East Sussex · England
Lighting bollard installation in Hastings
Lighting bollards for sites across Hastings and the rest of East Sussex, from the first measurement to the last relaid paving block.
Computer-generated imageHastings lighting bollards
Lighting bollards suit plenty of Hastings sites, leisure centres, college campuses and housing association car parks among them. Low-level LED bollard lights for paths, car parks, entrances and gardens, installed with a qualified electrician.
We work across TN34, TN37, TN38 and TN35 — Hastings itself and places including Fairlight and Bachelor's Bump. Nearby, we also work in Bexhill-on-Sea (4.8 miles), Hailsham (14.1 miles), Eastbourne (14.2 miles) and Seaford (21.6 miles), measured as the crow flies. It sits roughly 31 miles from Brighton as the crow flies.
Hastings at a glance
- Area
- East Sussex, England
- Highway authority
- East Sussex County Council (local roads)
- Planning authority
- the council for Hastings
- Postcodes
- TN34, TN37, TN38 and TN35
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £895
- Survey
- Free, with a fixed written quote
- Nearby
- Bexhill-on-Sea (4.8 mi), Hailsham (14.1 mi), Eastbourne (14.2 mi), Seaford (21.6 mi)
Lighting bollards in Hastings: common uses
Typical reasons Hastings sites choose lighting bollards:
- Car park walkways and pedestrian crossings
- Hotel, restaurant and pub frontages
- Steps, ramps and changes in level
Guide prices for Hastings
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); +6% for South East. Guide only — the fixed price follows a survey.
What we check first in Hastings
The highway authority for local roads in Hastings is East Sussex County Council; motorways and trunk roads sit with National Highways. Lighting bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Hastings) first — we flag this at survey.
Cable is protected by armour or duct, buried deep enough to avoid garden tools and future paving works, and marked with warning tape. Cable trenches run between every position and back to the supply, often crossing paths, drives and planting, so the routes are planned to minimise cuts through hard surfaces and to avoid existing gas, water and telecoms services.
- Choose IP and IK ratings that suit the location, and do not rely on lighting bollards as vehicle barriers.
- Limit glare and upward light, and check for any planning or ecology conditions on lighting near sensitive habitats.
Installation, step by step
Dig cable routes
Trenches are dug between bollard positions and the supply point, avoiding existing services, with cable or duct laid at a suitable depth and warning tape above.
Set the bases
Anchor cages or foundations are cast at each position with the cable entry in the right place, set level so each bollard stands plumb.
Test, aim and certify
The circuit is tested and certified, bollards are checked at night for coverage and glare, and asymmetric heads are turned to face the path.
Finishes and options
| Option | Detail |
|---|---|
| Colour temperature | Warm white for residential and amenity areas; warmer or amber options near sensitive wildlife habitats. |
| Solar bollards | Self-contained with panel and battery; no cabling. Suited to markers and low-use routes where lower output is acceptable. |
| Fixings | Anchor cages cast in concrete, base plates on existing slabs, or ground spikes for garden models. |
Pricing lighting bollards in Hastings
Two Hastings jobs with the same number of posts can price quite differently. The usual reasons:
- Number of bollards and their specification
- Length of cable routes and surfaces to be cut
- Distance from the supply and circuit requirements
Keeping them working
A periodic electrical inspection checks that connections and protection are still sound. Photocells and timers need resetting when the clocks change unless they adjust automatically.
We can also service, repair or replace existing posts anywhere in Hastings.
Lighting bollards in Hastings: FAQs
Can you install lighting bollards anywhere in Hastings?
We cover all of Hastings (TN34, TN37, TN38 and TN35) and the rest of East Sussex. We also work in Bexhill-on-Sea, Hailsham and Eastbourne.
Who gives permission for bollards on the pavement in Hastings?
In Hastings, work on adopted pavements and verges needs consent from East Sussex County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for lighting bollards in Hastings?
In Hastings, typically £365–£1,245 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £895 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Will lighting bollards survive in a car park?
Choose robust bodies with a high impact rating and place them where vehicles are unlikely to hit them, such as behind kerbs or alongside protective posts. A lighting bollard is not designed to stop a car.
How far apart should lighting bollards be?
That depends on the light output, beam pattern and how evenly the path needs to be lit. Spacing is worked out from the product's light data rather than a fixed distance. Too far apart leaves dark patches between pools of light.