Lincolnshire · England
Flexible bollard installation in Cleethorpes
Flexible bollards for sites across Cleethorpes and the rest of Lincolnshire, from the first measurement to the last relaid paving block.
Computer-generated imageCleethorpes flexible bollards
Flexible bollards are traffic management products, not barriers, and will not stop a vehicle that is driven at them. In Cleethorpes, that tends to mean sites such as high street shopfronts, local parades and filling-station forecourts.
We cover Cleethorpes's DN35 postcode district, including places such as Humberston. Nearby, we also work in Grimsby (1.8 miles), measured as the crow flies.
Local details
- Area
- Lincolnshire, England
- Highway authority
- North East Lincolnshire Council (local roads)
- Planning authority
- North East Lincolnshire Council
- Postcodes
- DN35
- Guide price
- Typically £185–£575 per bollard + VAT; minimum job £425
- Survey
- Free, with a fixed written quote
- Nearby
- Grimsby (1.8 mi)
What Cleethorpes sites use flexible bollards for
Common uses in a place like Cleethorpes:
- Bus stations and coach parks
- Drive-thru lanes and fuel forecourts
- Depot and yard routes where vehicles knock posts daily
Flexible bollard prices in Cleethorpes
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£355 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £305–£465 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £425–£575 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; -3% for Yorkshire and the Humber. Guide only — the fixed price follows a survey.
Permissions and groundwork in Cleethorpes
North East Lincolnshire Council is the highway authority covering Cleethorpes's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (North East Lincolnshire Council) first — we flag this at survey.
Flexible bollards put repeated load on their fixings, because every knock rocks the base. Multi-storey and rooftop decks are a special case: slabs may be post-tensioned or carry waterproofing and heating, so drilling depth and positions are agreed with the building owner and scanned first.
- Check drilling into car park decks or podium slabs with the building owner before fixing.
- On public highway, including cycle lane segregation, the highway authority's agreement and specification are needed.
What happens on site
Survey traffic movements
The free site survey looks at vehicle sizes, turning paths and where drivers currently clip posts or kerbs. You receive a fixed written quote with post type and fixing.
Fix the bases
Holes are drilled and cleaned, resin anchors or bolts are set and the bases fixed and torqued once cured. Socket bases are set flush in concrete.
Hand over spares and records
Post and base details are recorded so replacements match, and spare posts can be left on site for busy locations. Staff are shown how a post is swapped on its base.
Choosing the right spec
| Option | Detail |
|---|---|
| Sprung-base bollards | A rigid post on a heavy spring or elastomer base that tilts and returns. Looks like a conventional bollard. |
| Low-profile deck bases | Shallow fixings for multi-storey decks where deep drilling is not permitted. |
| Bolt-down or socket bases | Bolt-down for existing slabs; socket bases allow posts to be replaced without new fixings. |
Pricing flexible bollards in Cleethorpes
Our Yorkshire and the Humber guide prices are a starting point; the survey in Cleethorpes firms them up. What tends to move them:
- Polymer posts or sprung-base bollards
- Number of posts and length of line
- Out-of-hours working in busy car parks
After installation
Check flexible bollards for splits, permanent bends and loose bases, and tighten or replace fixings that have worked loose. Keep a few spare posts on site where knocks are frequent, so a damaged one can be swapped before the line develops a gap.
We can also service, repair or replace existing posts anywhere in Cleethorpes.
Flexible bollards in Cleethorpes: FAQs
Do you install flexible bollards in Cleethorpes?
We cover all of Cleethorpes (DN35) and the rest of Lincolnshire. We also work in Grimsby.
Who gives permission for bollards on the pavement in Cleethorpes?
The highway authority for local roads in Cleethorpes is North East Lincolnshire Council; motorways and trunk roads sit with National Highways. Flexible bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for flexible bollards in Cleethorpes?
In Cleethorpes, typically £185–£575 per bollard, supplied and fixed, plus VAT, with a minimum job of £425 plus VAT, using our Yorkshire and the Humber guide prices. The fixed figure comes in writing after we've seen the site.
Can flexible bollards go in a multi-storey car park?
Yes, often with low-profile bases. The deck has to be checked first, as some slabs contain tendons or waterproofing that must not be drilled. The building owner usually needs to agree the fixing method.
Do flexible bollards damage vehicles?
Typically very little in a low-speed knock, which is a large part of their appeal. They may leave a scuff on paintwork. A rigid post in the same position would usually dent the vehicle and bend itself.