Renfrewshire · Scotland
Flexible bollard installation in Paisley
Flexible bollards supplied and fitted in Paisley, Renfrewshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imagePaisley flexible bollards
We supply and fit flexible bollards throughout Paisley, typically for sites such as leisure centres, business parks and industrial estates. Flexible bollards are traffic management products, not barriers, and will not stop a vehicle that is driven at them.
Coverage in Paisley takes in the PA2, PA1 and PA3 postcode districts. Jobs in Paisley can be combined with work in Barrhead (2.7 miles), Johnstone (3.2 miles), Renfrew (3.2 miles) and Erskine (4.8 miles) (straight-line distances). Paisley is about 7 miles from Glasgow.
Local details
- Area
- Renfrewshire, Scotland
- Roads authority
- Renfrewshire Council (local roads)
- Planning authority
- Renfrewshire Council
- Postcodes
- PA2, PA1 and PA3
- Guide price
- Typically £195–£595 per bollard + VAT; minimum job £445
- Survey
- Free, with a fixed written quote
Paisley: typical flexible bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £195–£365 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £315–£485 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £435–£595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; no regional adjustment. Guide only — the fixed price follows a survey.
Where flexible bollards go in around Paisley
Typical reasons Paisley sites choose flexible bollards:
- Lane separation at car park entrances and exits
- Temporary or trial layouts before permanent kerbs
- Drive-thru lanes and fuel forecourts
Before we dig in Paisley
In Scotland the council is the roads authority for local roads, which in Paisley means Renfrewshire Council. Flexible bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Renfrewshire Council can confirm before anything is ordered.
Flexible bollards put repeated load on their fixings, because every knock rocks the base. Where posts go in a line across a drainage fall, positions avoid channels and gullies.
- Keep pedestrian gaps and routes clear, referring to Inclusive Mobility guidance where people walk through the line.
- Check drilling into car park decks or podium slabs with the building owner before fixing.
Installation, step by step
Check the surface
Slabs and decks are checked for thickness, reinforcement and waterproofing before drilling. Weak tarmac may need a concrete pad or socket base.
Fix the bases
Holes are drilled and cleaned, resin anchors or bolts are set and the bases fixed and torqued once cured. Socket bases are set flush in concrete.
Hand over spares and records
Post and base details are recorded so replacements match, and spare posts can be left on site for busy locations. Staff are shown how a post is swapped on its base.
Choosing the right spec
| Option | Detail |
|---|---|
| Polyurethane posts | Flex along their length and return to shape. Gentle on vehicles and common in car parks and on forecourts. |
| Low-profile deck bases | Shallow fixings for multi-storey decks where deep drilling is not permitted. |
| Bolt-down or socket bases | Bolt-down for existing slabs; socket bases allow posts to be replaced without new fixings. |
Pricing flexible bollards in Paisley
Two Paisley jobs with the same number of posts can price quite differently. The usual reasons:
- Deck scanning and restrictions on drilling
- Polymer posts or sprung-base bollards
- Bolt-down or socket base
After installation
Check flexible bollards for splits, permanent bends and loose bases, and tighten or replace fixings that have worked loose. Posts exposed to strong sunlight slowly lose flexibility and colour, and eventually crack; replacing the post on its existing base is usually quick.
We can also service, repair or replace existing posts anywhere in Paisley.
Common questions
Which parts of Paisley do you cover for flexible bollards?
We cover all of Paisley (PA2, PA1 and PA3) and the rest of Renfrewshire. We also work in Barrhead, Johnstone and Renfrew.
Who gives permission for bollards on the pavement in Paisley?
For anything on the public footway in Paisley we check with the roads authority first — Renfrewshire Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
What's a typical price for flexible bollards in Paisley?
In Paisley, typically £195–£595 per bollard, supplied and fixed, plus VAT, with a minimum job of £445 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
How many times can a flexible bollard be hit?
Many times in normal use, as long as the impacts are the low-speed bumps it is designed for. A heavy vehicle running right over it, or a high-speed strike, can tear it. Manufacturers give guidance for their products.
Will a flexible bollard stop a car?
No. It is designed to bend and recover, so a car can push past it. It marks the line and discourages drivers from crossing it. Where a vehicle must be physically stopped, use a rigid bollard.
Flexible bollards near Paisley
- Barrhead (2.7 mi)
- Johnstone (3.2 mi)
- Renfrew (3.2 mi)
- Erskine (4.8 mi)
- Clydebank (4.9 mi)
- Newton Mearns (5.6 mi)