Bollard Installers

Derbyshire · England

Driveway security posts for homes in Ilkeston

Driveway security posts for sites across Ilkeston and the rest of Derbyshire, from the first measurement to the last relaid paving block.

Black driveway security post locked upright in front of a parked car on a semi-detached house drivewayComputer-generated image

About driveway security posts in Ilkeston

Telescopic, fold-down and removable security posts for home driveways, to deter car theft and stop unwanted parking. In Ilkeston, that tends to mean sites such as new-build estate drives, private parking bays and shared drives.

Coverage in Ilkeston takes in the DE7 postcode district and nearby places like West Hallam, Stanley Common and Stanton-by-Dale. Jobs in Ilkeston can be combined with work in Heanor (3.5 miles), Long Eaton (5.2 miles), Ripley (5.7 miles) and Hucknall (6.3 miles) (straight-line distances). Nottingham is around 7 miles away.

Ilkeston at a glance

Area
Derbyshire, England
Highway authority
Derbyshire County Council (local roads)
Planning authority
the council for Erewash
Postcodes
DE7
Guide price
Typically £375–£825 per post inc VAT; minimum job £385
Survey
Free, with a fixed written quote
Nearby
Heanor (3.5 mi), Long Eaton (5.2 mi), Ripley (5.7 mi), Hucknall (6.3 mi)

Ilkeston: typical driveway security post prices

SpecificationGuide priceIncludes
Standard£375–£565 inc VATStandard post, foundation, reinstatement
Upgraded£515–£705 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£645–£825 inc VATHeavy-duty or architectural spec, premium finish

Per post, supplied and installed; -2% for East Midlands. Guide only — the fixed price follows a survey.

Driveway security posts in Ilkeston: common uses

Typical reasons Ilkeston sites choose driveway security posts:

  • Open-plan frontages without gates
  • Drives where a gate would not fit or is not allowed
  • Houses near stations, schools or shops where drives get borrowed

Permissions and groundwork in Ilkeston

Derbyshire County Council is the highway authority covering Ilkeston's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.

Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Erewash) first — we flag this at survey.

Domestic drives hide more than people expect. We scan and hand-dig before cutting deep for a telescopic cassette.

  • In conservation areas or at listed buildings, check with the local planning authority before fitting visible posts.
  • Make sure the post is on your own land; a post on the pavement or the dropped kerb needs the highway authority's agreement.

What happens on site

Free home survey

We look at your drive, how and where you park, the surface and what might be under it, such as the water pipe or a gas service. You receive a fixed written quote with the post type and position marked.

Mark the position

The position is marked with the car in place, so we can check it blocks the car and that you can still open doors and walk past.

Cut the surface

Block paving is lifted carefully for reuse; tarmac, concrete or resin is cut neatly to keep the patch as small as possible.

Specification choices

OptionDetail
Keyed-alike locksTwo posts or more can be supplied so one key opens both, which helps households with several cars.
Removable postsLift out of a shallow socket and lock in place. Simple and low cost to fit, but must be stored when out.
FinishesBlack, grey, yellow or stainless finishes, with reflective bands so visitors see the post at night.

What affects the quote

Our East Midlands guide prices are a starting point; the survey in Ilkeston firms them up. What tends to move them:

  • Drainage for telescopic and semi-automatic cassettes
  • Drive surface and how visible a repair will be
  • Depth available and services under the drive

Looking after them

With telescopic and semi-automatic posts, lift the lid every few months and check the cassette is not holding water or silt. Fold-down posts need the hinge oiled and anchors checked.

We can also service, repair or replace existing posts anywhere in Ilkeston.

Common questions

Can you install driveway security posts anywhere in Ilkeston?

We cover all of Ilkeston (DE7) and the rest of Derbyshire. We also work in Heanor, Long Eaton and Ripley.

Do I need consent for driveway security posts on a public footway in Ilkeston?

Derbyshire County Council is the highway authority covering Ilkeston's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.

What's a typical price for driveway security posts in Ilkeston?

In Ilkeston, typically £375–£825 per post, supplied and installed, including VAT, with a minimum job of £385 plus VAT, using our East Midlands guide prices. The fixed figure comes in writing after we've seen the site.

What if I lose the key to my driveway post?

Keep the spare somewhere safe. If both are lost, many lock cylinders can be replaced, but sometimes the lock has to be drilled. That is a paid repair visit, so a spare key is worth having.

Do I need two posts for two cars?

Not always. On a narrow drive where one car parks behind the other, one post at the front may be enough. On a wide drive with cars side by side, two posts are usually needed to block both.

Driveway security posts near Ilkeston

Other bollard services in Ilkeston

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote