Greater Manchester · England
Driveway security posts for homes in Hyde
Driveway security posts supplied and fitted in Hyde, Greater Manchester: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageHyde driveway security posts
Whether it's carports, front-garden parking spaces and driveways, driveway security posts in Hyde are planned around who needs to get through and who doesn't. The common types are telescopic posts that retract into the ground, fold-down posts that hinge flat, and removable posts that lift out of a socket.
Coverage in Hyde takes in the SK14 postcode district and nearby places like Hattersley, Mottram in Longdendale, Hollingworth and Broadbottom. Nearby, we also work in Denton (1.6 miles), Dukinfield (1.7 miles), Stalybridge (2.4 miles) and Ashton-under-Lyne (2.7 miles), measured as the crow flies. It sits roughly 6 miles from Oldham as the crow flies.
Hyde at a glance
- Area
- Greater Manchester, England
- Highway authority
- Tameside Council (local roads)
- Planning authority
- Tameside Council
- Postcodes
- SK14
- Guide price
- Typically £375–£825 per post inc VAT; minimum job £385
- Survey
- Free, with a fixed written quote
- Nearby
- Denton (1.6 mi), Dukinfield (1.7 mi), Stalybridge (2.4 mi), Ashton-under-Lyne (2.7 mi)
Typical driveway security posts jobs in Hyde
Typical reasons Hyde sites choose driveway security posts:
- Owners of motorhomes, caravans and trailers
- Drives where a gate would not fit or is not allowed
- Homes worried about keyless or relay car theft
Hyde: typical driveway security post prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £375–£565 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £515–£705 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £645–£825 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; -2% for North West. Guide only — the fixed price follows a survey.
Permissions and groundwork in Hyde
The highway authority for local roads in Hyde is Tameside Council; motorways and trunk roads sit with National Highways. Driveway security posts on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Tameside Council) first — we flag this at survey.
Clay soils hold water, so a telescopic or semi-automatic cassette there needs a proper soakaway or a connection to a surface water drain, never the foul drain. The water supply pipe, gas service and electric cable all cross the front garden, often at shallow depth and rarely where you would guess, and older drives may cover inspection chambers or soakaways.
- In conservation areas or at listed buildings, check with the local planning authority before fitting visible posts.
- Make sure the post is on your own land; a post on the pavement or the dropped kerb needs the highway authority's agreement.
Installation, step by step
Cut the surface
Block paving is lifted carefully for reuse; tarmac, concrete or resin is cut neatly to keep the patch as small as possible.
Fit the post
Telescopic cassettes and removable sockets are set flush in concrete with drainage beneath. Fold-down posts are anchored to concrete or a small new pad.
Make good and show you
The surface is reinstated and cleaned. We show you how to lock, lower and raise the post and hand over the keys.
Specification choices
| Option | Detail |
|---|---|
| Finishes | Black, grey, yellow or stainless finishes, with reflective bands so visitors see the post at night. |
| Removable posts | Lift out of a shallow socket and lock in place. Simple and low cost to fit, but must be stored when out. |
| Semi-automatic posts | Rise on their own when unlocked and push down to lower. Easier for daily use than lifting a post. |
What moves the price in Hyde
When we price driveway security posts in Hyde, these make the biggest difference:
- Type of post: telescopic, fold-down, removable or semi-automatic
- Drainage for telescopic and semi-automatic cassettes
- Drive surface and how visible a repair will be
After installation
With telescopic and semi-automatic posts, lift the lid every few months and check the cassette is not holding water or silt. Keep a spare key somewhere safe away from the car keys.
If posts in Hyde are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about driveway security posts in Hyde
Which parts of Hyde do you cover for driveway security posts?
We cover all of Hyde (SK14) and the rest of Greater Manchester. We also work in Denton, Dukinfield and Stalybridge.
Do I need consent for driveway security posts on a public footway in Hyde?
Tameside Council is the highway authority covering Hyde's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for driveway security posts in Hyde?
In Hyde, typically £375–£825 per post, supplied and installed, including VAT, with a minimum job of £385 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
Do I need two posts for two cars?
Not always. On a narrow drive where one car parks behind the other, one post at the front may be enough. On a wide drive with cars side by side, two posts are usually needed to block both.
Will fitting a post damage my block paving?
Only a small area is lifted and the original blocks are relaid around the post. Done carefully, the repair is hard to spot. Resin and imprinted drives show patching more.
Driveway security posts in nearby towns
- Denton (1.6 mi)
- Dukinfield (1.7 mi)
- Stalybridge (2.4 mi)
- Ashton-under-Lyne (2.7 mi)
- Droylsden (3.4 mi)
- Stockport (4.3 mi)