Surrey · England
Flexible bollard installation in Epsom
Flexible bollards supplied and fitted in Epsom, Surrey: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageFlexible bollards in Epsom
Across Epsom, typical sites for flexible bollards include schools, community buildings and high street shopfronts. Flexible bollards are traffic management products, not barriers, and will not stop a vehicle that is driven at them.
We cover Epsom's KT18 and KT19 postcode districts, including places such as Langley Vale and Worcester Park. Nearby, we also work in Ewell (1.6 miles), Banstead (2.8 miles), Kingston upon Thames (3.5 miles) and Leatherhead (3.6 miles), measured as the crow flies. Reading is around 31 miles away.
Local details
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Epsom and Ewell
- Postcodes
- KT18 and KT19
- Guide price
- Typically £205–£635 per bollard + VAT; minimum job £465
- Survey
- Free, with a fixed written quote
- Nearby
- Ewell (1.6 mi), Banstead (2.8 mi), Kingston upon Thames (3.5 mi), Leatherhead (3.6 mi)
Flexible bollards in Epsom: common uses
Common uses in a place like Epsom:
- Lane separation at car park entrances and exits
- Marking pedestrian routes inside multi-storey car parks
- Bus stations and coach parks
Guide prices for Epsom
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £205–£385 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £335–£515 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £465–£635 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; +6% for South East. Guide only — the fixed price follows a survey.
Permissions and groundwork in Epsom
In Epsom, work on adopted pavements and verges needs consent from Surrey County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Many private-land installations in Epsom need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Epsom and Ewell before posts go in.
On tarmac, a small concrete pad or a socket base cast in concrete is the reliable option. Flexible bollards put repeated load on their fixings, because every knock rocks the base.
- Check drilling into car park decks or podium slabs with the building owner before fixing.
- On public highway, including cycle lane segregation, the highway authority's agreement and specification are needed.
Installation, step by step
Survey traffic movements
The free site survey looks at vehicle sizes, turning paths and where drivers currently clip posts or kerbs. You receive a fixed written quote with post type and fixing.
Fix the bases
Holes are drilled and cleaned, resin anchors or bolts are set and the bases fixed and torqued once cured. Socket bases are set flush in concrete.
Fit posts and test
Posts are fitted and bent by hand to confirm they return upright, and reflective sleeves are applied.
Specification choices
| Option | Detail |
|---|---|
| Bolt-down or socket bases | Bolt-down for existing slabs; socket bases allow posts to be replaced without new fixings. |
| Low-profile deck bases | Shallow fixings for multi-storey decks where deep drilling is not permitted. |
| Sprung-base bollards | A rigid post on a heavy spring or elastomer base that tilts and returns. Looks like a conventional bollard. |
Pricing flexible bollards in Epsom
Two Epsom jobs with the same number of posts can price quite differently. The usual reasons:
- Surface condition and need for concrete pads
- Polymer posts or sprung-base bollards
- Number of posts and length of line
Looking after them
After resurfacing or line repainting, check that the bases were not disturbed or painted over, and that posts still line up with the new markings. Keep a few spare posts on site where knocks are frequent, so a damaged one can be swapped before the line develops a gap.
We can also service, repair or replace existing posts anywhere in Epsom.
Flexible bollards in Epsom: FAQs
Do you install flexible bollards in Epsom?
We cover all of Epsom (KT18 and KT19) and the rest of Surrey. We also work in Ewell, Banstead and Kingston upon Thames.
Who gives permission for bollards on the pavement in Epsom?
In Epsom, work on adopted pavements and verges needs consent from Surrey County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do flexible bollards cost in Epsom?
In Epsom, typically £205–£635 per bollard, supplied and fixed, plus VAT, with a minimum job of £465 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Do flexible bollards damage vehicles?
Typically very little in a low-speed knock, which is a large part of their appeal. They may leave a scuff on paintwork. A rigid post in the same position would usually dent the vehicle and bend itself.
Can flexible bollards go in a multi-storey car park?
Yes, often with low-profile bases. The deck has to be checked first, as some slabs contain tendons or waterproofing that must not be drilled. The building owner usually needs to agree the fixing method.
Flexible bollards in nearby towns
- Ewell (1.6 mi)
- Banstead (2.8 mi)
- Kingston upon Thames (3.5 mi)
- Leatherhead (3.6 mi)
- Sutton (4.6 mi)
- Esher (5 mi)