Bollard Installers

Merseyside · England

Driveway security posts for homes in Wallasey

Local installation of driveway security posts in Wallasey — free survey, fixed written price, and posts set to the right spacing for people and vehicles.

Black driveway security post locked upright in front of a parked car on a semi-detached house drivewayComputer-generated image

About driveway security posts in Wallasey

In the town of Wallasey, driveway security posts tend to go in at driveways, new-build estate drives and carports. The common types are telescopic posts that retract into the ground, fold-down posts that hinge flat, and removable posts that lift out of a socket.

We cover Wallasey's CH45, CH44, CH46 and CH47 postcode districts, including places such as Hoylake and Meols. Nearby, we also work in Birkenhead (2.9 miles), Bootle (3.6 miles), Liverpool (3.7 miles) and Litherland (4.2 miles), measured as the crow flies. Wallasey is about 4 miles from Liverpool.

Wallasey at a glance

Area
Merseyside, England
Highway authority
Wirral Council (local roads)
Planning authority
Wirral Council
Postcodes
CH45, CH44, CH46 and CH47
Guide price
Typically £375–£825 per post inc VAT; minimum job £385
Survey
Free, with a fixed written quote
Nearby
Birkenhead (2.9 mi), Bootle (3.6 mi), Liverpool (3.7 mi), Litherland (4.2 mi)

Driveway security posts in Wallasey: common uses

Around Wallasey, driveway security posts usually solve one of these:

  • Drives where neighbours or visitors keep parking
  • Open-plan frontages without gates
  • Homes worried about keyless or relay car theft

Wallasey: typical driveway security post prices

SpecificationGuide priceIncludes
Standard£375–£565 inc VATStandard post, foundation, reinstatement
Upgraded£515–£705 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£645–£825 inc VATHeavy-duty or architectural spec, premium finish

Per post, supplied and installed; -2% for North West. Guide only — the fixed price follows a survey.

Permissions and groundwork in Wallasey

In Wallasey, work on adopted pavements and verges needs consent from Wirral Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.

Many private-land installations in Wallasey need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Wirral Council before posts go in.

Block paving reinstates well because the original blocks can go back; tarmac, resin-bound and imprinted concrete show patching, so we keep cuts tight and positions sensible. Clay soils hold water, so a telescopic or semi-automatic cassette there needs a proper soakaway or a connection to a surface water drain, never the foul drain.

  • Make sure the post is on your own land; a post on the pavement or the dropped kerb needs the highway authority's agreement.
  • Connect any cassette drainage to surface water or a soakaway, not to the foul drain.

Installation, step by step

Mark the position

The position is marked with the car in place, so we can check it blocks the car and that you can still open doors and walk past.

Cut the surface

Block paving is lifted carefully for reuse; tarmac, concrete or resin is cut neatly to keep the patch as small as possible.

Fit the post

Telescopic cassettes and removable sockets are set flush in concrete with drainage beneath. Fold-down posts are anchored to concrete or a small new pad.

Specification choices

OptionDetail
FinishesBlack, grey, yellow or stainless finishes, with reflective bands so visitors see the post at night.
Semi-automatic postsRise on their own when unlocked and push down to lower. Easier for daily use than lifting a post.
Removable postsLift out of a shallow socket and lock in place. Simple and low cost to fit, but must be stored when out.

What affects the quote

When we price driveway security posts in Wallasey, these make the biggest difference:

  • Drainage for telescopic and semi-automatic cassettes
  • Type of post: telescopic, fold-down, removable or semi-automatic
  • Drive surface and how visible a repair will be

After installation

If the post becomes stiff, deal with it early, because a post that is awkward to use is a post that stops being locked. Keep a spare key somewhere safe away from the car keys.

We can also service, repair or replace existing posts anywhere in Wallasey.

Common questions

Do you install driveway security posts in Wallasey?

We cover all of Wallasey (CH45, CH44, CH46 and CH47) and the rest of Merseyside. We also work in Birkenhead, Bootle and Liverpool.

Who gives permission for bollards on the pavement in Wallasey?

The highway authority for local roads in Wallasey is Wirral Council; motorways and trunk roads sit with National Highways. Driveway security posts on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

What's a typical price for driveway security posts in Wallasey?

In Wallasey, typically £375–£825 per post, supplied and installed, including VAT, with a minimum job of £385 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.

Which type of post is right for my driveway?

Telescopic if you want a flush, tidy finish and will use it daily, provided the ground can be dug and drained. Fold-down if digging is not possible or the drive is concrete. Removable if the post will only be used occasionally and you have somewhere to store it.

Will fitting a post damage my block paving?

Only a small area is lifted and the original blocks are relaid around the post. Done carefully, the repair is hard to spot. Resin and imprinted drives show patching more.

Driveway security posts near Wallasey

Other bollard services in Wallasey

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote