Gloucestershire · England
Driveway security posts for homes in Yate
Driveway security posts supplied and fitted in Yate, Gloucestershire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout driveway security posts in Yate
Across Yate, typical sites for driveway security posts include carports, private parking bays and driveways. Telescopic, fold-down and removable security posts for home driveways, to deter car theft and stop unwanted parking.
We cover Yate's BS37, GL9 and GL12 postcode districts, including places such as Chipping Sodbury, Engine Common, Rangeworthy and Iron Acton. Jobs in Yate can be combined with work in Mangotsfield (5.2 miles), Kingswood (7.2 miles), Bristol (9.7 miles) and Bath (11.7 miles) (straight-line distances). Yate is about 10 miles from Bristol.
Yate at a glance
- Area
- Gloucestershire, England
- Highway authority
- South Gloucestershire Council (local roads)
- Planning authority
- South Gloucestershire Council
- Postcodes
- BS37, GL9 and GL12
- Guide price
- Typically £385–£845 per post inc VAT; minimum job £395
- Survey
- Free, with a fixed written quote
- Nearby
- Mangotsfield (5.2 mi), Kingswood (7.2 mi), Bristol (9.7 mi), Bath (11.7 mi)
What driveway security posts cost in Yate
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£575 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £525–£715 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £665–£845 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Typical driveway security posts jobs in Yate
Around Yate, driveway security posts usually solve one of these:
- Drives where a gate would not fit or is not allowed
- Homes worried about keyless or relay car theft
- Homes with a high-value car or van parked outside
What we check first in Yate
The highway authority for local roads in Yate is South Gloucestershire Council; motorways and trunk roads sit with National Highways. Driveway security posts on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Yate is listed or inside a conservation area, check with the local planning authority (South Gloucestershire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
The water supply pipe, gas service and electric cable all cross the front garden, often at shallow depth and rarely where you would guess, and older drives may cover inspection chambers or soakaways. We scan and hand-dig before cutting deep for a telescopic cassette.
- If the drive is shared or has a right of way over it, agree positions with the neighbour first.
- Connect any cassette drainage to surface water or a soakaway, not to the foul drain.
How the job runs
Free home survey
We look at your drive, how and where you park, the surface and what might be under it, such as the water pipe or a gas service. You receive a fixed written quote with the post type and position marked.
Mark the position
The position is marked with the car in place, so we can check it blocks the car and that you can still open doors and walk past.
Fit the post
Telescopic cassettes and removable sockets are set flush in concrete with drainage beneath. Fold-down posts are anchored to concrete or a small new pad.
Options to consider
| Option | Detail |
|---|---|
| Finishes | Black, grey, yellow or stainless finishes, with reflective bands so visitors see the post at night. |
| Removable posts | Lift out of a shallow socket and lock in place. Simple and low cost to fit, but must be stored when out. |
| Semi-automatic posts | Rise on their own when unlocked and push down to lower. Easier for daily use than lifting a post. |
Pricing driveway security posts in Yate
Two Yate jobs with the same number of posts can price quite differently. The usual reasons:
- Drive surface and how visible a repair will be
- Drainage for telescopic and semi-automatic cassettes
- Number of posts for the cars on the drive
Keeping them working
Fold-down posts need the hinge oiled and anchors checked. If the post becomes stiff, deal with it early, because a post that is awkward to use is a post that stops being locked.
We can also service, repair or replace existing posts anywhere in Yate.
Common questions
Do you install driveway security posts in Yate?
We cover all of Yate (BS37, GL9 and GL12) and the rest of Gloucestershire. We also work in Mangotsfield, Kingswood and Bristol.
Who gives permission for bollards on the pavement in Yate?
South Gloucestershire Council is the highway authority covering Yate's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do driveway security posts cost in Yate?
In Yate, typically £385–£845 per post, supplied and installed, including VAT, with a minimum job of £395 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Which type of post is right for my driveway?
Telescopic if you want a flush, tidy finish and will use it daily, provided the ground can be dug and drained. Fold-down if digging is not possible or the drive is concrete. Removable if the post will only be used occasionally and you have somewhere to store it.
Will fitting a post damage my block paving?
Only a small area is lifted and the original blocks are relaid around the post. Done carefully, the repair is hard to spot. Resin and imprinted drives show patching more.
Driveway security posts in nearby towns
- Mangotsfield (5.2 mi)
- Kingswood (7.2 mi)
- Bristol (9.7 mi)
- Bath (11.7 mi)
- Chippenham (13.8 mi)
- Portishead (15.6 mi)