Essex · England
Driveway security posts for homes in Chelmsford
Local installation of driveway security posts in Chelmsford — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageDriveway security posts in Chelmsford
We supply and fit driveway security posts throughout Chelmsford, typically for sites such as private parking bays, new-build estate drives and driveways. The common types are telescopic posts that retract into the ground, fold-down posts that hinge flat, and removable posts that lift out of a socket.
We work across CM1, CM2 and CM3 — Chelmsford itself and places including Writtle, Roxwell, Edney Common and Loves Green. Nearby, we also work in Billericay (7.7 miles), Witham (8.5 miles), Maldon (8.8 miles) and Wickford (8.9 miles), measured as the crow flies. It sits roughly 17 miles from Southend-on-Sea as the crow flies.
Key facts for this area
- Area
- Essex, England
- Highway authority
- Essex County Council (local roads)
- Planning authority
- the council for Chelmsford
- Postcodes
- CM1, CM2 and CM3
- Guide price
- Typically £395–£875 per post inc VAT; minimum job £405
- Survey
- Free, with a fixed written quote
- Nearby
- Billericay (7.7 mi), Witham (8.5 mi), Maldon (8.8 mi), Wickford (8.9 mi)
Driveway security post prices in Chelmsford
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£595 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £535–£735 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £685–£875 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; +3% for East of England. Guide only — the fixed price follows a survey.
Driveway security posts in Chelmsford: common uses
Around Chelmsford, driveway security posts usually solve one of these:
- Open-plan frontages without gates
- Drives where neighbours or visitors keep parking
- Homes with a high-value car or van parked outside
Consents, ground and services in Chelmsford
In Chelmsford, work on adopted pavements and verges needs consent from Essex County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Many private-land installations in Chelmsford need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Chelmsford before posts go in.
We scan and hand-dig before cutting deep for a telescopic cassette. Domestic drives hide more than people expect.
- In conservation areas or at listed buildings, check with the local planning authority before fitting visible posts.
- Connect any cassette drainage to surface water or a soakaway, not to the foul drain.
From survey to handover
Free home survey
We look at your drive, how and where you park, the surface and what might be under it, such as the water pipe or a gas service. You receive a fixed written quote with the post type and position marked.
Cut the surface
Block paving is lifted carefully for reuse; tarmac, concrete or resin is cut neatly to keep the patch as small as possible.
Make good and show you
The surface is reinstated and cleaned. We show you how to lock, lower and raise the post and hand over the keys.
Finishes and options
| Option | Detail |
|---|---|
| Fold-down posts | Hinged posts bolted down with resin anchors. Quick to fit and no digging, but need a solid base to fix into. |
| Telescopic posts | Retract into a cassette with a flush lid when lowered. Tidy and secure, but need depth and drainage under the drive. |
| Semi-automatic posts | Rise on their own when unlocked and push down to lower. Easier for daily use than lifting a post. |
What affects the quote
Two Chelmsford jobs with the same number of posts can price quite differently. The usual reasons:
- Depth available and services under the drive
- Type of post: telescopic, fold-down, removable or semi-automatic
- Finish and keyed-alike locks
After installation
Keep a spare key somewhere safe away from the car keys. Fold-down posts need the hinge oiled and anchors checked.
For damaged or loose posts in Chelmsford, repairs and replacements are priced in writing first.
Driveway security posts in Chelmsford: FAQs
Can you install driveway security posts anywhere in Chelmsford?
We cover all of Chelmsford (CM1, CM2 and CM3) and the rest of Essex. We also work in Billericay, Witham and Maldon.
Who gives permission for bollards on the pavement in Chelmsford?
Essex County Council is the highway authority covering Chelmsford's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do driveway security posts cost in Chelmsford?
In Chelmsford, typically £395–£875 per post, supplied and installed, including VAT, with a minimum job of £405 plus VAT, using our East of England guide prices. The fixed figure comes in writing after we've seen the site.
Does a driveway post stop keyless car theft?
It cannot stop a thief opening or starting the car electronically, but it stops the car being driven off the drive until the post is unlocked. That makes your car a slower, riskier target. Use it alongside a signal-blocking pouch and the car's own security.
Where should a driveway security post go?
Close enough in front of the car, or between it and the road, that the car cannot be driven round it. We mark the position with your car in place during the survey. Sloping drives and wide frontages may change the obvious spot.
Driveway security posts near Chelmsford
- Billericay (7.7 mi)
- Witham (8.5 mi)
- Maldon (8.8 mi)
- Wickford (8.9 mi)
- Braintree (10.5 mi)
- Brentwood (10.6 mi)