VAT; minimum job £3,895
- Survey
- Free, with a fixed written quote
- Nearby
- Hindley (2.3 mi), Ashton-in-Makerfield (3.9 mi), Westhoughton (4.6 mi), Golborne (4.9 mi)
Crash-rated bollards in Wigan: common uses
Common uses in a place like Wigan:
- Sites where a vehicle dynamics assessment shows a long straight run-up
- Data centres, utilities and critical infrastructure perimeters
- Building entrances and forecourts flagged in a security risk assessment
Crash-rated bollard prices in Wigan
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£5,245 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,295–£7,595 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,645–£9,795 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; -2% for North West. Guide only — the fixed price follows a survey.
Permissions and groundwork in Wigan
The highway authority for local roads in Wigan is Wigan Council; motorways and trunk roads sit with National Highways. Crash-rated bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Wigan Council) first — we flag this at survey.
Utility records, radar scanning and hand-dug trial holes come before any machine work, and service diversions can take longer than the bollard installation itself. Footways and forecourts in towns are usually crowded with cables, gas mains, water pipes and old drainage, and a single unexpected duct can stop a bollard position.
- Confirm who owns the land: works on public highway usually need the highway authority's agreement, and permanent street furniture there may need a licence.
- Agree how emergency vehicles will get through, and refer to guidance on selecting and installing vehicle security barriers such as PAS 69 or ISO 22343-2.
Installation, step by step
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Cure, protect and reinstate
The posts are protected while the concrete gains strength, and the surface is reinstated to match. The line should not be treated as fully effective until the specified curing period has passed.
Hand over a build record
You receive photographs of the reinforcement and excavation before each pour, concrete delivery tickets, as-built positions and the manufacturer's product certification, ready for your adviser and insurers.
Choosing the right spec
| Option | Detail |
|---|---|
| Rated removable or automatic posts | Where an entrance must open for deliveries or emergency vehicles, rated removable, retractable or automatic models are available. Check that the rating stated is for the exact model and position you are buying. |
| Decorative covers | Stainless steel, cast or polymer sleeves can be fitted over the steel core to suit a streetscape. Use covers supplied or approved by the manufacturer so the tested product is not altered. |
| Deep or standard foundation designs | Deep foundations suit open ground where excavation is unrestricted. Where services or slabs get in the way, shallow-mount tested designs may be a better fit. |
What moves the price in Wigan
Two Wigan jobs with the same number of posts can price quite differently. The usual reasons:
- Number of posts and whether a linked beam system is needed
- Buried services, diversions and ground investigation
- The rating required and the product range that achieves it
After installation
Look for cracked surfacing at the base, movement, damaged covers and faded bands. A rated bollard that has stopped a vehicle has done its job and should be assessed with the manufacturer; in most cases the post, and sometimes the foundation insert, is replaced rather than straightened.
We can also service, repair or replace existing posts anywhere in Wigan.
Common questions
Can you install crash-rated bollards anywhere in Wigan?
We cover all of Wigan (WN1, WN3, WN5 and WN6) and the rest of Greater Manchester. We also work in Hindley, Ashton-in-Makerfield and Westhoughton.
Who gives permission for bollards on the pavement in Wigan?
Wigan Council is the highway authority covering Wigan's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do crash-rated bollards cost in Wigan?
In Wigan, typically £1,945–£9,795 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,895 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
What does a crash rating code actually tell me?
It tells you the vehicle used in the test, how fast it was travelling, the angle it hit at and how far it got past the bollard line. Your security adviser compares those figures with the vehicle and speed achievable on your approach. A rating that does not match the site's real risk is either more than you need or not enough.
Is a heavy unrated steel post good enough instead?
Not where the risk is a deliberate vehicle attack. An unrated post may look solid, but nobody can say what it will stop because it has never been tested with its foundation. Unrated steel suits nuisance parking and low-speed knocks, not crowds or buildings flagged in a security assessment.
Crash-rated bollards near Wigan
- Hindley (2.3 mi)
- Ashton-in-Makerfield (3.9 mi)
- Westhoughton (4.6 mi)
- Golborne (4.9 mi)
- Skelmersdale (5.6 mi)
- Leigh (5.8 mi)