Aberdeen City · Scotland
Lighting bollard installation in Aberdeen
Local installation of lighting bollards in Aberdeen — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAberdeen lighting bollards
We supply and fit lighting bollards throughout Aberdeen, typically for sites such as office forecourts, university campuses and multi-storey car parks. Outdoor lighting bollards need weatherproof and impact-resistant construction and must be connected and tested by a qualified electrician.
We cover the AB11, AB25, AB10, AB24, AB16 and AB15 postcode districts in Aberdeen. Jobs in Aberdeen can be combined with work in Cove (3.1 miles), Westhill (6.8 miles), Stonehaven (13.2 miles) and Inverurie (14.3 miles) (straight-line distances).
Aberdeen at a glance
- Area
- Aberdeen City, Scotland
- Roads authority
- Aberdeen City Council (local roads)
- Planning authority
- Aberdeen City Council
- Postcodes
- AB11, AB25, AB10, AB24, AB16, AB15, AB12 and AB22
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £845
- Survey
- Free, with a fixed written quote
- Nearby
- Cove (3.1 mi), Westhill (6.8 mi), Stonehaven (13.2 mi), Inverurie (14.3 mi)
Where lighting bollards go in around Aberdeen
Common uses in a place like Aberdeen:
- Car park walkways and pedestrian crossings
- Hotel, restaurant and pub frontages
- Parks and areas where tall columns would be intrusive
Guide prices for Aberdeen
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Aberdeen
In Scotland the council is the roads authority for local roads, which in Aberdeen means Aberdeen City Council. Lighting bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Aberdeen City Council can confirm before anything is ordered.
Cable is protected by armour or duct, buried deep enough to avoid garden tools and future paving works, and marked with warning tape. Cable trenches run between every position and back to the supply, often crossing paths, drives and planting, so the routes are planned to minimise cuts through hard surfaces and to avoid existing gas, water and telecoms services.
- In homes, new outdoor circuits are often notifiable building work; a registered electrician can usually self-certify it.
- Choose IP and IK ratings that suit the location, and do not rely on lighting bollards as vehicle barriers.
What happens on site
Survey and lighting layout
A free site survey looks at the routes to be lit, where power can come from, surfaces and buried services. Bollard spacing is set from the product's light data, and you receive a fixed written quote.
Set the bases
Anchor cages or foundations are cast at each position with the cable entry in the right place, set level so each bollard stands plumb.
Reinstate
Trenches are backfilled and surfaces made good, whether paving, tarmac, gravel or turf.
Choosing the right spec
| Option | Detail |
|---|---|
| Fixings | Anchor cages cast in concrete, base plates on existing slabs, or ground spikes for garden models. |
| Solar bollards | Self-contained with panel and battery; no cabling. Suited to markers and low-use routes where lower output is acceptable. |
| Light distribution | 360-degree, asymmetric or louvred heads to light paths while limiting glare and light spill. |
What affects the quote
When we price lighting bollards in Aberdeen, these make the biggest difference:
- Mains or solar bollards
- Controls such as photocells, timers or sensors
- Number of bollards and their specification
After installation
If a run of bollards trips the circuit after rain, water ingress at a connection is the usual cause and needs an electrician. LED lighting bollards need far less maintenance than older lamp types, but they are not maintenance-free.
If posts in Aberdeen are later hit or damaged, we can repair or replace them — see bollard repairs.
Lighting bollards in Aberdeen: FAQs
Can you install lighting bollards anywhere in Aberdeen?
We cover all of Aberdeen (AB11, AB25, AB10, AB24, AB16 and AB15) and the rest of Aberdeen City. We also work in Cove, Westhill and Stonehaven.
Do I need consent for lighting bollards on a public footway in Aberdeen?
For anything on the public footway in Aberdeen we check with the roads authority first — Aberdeen City Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
What's a typical price for lighting bollards in Aberdeen?
In Aberdeen, typically £345–£1,195 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £845 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
How far apart should lighting bollards be?
That depends on the light output, beam pattern and how evenly the path needs to be lit. Spacing is worked out from the product's light data rather than a fixed distance. Too far apart leaves dark patches between pools of light.
Can bollard lights work on a timer or motion sensor?
Yes. Photocells switch them on at dusk, timers switch them off or dim them late at night and motion sensors bring them up when someone approaches. Combining controls saves energy and reduces light pollution.