Bollard Installers

Greater Manchester · England

Driveway security posts for homes in Atherton

Planning driveway security posts in Atherton? We check ownership, consents and buried services first, then quote a fixed price.

Black driveway security post locked upright in front of a parked car on a semi-detached house drivewayComputer-generated image

Atherton driveway security posts

We supply and fit driveway security posts throughout Atherton, typically for sites such as front-garden parking spaces, carports and driveways. The right one depends on the surface, the depth available and how often the post will be used.

We cover every part of Atherton in the M46 postcode district. Jobs in Atherton can be combined with work in Tyldesley (1.3 miles), Leigh (2.2 miles), Westhoughton (2.2 miles) and Hindley (3.7 miles) (straight-line distances). It sits roughly 11 miles from Manchester as the crow flies.

Local details

Area
Greater Manchester, England
Highway authority
Wigan Council (local roads)
Planning authority
Wigan Council
Postcodes
M46
Guide price
Typically £375–£825 per post inc VAT; minimum job £385
Survey
Free, with a fixed written quote
Nearby
Tyldesley (1.3 mi), Leigh (2.2 mi), Westhoughton (2.2 mi), Hindley (3.7 mi)

Where driveway security posts go in around Atherton

Common uses in a place like Atherton:

  • Drives where a gate would not fit or is not allowed
  • Homes worried about keyless or relay car theft
  • Homes with a high-value car or van parked outside

Atherton: typical driveway security post prices

SpecificationGuide priceIncludes
Standard£375–£565 inc VATStandard post, foundation, reinstatement
Upgraded£515–£705 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£645–£825 inc VATHeavy-duty or architectural spec, premium finish

Per post, supplied and installed; -2% for North West. Guide only — the fixed price follows a survey.

Consents, ground and services in Atherton

The highway authority for local roads in Atherton is Wigan Council; motorways and trunk roads sit with National Highways. Driveway security posts on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Wigan Council) first — we flag this at survey.

We scan and hand-dig before cutting deep for a telescopic cassette. Domestic drives hide more than people expect.

  • If the drive is shared or has a right of way over it, agree positions with the neighbour first.
  • Make sure the post is on your own land; a post on the pavement or the dropped kerb needs the highway authority's agreement.

Installation, step by step

Cut the surface

Block paving is lifted carefully for reuse; tarmac, concrete or resin is cut neatly to keep the patch as small as possible.

Fit the post

Telescopic cassettes and removable sockets are set flush in concrete with drainage beneath. Fold-down posts are anchored to concrete or a small new pad.

Make good and show you

The surface is reinstated and cleaned. We show you how to lock, lower and raise the post and hand over the keys.

Options to consider

OptionDetail
Semi-automatic postsRise on their own when unlocked and push down to lower. Easier for daily use than lifting a post.
Removable postsLift out of a shallow socket and lock in place. Simple and low cost to fit, but must be stored when out.
Keyed-alike locksTwo posts or more can be supplied so one key opens both, which helps households with several cars.

What moves the price in Atherton

When we price driveway security posts in Atherton, these make the biggest difference:

  • Drive surface and how visible a repair will be
  • Type of post: telescopic, fold-down, removable or semi-automatic
  • Finish and keyed-alike locks

After installation

Fold-down posts need the hinge oiled and anchors checked. Keep a spare key somewhere safe away from the car keys.

If posts in Atherton are later hit or damaged, we can repair or replace them — see bollard repairs.

Common questions

Can you install driveway security posts anywhere in Atherton?

We cover all of Atherton (M46) and the rest of Greater Manchester. We also work in Tyldesley, Leigh and Westhoughton.

Do I need consent for driveway security posts on a public footway in Atherton?

The highway authority for local roads in Atherton is Wigan Council; motorways and trunk roads sit with National Highways. Driveway security posts on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

How much do driveway security posts cost in Atherton?

In Atherton, typically £375–£825 per post, supplied and installed, including VAT, with a minimum job of £385 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.

Will fitting a post damage my block paving?

Only a small area is lifted and the original blocks are relaid around the post. Done carefully, the repair is hard to spot. Resin and imprinted drives show patching more.

Which type of post is right for my driveway?

Telescopic if you want a flush, tidy finish and will use it daily, provided the ground can be dug and drained. Fold-down if digging is not possible or the drive is concrete. Removable if the post will only be used occasionally and you have somewhere to store it.

Driveway security posts in nearby towns

Other bollard services in Atherton

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote