Bollard Installers

England · 13 towns

Flexible bollard installation in Tyne and Wear

Flexible bollards for sites across Tyne and Wear: surveyed, quoted in writing and installed by our crews.

Yellow flexible polyurethane bollards with white reflective bands along a driving aisle in a multi-storey car parkComputer-generated image

Flexible bollards in Tyne and Wear

Polyurethane and spring-based bollards that bend when hit and return upright, for car parks, depots and lane separation. We cover Tyne and Wear — Newcastle upon Tyne, Sunderland, South Shields, Gateshead and Washington and more.

Highway authorities for local roads in Tyne and Wear: Gateshead Council, Newcastle City Council, North Tyneside Council, South Tyneside Council and Sunderland City Council.

Choose your town in Tyne and Wear

Guide prices in Tyne and Wear

SpecificationGuide priceIncludes
Standard£185–£345 + VATStandard post, foundation, reinstatement
Upgraded£305–£465 + VATUpgraded finish or fittings, reflective band, matched keys
Premium£415–£575 + VATHeavy-duty or architectural spec, premium finish

Per bollard, supplied and fixed; -4% for North East. Guide only — the fixed price follows a survey.

Highway and planning authorities in Tyne and Wear

TownHighway / roads authorityPlanning authority
Newcastle upon TyneNewcastle City Councilthe council for Newcastle upon Tyne
SunderlandSunderland City CouncilSunderland City Council
South ShieldsSouth Tyneside CouncilSouth Tyneside Council
GatesheadGateshead CouncilGateshead Council
WashingtonSunderland City CouncilSunderland City Council
TynemouthNorth Tyneside CouncilNorth Tyneside Council
WallsendNorth Tyneside CouncilNorth Tyneside Council
North ShieldsNorth Tyneside CouncilNorth Tyneside Council
Whitley BayNorth Tyneside CouncilNorth Tyneside Council
Houghton-le-SpringSunderland City CouncilSunderland City Council
FellingGateshead CouncilGateshead Council
JarrowSouth Tyneside CouncilSouth Tyneside Council
HebburnSouth Tyneside CouncilSouth Tyneside Council

Rules for flexible bollards in England

Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.

Details and sources: bollard rules in England.

How installation works

Check the surface

Slabs and decks are checked for thickness, reinforcement and waterproofing before drilling. Weak tarmac may need a concrete pad or socket base.

Fix the bases

Holes are drilled and cleaned, resin anchors or bolts are set and the bases fixed and torqued once cured. Socket bases are set flush in concrete.

Fit posts and test

Posts are fitted and bent by hand to confirm they return upright, and reflective sleeves are applied.

Hand over spares and records

Post and base details are recorded so replacements match, and spare posts can be left on site for busy locations. Staff are shown how a post is swapped on its base.

Flexible bollards in Tyne and Wear: FAQs

Do you cover all of Tyne and Wear for flexible bollards?

Yes — including Newcastle upon Tyne, Sunderland, South Shields, Gateshead, Washington, Tynemouth, Wallsend and North Shields. Enter your postcode in the price calculator to confirm.

How much do flexible bollards cost in Tyne and Wear?

In Tyne and Wear, typically £185–£575 per bollard, supplied and fixed, plus VAT, with a minimum job of £425 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.

Who do I ask about bollards on public land in Tyne and Wear?

For local roads, Gateshead Council, Newcastle City Council, North Tyneside Council, South Tyneside Council and Sunderland City Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.

Do flexible bollards damage vehicles?

Typically very little in a low-speed knock, which is a large part of their appeal. They may leave a scuff on paintwork. A rigid post in the same position would usually dent the vehicle and bend itself.

Can a damaged flexible post be replaced on the same base?

Usually, yes, especially with socket bases designed for it. The post is removed and a new one fitted. If the base itself is damaged or loose, it is re-fixed or replaced at the same time.

Other services in Tyne and Wear

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote