Lancashire · England
Flexible bollard installation in Colne
Flexible bollards supplied and fitted in Colne, Lancashire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageFlexible bollards in Colne
We supply and fit flexible bollards throughout Colne, typically for sites such as small industrial units, filling-station forecourts and local parades. Polyurethane and spring-based bollards that bend when hit and return upright, for car parks, depots and lane separation.
We cover Colne's BB8 and BB18 postcode districts, including places such as Trawden, Foulridge, Hey and Winewall. Nearby, we also work in Nelson (2.1 miles), Burnley (4.8 miles), Accrington (10.5 miles) and Keighley (10.7 miles), measured as the crow flies. Bradford is around 18 miles away.
Colne at a glance
- Area
- Lancashire, England
- Highway authority
- Lancashire County Council (local roads)
- Planning authority
- the council for Pendle
- Postcodes
- BB8 and BB18
- Guide price
- Typically £195–£585 per bollard + VAT; minimum job £435
- Survey
- Free, with a fixed written quote
- Nearby
- Nelson (2.1 mi), Burnley (4.8 mi), Accrington (10.5 mi), Keighley (10.7 mi)
Flexible bollard prices in Colne
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £195–£355 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £305–£475 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £425–£585 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; -2% for North West. Guide only — the fixed price follows a survey.
What Colne sites use flexible bollards for
Typical reasons Colne sites choose flexible bollards:
- Lane separation at car park entrances and exits
- Temporary or trial layouts before permanent kerbs
- Depot and yard routes where vehicles knock posts daily
Permissions and groundwork in Colne
In Colne, work on adopted pavements and verges needs consent from Lancashire County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Colne is listed or inside a conservation area, check with the local planning authority (the council for Pendle) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
On tarmac, a small concrete pad or a socket base cast in concrete is the reliable option. Anchors therefore need sound concrete with enough edge distance; anchoring into thin, cracked or weak surfaces means the base works loose within weeks.
- Do not use flexible bollards where a physical barrier is needed to protect people or buildings; they guide rather than stop.
- Keep pedestrian gaps and routes clear, referring to Inclusive Mobility guidance where people walk through the line.
How the job runs
Survey traffic movements
The free site survey looks at vehicle sizes, turning paths and where drivers currently clip posts or kerbs. You receive a fixed written quote with post type and fixing.
Check the surface
Slabs and decks are checked for thickness, reinforcement and waterproofing before drilling. Weak tarmac may need a concrete pad or socket base.
Fit posts and test
Posts are fitted and bent by hand to confirm they return upright, and reflective sleeves are applied.
Specification choices
| Option | Detail |
|---|---|
| Low-profile deck bases | Shallow fixings for multi-storey decks where deep drilling is not permitted. |
| Polyurethane posts | Flex along their length and return to shape. Gentle on vehicles and common in car parks and on forecourts. |
| Bolt-down or socket bases | Bolt-down for existing slabs; socket bases allow posts to be replaced without new fixings. |
What affects the quote
When we price flexible bollards in Colne, these make the biggest difference:
- Bolt-down or socket base
- Deck scanning and restrictions on drilling
- Out-of-hours working in busy car parks
Looking after them
Posts exposed to strong sunlight slowly lose flexibility and colour, and eventually crack; replacing the post on its existing base is usually quick. Keep a few spare posts on site where knocks are frequent, so a damaged one can be swapped before the line develops a gap.
If posts in Colne are later hit or damaged, we can repair or replace them — see bollard repairs.
Flexible bollards in Colne: FAQs
Which parts of Colne do you cover for flexible bollards?
We cover all of Colne (BB8 and BB18) and the rest of Lancashire. We also work in Nelson, Burnley and Accrington.
Do I need consent for flexible bollards on a public footway in Colne?
In Colne, work on adopted pavements and verges needs consent from Lancashire County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do flexible bollards cost in Colne?
In Colne, typically £195–£585 per bollard, supplied and fixed, plus VAT, with a minimum job of £435 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
Can a damaged flexible post be replaced on the same base?
Usually, yes, especially with socket bases designed for it. The post is removed and a new one fitted. If the base itself is damaged or loose, it is re-fixed or replaced at the same time.
Do flexible bollards damage vehicles?
Typically very little in a low-speed knock, which is a large part of their appeal. They may leave a scuff on paintwork. A rigid post in the same position would usually dent the vehicle and bend itself.
Flexible bollards near Colne
- Nelson (2.1 mi)
- Burnley (4.8 mi)
- Accrington (10.5 mi)
- Keighley (10.7 mi)
- Rawtenstall (11.8 mi)
- Blackburn (14.8 mi)