Vale of Glamorgan · Wales
Flexible bollard installation in Barry
Flexible bollards supplied and fitted in Barry, Vale of Glamorgan: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout flexible bollards in Barry
We supply and fit flexible bollards throughout Barry, typically for sites such as filling-station forecourts, small industrial units and schools. Polyurethane and spring-based bollards that bend when hit and return upright, for car parks, depots and lane separation.
Coverage in Barry takes in the CF62 and CF63 postcode districts and nearby places like Eglwys-Brewis and East Aberthaw. We also cover neighbouring Penarth (5.5 miles), Cardiff (7.1 miles), Llantwit Major (8.8 miles) and Llantrisant (10.5 miles) — distances are straight-line. It sits roughly 7 miles from Cardiff as the crow flies.
Key facts for this area
- Area
- Vale of Glamorgan, Wales
- Highway authority
- Vale of Glamorgan Council (local roads)
- Planning authority
- Vale of Glamorgan Council
- Postcodes
- CF62 and CF63
- Guide price
- Typically £185–£575 per bollard + VAT; minimum job £425
- Survey
- Free, with a fixed written quote
- Nearby
- Penarth (5.5 mi), Cardiff (7.1 mi), Llantwit Major (8.8 mi), Llantrisant (10.5 mi)
Guide prices for Barry
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£355 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £305–£465 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £425–£575 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; -3% for Wales. Guide only — the fixed price follows a survey.
Where flexible bollards go in around Barry
Typical reasons Barry sites choose flexible bollards:
- Temporary or trial layouts before permanent kerbs
- Lane separation at car park entrances and exits
- Drive-thru lanes and fuel forecourts
Consents, ground and services in Barry
Before digging near the kerb in Barry we establish who owns the ground: adopted footways are Vale of Glamorgan Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
If your site in Barry is listed or inside a conservation area, check with the local planning authority (Vale of Glamorgan Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Multi-storey and rooftop decks are a special case: slabs may be post-tensioned or carry waterproofing and heating, so drilling depth and positions are agreed with the building owner and scanned first. Flexible bollards put repeated load on their fixings, because every knock rocks the base.
- Check drilling into car park decks or podium slabs with the building owner before fixing.
- On public highway, including cycle lane segregation, the highway authority's agreement and specification are needed.
From survey to handover
Survey traffic movements
The free site survey looks at vehicle sizes, turning paths and where drivers currently clip posts or kerbs. You receive a fixed written quote with post type and fixing.
Set out the line
Posts are set out to guide vehicles along the intended path, with spacing that reads as a line to drivers.
Fit posts and test
Posts are fitted and bent by hand to confirm they return upright, and reflective sleeves are applied.
Options to consider
| Option | Detail |
|---|---|
| Heights and diameters | Commonly 750–1,000 mm high and around 80–200 mm diameter, with slimmer wand-style posts for lane lines. |
| Low-profile deck bases | Shallow fixings for multi-storey decks where deep drilling is not permitted. |
| Sprung-base bollards | A rigid post on a heavy spring or elastomer base that tilts and returns. Looks like a conventional bollard. |
Pricing flexible bollards in Barry
Our Wales guide prices are a starting point; the survey in Barry firms them up. What tends to move them:
- Polymer posts or sprung-base bollards
- Deck scanning and restrictions on drilling
- Number of posts and length of line
After installation
After resurfacing or line repainting, check that the bases were not disturbed or painted over, and that posts still line up with the new markings. Clean reflective sleeves so they stay visible, and replace them when they fade or peel.
We can also service, repair or replace existing posts anywhere in Barry.
Flexible bollards in Barry: FAQs
Can you install flexible bollards anywhere in Barry?
We cover all of Barry (CF62 and CF63) and the rest of Vale of Glamorgan. We also work in Penarth, Cardiff and Llantwit Major.
Do I need consent for flexible bollards on a public footway in Barry?
Local roads and pavements in Barry are the responsibility of Vale of Glamorgan Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
What's a typical price for flexible bollards in Barry?
In Barry, typically £185–£575 per bollard, supplied and fixed, plus VAT, with a minimum job of £425 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
How many times can a flexible bollard be hit?
Many times in normal use, as long as the impacts are the low-speed bumps it is designed for. A heavy vehicle running right over it, or a high-speed strike, can tear it. Manufacturers give guidance for their products.
Can flexible bollards go in a multi-storey car park?
Yes, often with low-profile bases. The deck has to be checked first, as some slabs contain tendons or waterproofing that must not be drilled. The building owner usually needs to agree the fixing method.
Flexible bollards near Barry
- Penarth (5.5 mi)
- Cardiff (7.1 mi)
- Llantwit Major (8.8 mi)
- Llantrisant (10.5 mi)
- Thornhill (10.6 mi)
- Caerphilly (12.4 mi)