Bollard Installers

Kent · England

Driveway security posts for homes in Maidstone

Driveway security posts for sites across Maidstone and the rest of Kent, from the first measurement to the last relaid paving block.

Black driveway security post locked upright in front of a parked car on a semi-detached house drivewayComputer-generated image

Driveway security posts in Maidstone

We supply and fit driveway security posts throughout Maidstone, typically for sites such as shared drives, carports and driveways. The right one depends on the surface, the depth available and how often the post will be used.

We work across ME16, ME15, ME14, ME17 and ME18 — Maidstone itself and places including East Farleigh, Otham, Bearsted and Loose. Nearby, we also work in Chatham (7.8 miles), Rochester (8.4 miles), Gillingham (8.6 miles) and Strood (8.9 miles), measured as the crow flies.

Maidstone at a glance

Area
Kent, England
Highway authority
Kent County Council (local roads)
Planning authority
the council for Maidstone
Postcodes
ME16, ME15, ME14, ME17 and ME18
Guide price
Typically £405–£895 per post inc VAT; minimum job £415
Survey
Free, with a fixed written quote
Nearby
Chatham (7.8 mi), Rochester (8.4 mi), Gillingham (8.6 mi), Strood (8.9 mi)

What Maidstone sites use driveway security posts for

Around Maidstone, driveway security posts usually solve one of these:

  • Owners of motorhomes, caravans and trailers
  • Homes worried about keyless or relay car theft
  • Drives where neighbours or visitors keep parking

What driveway security posts cost in Maidstone

SpecificationGuide priceIncludes
Standard£405–£615 inc VATStandard post, foundation, reinstatement
Upgraded£555–£755 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£705–£895 inc VATHeavy-duty or architectural spec, premium finish

Per post, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.

Before we dig in Maidstone

The highway authority for local roads in Maidstone is Kent County Council; motorways and trunk roads sit with National Highways. Driveway security posts on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Maidstone) first — we flag this at survey.

Clay soils hold water, so a telescopic or semi-automatic cassette there needs a proper soakaway or a connection to a surface water drain, never the foul drain. Domestic drives hide more than people expect.

  • In conservation areas or at listed buildings, check with the local planning authority before fitting visible posts.
  • Make sure the post is on your own land; a post on the pavement or the dropped kerb needs the highway authority's agreement.

Installation, step by step

Free home survey

We look at your drive, how and where you park, the surface and what might be under it, such as the water pipe or a gas service. You receive a fixed written quote with the post type and position marked.

Mark the position

The position is marked with the car in place, so we can check it blocks the car and that you can still open doors and walk past.

Fit the post

Telescopic cassettes and removable sockets are set flush in concrete with drainage beneath. Fold-down posts are anchored to concrete or a small new pad.

Choosing the right spec

OptionDetail
Telescopic postsRetract into a cassette with a flush lid when lowered. Tidy and secure, but need depth and drainage under the drive.
Keyed-alike locksTwo posts or more can be supplied so one key opens both, which helps households with several cars.
FinishesBlack, grey, yellow or stainless finishes, with reflective bands so visitors see the post at night.

Pricing driveway security posts in Maidstone

Two Maidstone jobs with the same number of posts can price quite differently. The usual reasons:

  • Finish and keyed-alike locks
  • Number of posts for the cars on the drive
  • Depth available and services under the drive

Looking after them

Keep a spare key somewhere safe away from the car keys. Fold-down posts need the hinge oiled and anchors checked.

For damaged or loose posts in Maidstone, repairs and replacements are priced in writing first.

Driveway security posts in Maidstone: FAQs

Do you install driveway security posts in Maidstone?

We cover all of Maidstone (ME16, ME15, ME14, ME17 and ME18) and the rest of Kent. We also work in Chatham, Rochester and Gillingham.

Who gives permission for bollards on the pavement in Maidstone?

The highway authority for local roads in Maidstone is Kent County Council; motorways and trunk roads sit with National Highways. Driveway security posts on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

How much do driveway security posts cost in Maidstone?

In Maidstone, typically £405–£895 per post, supplied and installed, including VAT, with a minimum job of £415 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.

Does a driveway post stop keyless car theft?

It cannot stop a thief opening or starting the car electronically, but it stops the car being driven off the drive until the post is unlocked. That makes your car a slower, riskier target. Use it alongside a signal-blocking pouch and the car's own security.

What if I lose the key to my driveway post?

Keep the spare somewhere safe. If both are lost, many lock cylinders can be replaced, but sometimes the lock has to be drilled. That is a paid repair visit, so a spare key is worth having.

Driveway security posts near Maidstone

More from us in Maidstone

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote