Oxfordshire · England
Driveway security posts for homes in Oxford
Local installation of driveway security posts in Oxford — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout driveway security posts in Oxford
In the city of Oxford, driveway security posts tend to go in at private parking bays, shared drives and new-build estate drives. The right one depends on the surface, the depth available and how often the post will be used.
We cover Oxford's OX1, OX2, OX3 and OX4 postcode districts, including places such as Wolvercote and Sandford-on-Thames. Jobs in Oxford can be combined with work in Abingdon (5.7 miles), Didcot (9.9 miles), Witney (10 miles) and Bicester (11.1 miles) (straight-line distances). Reading is around 24 miles away.
Local details
- Area
- Oxfordshire, England
- Highway authority
- Oxfordshire County Council (local roads)
- Planning authority
- Oxfordshire County Council
- Postcodes
- OX1, OX2, OX3 and OX4
- Guide price
- Typically £405–£895 per post inc VAT; minimum job £415
- Survey
- Free, with a fixed written quote
What driveway security posts cost in Oxford
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £405–£615 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £555–£755 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £705–£895 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
What Oxford sites use driveway security posts for
Around Oxford, driveway security posts usually solve one of these:
- Homes with a high-value car or van parked outside
- Drives where neighbours or visitors keep parking
- Homes worried about keyless or relay car theft
What we check first in Oxford
The highway authority for local roads in Oxford is Oxfordshire County Council; motorways and trunk roads sit with National Highways. Driveway security posts on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Oxfordshire County Council) first — we flag this at survey.
Clay soils hold water, so a telescopic or semi-automatic cassette there needs a proper soakaway or a connection to a surface water drain, never the foul drain. Domestic drives hide more than people expect.
- Connect any cassette drainage to surface water or a soakaway, not to the foul drain.
- Make sure the post is on your own land; a post on the pavement or the dropped kerb needs the highway authority's agreement.
From survey to handover
Cut the surface
Block paving is lifted carefully for reuse; tarmac, concrete or resin is cut neatly to keep the patch as small as possible.
Fit the post
Telescopic cassettes and removable sockets are set flush in concrete with drainage beneath. Fold-down posts are anchored to concrete or a small new pad.
Make good and show you
The surface is reinstated and cleaned. We show you how to lock, lower and raise the post and hand over the keys.
Options to consider
| Option | Detail |
|---|---|
| Semi-automatic posts | Rise on their own when unlocked and push down to lower. Easier for daily use than lifting a post. |
| Telescopic posts | Retract into a cassette with a flush lid when lowered. Tidy and secure, but need depth and drainage under the drive. |
| Removable posts | Lift out of a shallow socket and lock in place. Simple and low cost to fit, but must be stored when out. |
What moves the price in Oxford
When we price driveway security posts in Oxford, these make the biggest difference:
- Depth available and services under the drive
- Drive surface and how visible a repair will be
- Finish and keyed-alike locks
Keeping them working
Keep a spare key somewhere safe away from the car keys. If the post becomes stiff, deal with it early, because a post that is awkward to use is a post that stops being locked.
We can also service, repair or replace existing posts anywhere in Oxford.
Common questions
Which parts of Oxford do you cover for driveway security posts?
We cover all of Oxford (OX1, OX2, OX3 and OX4) and the rest of Oxfordshire. We also work in Abingdon, Didcot and Witney.
Do I need consent for driveway security posts on a public footway in Oxford?
The highway authority for local roads in Oxford is Oxfordshire County Council; motorways and trunk roads sit with National Highways. Driveway security posts on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do driveway security posts cost in Oxford?
In Oxford, typically £405–£895 per post, supplied and installed, including VAT, with a minimum job of £415 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Will fitting a post damage my block paving?
Only a small area is lifted and the original blocks are relaid around the post. Done carefully, the repair is hard to spot. Resin and imprinted drives show patching more.
Where should a driveway security post go?
Close enough in front of the car, or between it and the road, that the car cannot be driven round it. We mark the position with your car in place during the survey. Sloping drives and wide frontages may change the obvious spot.
Driveway security posts near Oxford
- Abingdon (5.7 mi)
- Didcot (9.9 mi)
- Witney (10 mi)
- Bicester (11.1 mi)
- Aylesbury (19.4 mi)
- Banbury (21.8 mi)