Bollard Installers

West Midlands · England

Driveway security posts for homes in Kingswinford

Planning driveway security posts in Kingswinford? We check ownership, consents and buried services first, then quote a fixed price.

Black driveway security post locked upright in front of a parked car on a semi-detached house drivewayComputer-generated image

Driveway security posts in Kingswinford

Across Kingswinford, typical sites for driveway security posts include private parking bays, carports and front-garden parking spaces. The right one depends on the surface, the depth available and how often the post will be used.

We cover Kingswinford's DY6 and DY3 postcode districts, including places such as Hinksford. Nearby, we also work in Brierley Hill (2.3 miles), Stourbridge (3.1 miles), Dudley (3.6 miles) and Tipton (4.8 miles), measured as the crow flies. Kingswinford is about 6 miles from Wolverhampton.

Kingswinford at a glance

Area
West Midlands, England
Highway authority
Dudley Council (local roads)
Planning authority
Dudley Council
Postcodes
DY6 and DY3
Guide price
Typically £385–£845 per post inc VAT; minimum job £395
Survey
Free, with a fixed written quote
Nearby
Brierley Hill (2.3 mi), Stourbridge (3.1 mi), Dudley (3.6 mi), Tipton (4.8 mi)

Guide prices for Kingswinford

SpecificationGuide priceIncludes
Standard£385–£575 inc VATStandard post, foundation, reinstatement
Upgraded£525–£715 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£665–£845 inc VATHeavy-duty or architectural spec, premium finish

Per post, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.

Driveway security posts in Kingswinford: common uses

Around Kingswinford, driveway security posts usually solve one of these:

  • Homes with a high-value car or van parked outside
  • Drives where a gate would not fit or is not allowed
  • Open-plan frontages without gates

What we check first in Kingswinford

Dudley Council is the highway authority covering Kingswinford's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.

Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Dudley Council) first — we flag this at survey.

The water supply pipe, gas service and electric cable all cross the front garden, often at shallow depth and rarely where you would guess, and older drives may cover inspection chambers or soakaways. Clay soils hold water, so a telescopic or semi-automatic cassette there needs a proper soakaway or a connection to a surface water drain, never the foul drain.

  • Connect any cassette drainage to surface water or a soakaway, not to the foul drain.
  • In conservation areas or at listed buildings, check with the local planning authority before fitting visible posts.

From survey to handover

Mark the position

The position is marked with the car in place, so we can check it blocks the car and that you can still open doors and walk past.

Cut the surface

Block paving is lifted carefully for reuse; tarmac, concrete or resin is cut neatly to keep the patch as small as possible.

Make good and show you

The surface is reinstated and cleaned. We show you how to lock, lower and raise the post and hand over the keys.

Options to consider

OptionDetail
Keyed-alike locksTwo posts or more can be supplied so one key opens both, which helps households with several cars.
Fold-down postsHinged posts bolted down with resin anchors. Quick to fit and no digging, but need a solid base to fix into.
FinishesBlack, grey, yellow or stainless finishes, with reflective bands so visitors see the post at night.

What affects the quote

Two Kingswinford jobs with the same number of posts can price quite differently. The usual reasons:

  • Type of post: telescopic, fold-down, removable or semi-automatic
  • Drainage for telescopic and semi-automatic cassettes
  • Finish and keyed-alike locks

Looking after them

If the post becomes stiff, deal with it early, because a post that is awkward to use is a post that stops being locked. With telescopic and semi-automatic posts, lift the lid every few months and check the cassette is not holding water or silt.

We can also service, repair or replace existing posts anywhere in Kingswinford.

Questions about driveway security posts in Kingswinford

Do you install driveway security posts in Kingswinford?

We cover all of Kingswinford (DY6 and DY3) and the rest of West Midlands. We also work in Brierley Hill, Stourbridge and Dudley.

Who gives permission for bollards on the pavement in Kingswinford?

The highway authority for local roads in Kingswinford is Dudley Council; motorways and trunk roads sit with National Highways. Driveway security posts on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

How much do driveway security posts cost in Kingswinford?

In Kingswinford, typically £385–£845 per post, supplied and installed, including VAT, with a minimum job of £395 plus VAT, using our West Midlands guide prices. The fixed figure comes in writing after we've seen the site.

Will fitting a post damage my block paving?

Only a small area is lifted and the original blocks are relaid around the post. Done carefully, the repair is hard to spot. Resin and imprinted drives show patching more.

Where should a driveway security post go?

Close enough in front of the car, or between it and the road, that the car cannot be driven round it. We mark the position with your car in place during the survey. Sloping drives and wide frontages may change the obvious spot.

Driveway security posts near Kingswinford

Other bollard services in Kingswinford

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote