Scotland · 4 towns
Lighting bollard installation in East Dunbartonshire
Lighting bollards for sites across East Dunbartonshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageLighting bollards in East Dunbartonshire
Low-level LED bollard lights for paths, car parks, entrances and gardens, installed with a qualified electrician. We cover East Dunbartonshire — Bearsden, Bishopbriggs, Kirkintilloch and Milngavie.
Highway and roads authorities for local roads in East Dunbartonshire: East Dunbartonshire Council.
Choose your town in East Dunbartonshire
Guide prices in East Dunbartonshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); no regional adjustment. Guide only — the fixed price follows a survey.
Local authorities across East Dunbartonshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Bearsden | East Dunbartonshire Council | East Dunbartonshire Council |
| Bishopbriggs | East Dunbartonshire Council | East Dunbartonshire Council |
| Kirkintilloch | East Dunbartonshire Council | East Dunbartonshire Council |
| Milngavie | East Dunbartonshire Council | East Dunbartonshire Council |
Rules for lighting bollards in Scotland
Works in a public road or footway need the roads authority's written consent under the Roads (Scotland) Act 1984. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.
Details and sources: bollard rules in Scotland.
How installation works
Dig cable routes
Trenches are dug between bollard positions and the supply point, avoiding existing services, with cable or duct laid at a suitable depth and warning tape above.
Electrical connection
A qualified electrician installs the circuit protection, makes the connections in weatherproof enclosures and fits controls such as a photocell or timer.
Test, aim and certify
The circuit is tested and certified, bollards are checked at night for coverage and glare, and asymmetric heads are turned to face the path.
Reinstate
Trenches are backfilled and surfaces made good, whether paving, tarmac, gravel or turf.
Lighting bollards in East Dunbartonshire: FAQs
Do you cover all of East Dunbartonshire for lighting bollards?
Yes — including Bearsden, Bishopbriggs, Kirkintilloch and Milngavie. Enter your postcode in the price calculator to confirm.
How much do lighting bollards cost in East Dunbartonshire?
In East Dunbartonshire, typically £345–£1,195 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £845 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in East Dunbartonshire?
The council is the roads authority for local roads (East Dunbartonshire Council); Transport Scotland covers trunk roads. Works in a public road need the roads authority's written consent.
What IP rating do outdoor bollard lights need?
Usually at least IP65 for rain and splashing, and higher where water may collect or fittings are hosed down. Ask for the rating of the complete fitting, not just the LED module.
How far apart should lighting bollards be?
That depends on the light output, beam pattern and how evenly the path needs to be lit. Spacing is worked out from the product's light data rather than a fixed distance. Too far apart leaves dark patches between pools of light.