Dorset · England
Driveway security posts for homes in Poole
Local installation of driveway security posts in Poole — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout driveway security posts in Poole
The common types are telescopic posts that retract into the ground, fold-down posts that hinge flat, and removable posts that lift out of a socket. In Poole, that tends to mean sites such as new-build estate drives, carports and driveways.
We cover the BH15, BH14, BH17, BH13, BH12 and BH18 postcode districts in Poole. We also cover neighbouring Bournemouth (4.6 miles), Christchurch (9 miles), New Milton (14.2 miles) and Weymouth (21.9 miles) — distances are straight-line. It sits roughly 29 miles from Southampton as the crow flies.
Key facts for this area
- Area
- Dorset, England
- Highway authority
- Bournemouth, Christchurch and Poole Council (local roads)
- Planning authority
- Bournemouth, Christchurch and Poole Council
- Postcodes
- BH15, BH14, BH17, BH13, BH12 and BH18
- Guide price
- Typically £385–£845 per post inc VAT; minimum job £395
- Survey
- Free, with a fixed written quote
- Nearby
- Bournemouth (4.6 mi), Christchurch (9 mi), New Milton (14.2 mi), Weymouth (21.9 mi)
Typical driveway security posts jobs in Poole
Around Poole, driveway security posts usually solve one of these:
- Homes worried about keyless or relay car theft
- Houses near stations, schools or shops where drives get borrowed
- Drives where a gate would not fit or is not allowed
What driveway security posts cost in Poole
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£575 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £525–£715 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £665–£845 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Poole
The highway authority for local roads in Poole is Bournemouth, Christchurch and Poole Council; motorways and trunk roads sit with National Highways. Driveway security posts on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Bournemouth, Christchurch and Poole Council) first — we flag this at survey.
Clay soils hold water, so a telescopic or semi-automatic cassette there needs a proper soakaway or a connection to a surface water drain, never the foul drain. Block paving reinstates well because the original blocks can go back; tarmac, resin-bound and imprinted concrete show patching, so we keep cuts tight and positions sensible.
- In conservation areas or at listed buildings, check with the local planning authority before fitting visible posts.
- Connect any cassette drainage to surface water or a soakaway, not to the foul drain.
How the job runs
Free home survey
We look at your drive, how and where you park, the surface and what might be under it, such as the water pipe or a gas service. You receive a fixed written quote with the post type and position marked.
Mark the position
The position is marked with the car in place, so we can check it blocks the car and that you can still open doors and walk past.
Fit the post
Telescopic cassettes and removable sockets are set flush in concrete with drainage beneath. Fold-down posts are anchored to concrete or a small new pad.
Options to consider
| Option | Detail |
|---|---|
| Semi-automatic posts | Rise on their own when unlocked and push down to lower. Easier for daily use than lifting a post. |
| Keyed-alike locks | Two posts or more can be supplied so one key opens both, which helps households with several cars. |
| Removable posts | Lift out of a shallow socket and lock in place. Simple and low cost to fit, but must be stored when out. |
What moves the price in Poole
Our South West guide prices are a starting point; the survey in Poole firms them up. What tends to move them:
- Finish and keyed-alike locks
- Depth available and services under the drive
- Type of post: telescopic, fold-down, removable or semi-automatic
Keeping them working
If the post becomes stiff, deal with it early, because a post that is awkward to use is a post that stops being locked. Keep a spare key somewhere safe away from the car keys.
For damaged or loose posts in Poole, repairs and replacements are priced in writing first.
Common questions
Do you install driveway security posts in Poole?
We cover all of Poole (BH15, BH14, BH17, BH13, BH12 and BH18) and the rest of Dorset. We also work in Bournemouth, Christchurch and New Milton.
Who gives permission for bollards on the pavement in Poole?
The highway authority for local roads in Poole is Bournemouth, Christchurch and Poole Council; motorways and trunk roads sit with National Highways. Driveway security posts on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for driveway security posts in Poole?
In Poole, typically £385–£845 per post, supplied and installed, including VAT, with a minimum job of £395 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Do I need two posts for two cars?
Not always. On a narrow drive where one car parks behind the other, one post at the front may be enough. On a wide drive with cars side by side, two posts are usually needed to block both.
Where should a driveway security post go?
Close enough in front of the car, or between it and the road, that the car cannot be driven round it. We mark the position with your car in place during the survey. Sloping drives and wide frontages may change the obvious spot.