Argyll and Bute · Scotland
Lighting bollard installation in Dunoon
Lighting bollards for sites across Dunoon and the rest of Argyll and Bute, from the first measurement to the last relaid paving block.
Computer-generated imageDunoon lighting bollards
Whether it's high street shopfronts, community car parks and local parades, lighting bollards in Dunoon are planned around who needs to get through and who doesn't. Outdoor lighting bollards need weatherproof and impact-resistant construction and must be connected and tested by a qualified electrician.
We work across PA23 — Dunoon itself and places including Sandbank, Innellan, Kilmun and Blairmore. Dunoon is fairly self-contained, with no other large town within about 20 miles.
Local details
- Area
- Argyll and Bute, Scotland
- Roads authority
- Argyll and Bute Council (local roads)
- Planning authority
- Argyll and Bute Council
- Postcodes
- PA23
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £845
- Survey
- Free, with a fixed written quote
What lighting bollards cost in Dunoon
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); no regional adjustment. Guide only — the fixed price follows a survey.
Where lighting bollards go in around Dunoon
Common uses in a place like Dunoon:
- Steps, ramps and changes in level
- Private gardens and long driveways
- Building entrances and approach routes
What we check first in Dunoon
In Scotland the council is the roads authority for local roads, which in Dunoon means Argyll and Bute Council. Lighting bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
If your site in Dunoon is listed or inside a conservation area, check with the local planning authority (Argyll and Bute Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Most of the work in a lighting bollard scheme is underground. Cable trenches run between every position and back to the supply, often crossing paths, drives and planting, so the routes are planned to minimise cuts through hard surfaces and to avoid existing gas, water and telecoms services.
- Have the electrical installation designed, installed, tested and certified by a qualified electrician to BS 7671.
- Choose IP and IK ratings that suit the location, and do not rely on lighting bollards as vehicle barriers.
From survey to handover
Set the bases
Anchor cages or foundations are cast at each position with the cable entry in the right place, set level so each bollard stands plumb.
Test, aim and certify
The circuit is tested and certified, bollards are checked at night for coverage and glare, and asymmetric heads are turned to face the path.
Reinstate
Trenches are backfilled and surfaces made good, whether paving, tarmac, gravel or turf.
Choosing the right spec
| Option | Detail |
|---|---|
| Solar bollards | Self-contained with panel and battery; no cabling. Suited to markers and low-use routes where lower output is acceptable. |
| Light distribution | 360-degree, asymmetric or louvred heads to light paths while limiting glare and light spill. |
| Fixings | Anchor cages cast in concrete, base plates on existing slabs, or ground spikes for garden models. |
Pricing lighting bollards in Dunoon
When we price lighting bollards in Dunoon, these make the biggest difference:
- Number of bollards and their specification
- Length of cable routes and surfaces to be cut
- Controls such as photocells, timers or sensors
Looking after them
Photocells and timers need resetting when the clocks change unless they adjust automatically. LED lighting bollards need far less maintenance than older lamp types, but they are not maintenance-free.
For damaged or loose posts in Dunoon, repairs and replacements are priced in writing first.
Questions about lighting bollards in Dunoon
Do you install lighting bollards in Dunoon?
We cover all of Dunoon (PA23) and the rest of Argyll and Bute.
Who gives permission for bollards on the pavement in Dunoon?
Dunoon falls under Argyll and Bute Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
What's a typical price for lighting bollards in Dunoon?
In Dunoon, typically £345–£1,195 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £845 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
What IP rating do outdoor bollard lights need?
Usually at least IP65 for rain and splashing, and higher where water may collect or fittings are hosed down. Ask for the rating of the complete fitting, not just the LED module.
Will lighting bollards survive in a car park?
Choose robust bodies with a high impact rating and place them where vehicles are unlikely to hit them, such as behind kerbs or alongside protective posts. A lighting bollard is not designed to stop a car.