Caerphilly · Wales
Flexible bollard installation in Blackwood
Flexible bollards for sites across Blackwood and the rest of Caerphilly, from the first measurement to the last relaid paving block.
Computer-generated imageFlexible bollards in Blackwood
Polyurethane and spring-based bollards that bend when hit and return upright, for car parks, depots and lane separation. In Blackwood, that tends to mean sites such as community car parks, small industrial units and schools.
We work across NP12 and CF82 — Blackwood itself and places including Pontllanfraith, Oakdale, Pengam and Fleur-de-lis. Nearby, we also work in Bargoed (1.5 miles), Abercarn (3.4 miles), Treharris (4.3 miles) and Abertillery (5.3 miles), measured as the crow flies. It sits roughly 13 miles from Cardiff as the crow flies.
Blackwood at a glance
- Area
- Caerphilly, Wales
- Highway authority
- Caerphilly County Borough Council (local roads)
- Planning authority
- Caerphilly County Borough Council
- Postcodes
- NP12 and CF82
- Guide price
- Typically £185–£575 per bollard + VAT; minimum job £425
- Survey
- Free, with a fixed written quote
- Nearby
- Bargoed (1.5 mi), Abercarn (3.4 mi), Treharris (4.3 mi), Abertillery (5.3 mi)
Where flexible bollards go in around Blackwood
Common uses in a place like Blackwood:
- Temporary or trial layouts before permanent kerbs
- Depot and yard routes where vehicles knock posts daily
- Lane separation at car park entrances and exits
Flexible bollard prices in Blackwood
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£355 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £305–£465 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £425–£575 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; -3% for Wales. Guide only — the fixed price follows a survey.
Before we dig in Blackwood
Before digging near the kerb in Blackwood we establish who owns the ground: adopted footways are Caerphilly County Borough Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
If your site in Blackwood is listed or inside a conservation area, check with the local planning authority (Caerphilly County Borough Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
On tarmac, a small concrete pad or a socket base cast in concrete is the reliable option. Where posts go in a line across a drainage fall, positions avoid channels and gullies.
- Keep pedestrian gaps and routes clear, referring to Inclusive Mobility guidance where people walk through the line.
- Check drilling into car park decks or podium slabs with the building owner before fixing.
What happens on site
Survey traffic movements
The free site survey looks at vehicle sizes, turning paths and where drivers currently clip posts or kerbs. You receive a fixed written quote with post type and fixing.
Set out the line
Posts are set out to guide vehicles along the intended path, with spacing that reads as a line to drivers.
Fit posts and test
Posts are fitted and bent by hand to confirm they return upright, and reflective sleeves are applied.
Specification choices
| Option | Detail |
|---|---|
| Sprung-base bollards | A rigid post on a heavy spring or elastomer base that tilts and returns. Looks like a conventional bollard. |
| Polyurethane posts | Flex along their length and return to shape. Gentle on vehicles and common in car parks and on forecourts. |
| Low-profile deck bases | Shallow fixings for multi-storey decks where deep drilling is not permitted. |
What moves the price in Blackwood
Our Wales guide prices are a starting point; the survey in Blackwood firms them up. What tends to move them:
- Polymer posts or sprung-base bollards
- Bolt-down or socket base
- Out-of-hours working in busy car parks
Looking after them
After resurfacing or line repainting, check that the bases were not disturbed or painted over, and that posts still line up with the new markings. Keep a few spare posts on site where knocks are frequent, so a damaged one can be swapped before the line develops a gap.
We can also service, repair or replace existing posts anywhere in Blackwood.
Common questions
Can you install flexible bollards anywhere in Blackwood?
We cover all of Blackwood (NP12 and CF82) and the rest of Caerphilly. We also work in Bargoed, Abercarn and Treharris.
Who gives permission for bollards on the pavement in Blackwood?
Local roads and pavements in Blackwood are the responsibility of Caerphilly County Borough Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
What's a typical price for flexible bollards in Blackwood?
In Blackwood, typically £185–£575 per bollard, supplied and fixed, plus VAT, with a minimum job of £425 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Do flexible bollards damage vehicles?
Typically very little in a low-speed knock, which is a large part of their appeal. They may leave a scuff on paintwork. A rigid post in the same position would usually dent the vehicle and bend itself.
Can a damaged flexible post be replaced on the same base?
Usually, yes, especially with socket bases designed for it. The post is removed and a new one fitted. If the base itself is damaged or loose, it is re-fixed or replaced at the same time.
Flexible bollards near Blackwood
- Bargoed (1.5 mi)
- Abercarn (3.4 mi)
- Treharris (4.3 mi)
- Abertillery (5.3 mi)
- Risca (6.2 mi)
- Caerphilly (6.5 mi)